Metalworking tools

Hand-held disposable nut tap Size and incline: according to the selected variant Fitting: ISO2 Material: HSS - High speed steel Standard: DIN357 Dimensions: - see attached catalog sheet

Holder for socket drill ČSN221414 or reamers ČSN221432, ČSN221435, ČSN221447 Clamping diameter for reamer / drill: according to selected variant Morse taper: according to the selected variant Material: Structural steel - cemented, hardened Standard: ČSN241210 / 24 1210 / DIN217 / DIN 217 / ISO 2402 The holder includes a carrier ČSN241210.10 Usage info: Scanning of countersinks and reamers is performed by a nut located behind the carrier.

Fixed turning mandrel with driving surfaces / conical clamping mandrel Nominal diameter d: according to the selected variant Other dimensions and dimensions - see product description for individual variants Kuželovist: 1: 2000 Standard: made according to DIN, resp. replacement for ČSN 243350, see drawing Turning mandrels are made of high quality steel, hardened and ground The thorns are conical The size of the mandrel is marked on the larger diameter side Mandrels are mainly used for machining smaller rotating objects that already have a machined hole The object to be machined slides on the smaller side of the mandrel and moves until it is caught on the conical surface of the mandrel To achieve greater accuracy, it is recommended to clamp the mandrel between the points. The rotation is then ensured by a heart carrier, which is attached to the side of the mandrel with a flat.

Ratchet beam for taps, tap ratchets, tap ratchets Clamping range: according to the selected variant Beam length (short / long) - according to the selected variant It is possible to switch right and left

Fixed turning mandrel with driving surfaces / conical clamping mandrel Trn comes from above-standard stock, manufacturer Zbrojovka Vsetín, may not be in 100% condition, may be used. Nominal diameter d: according to the selected variant Other dimensions - see product description for individual variants / on request Conic: 1:2000 Lathe mandrels are made of high quality steel, hardened and ground Thorns are conical The size of the mandrel is marked on the side of the larger diameter Mandrels are mainly used when machining smaller rotary objects that already have a hole machined The workpiece slides onto the smaller side of the mandrel and moves until it catches on the conical face of the mandrel To achieve greater accuracy, it is recommended to clamp the mandrel between the tips. Rotation is then ensured by a heart driver, which is attached to the side of the mandrel equipped with a flat surface. Standard: ČSN 243350

Threaded dies with jaws / threaded jaws Thread type: R or also Rc or BSPT (British Standard Pipe Taper) - tubular inch thread with conical profile Conicity: 1:16 Climb: in numbers of turns per inch Top angle: 55 ° Material: HSS - High speed steel Dimensions - see attached catalog sheet Standard: ISO-7/1, DIN 24230 Usage: Well machinable materials up to 800 N / mm2 Non-alloy and low-alloy steels

Discharge wedge for tools with driver - Morse cone For punching tools with a morse taper: according to the selected variant Standard: ČSN 241279 / CSN 24 1279 or DIN317 / DIN 317 Supplied black

Milling mandrel, mandrel for attaching socket cutters, for socket cutters with clamping on stones Clamping cone: according to the selected variant Clamping diameter for cutters: according to the selected variant Other dimensions: see product description for individual variants Standard: PN241441 Suitable for older (Czech) spindles of milling machines, where the tool is carried over the nut in addition to the thread.

Miller for grooves of cutting pens Diameter: according to the selected variant Blade width: according to the selected variant Other dimensions - see product description for individual variants Material: HSS Standard: company standard Zbrojovka Vsetín, replacement for ČSN 222185

New, unused radius cutter, hollow quarter circle with cylindrical shank Radius: according to the selected variant Other dimensions - see the attached catalog sheet Standard: ČSN 222226 / 22 2226 Resale - only a limited number of pieces

Reducing short drill sleeve / insert Outer cone: according to the selected variant Inner cone: according to the selected variant Standard: ČSN 241240/24 1240, DIN2185 Reducing insert, ie reduces the cone in the spindle to a smaller one, ie it is used to clamp a tool with a smaller Morse taper.

Reducing short drill sleeve / insert Outer cone: according to the selected variant Inner cone: according to the selected variant Standard: ČSN 241240/24 1240, DIN2185 Reducing insert, ie reduces the cone in the spindle to a smaller one, ie it is used to clamp a tool with a smaller Morse taper.