Metalworking tools

Internal corner turning knife with HSS cutting edge Clamping square: according to the selected variant Other dimensions - see product description for each variant Standard: DIN4954 / replacement for ČSN 223548/22 3548, all sizes are soldered Blade material: 19 830 - HSS steel suitable for nitriding. For highly stressed tools for machining materials with medium and higher strength, especially for tools requiring particularly good toughness Knife body material: 12 061

Socket semi-coarse tooth cutter - ground Diameter: according to the selected variant Height: according to the selected variant Clamping diameter: according to the selected variant Helix angle: 30° Head angle: 12° Other dimensions - see the attached catalog sheet Material: HSSCo8 - ground cutter Standard: PN 222052 / ČSN 222052, DIN1880 N, ISO 2780/2586 Type N : Universal use. Suitable for materials up to 900 Mpa strength Usage : Automatic and structural steels up to 600 MPa Structural and cast steels up to 850 MPa Low-alloy tool steels up to 1100 MPa Refined steels up to 900 MPa High-alloy tool steels up to 1100 MPa Cast iron above 240 HB Stainless steel up to 850 MPa Order no. code - series: 620278V

Semi-coarse-toothed disc milling cutter Diameter of the cutter: according to the selected variant Width of the milling cutter: according to the selected variant Clamping diameter: according to the selected variant Other dimensions - see the attached catalog sheet Material: HSSE (i.e. HSS + Co5, HSSCo5) Standard: DIN 885 A / ZPS 720275 Type N : Universal use. Suitable for materials up to 900 Mpa strength. Order no. code - series: 720275

Semi-coarse-toothed disc cutter with two wedging grooves Diameter of the cutter: according to the selected variant Width of the milling cutter: according to the selected variant Clamping diameter: according to the selected variant Other dimensions - see product description for individual variants Material: HSS, or HSSE - depending on the selected variant Standard: PN222161

Semi-coarse-toothed disc cutter with two wedging grooves Diameter of the cutter: according to the selected variant Width of the milling cutter: according to the selected variant Clamping diameter: according to the selected variant Other dimensions - see the attached catalog sheet Material: HSSE (i.e. HSS + Co5, HSSCo5) Standard: PN222161 / ZPS 720373 Type N : Universal use. Suitable for materials up to 900 Mpa strength. Order no. code - series: 720373

Narrow disc cutter Diameter of the cutter: according to the selected variant Width of the milling cutter: according to the selected variant Clamping diameter: according to the selected variant Other dimensions - see the attached catalog sheet Material: HSSE (i.e. HSS + Co5, HSSCo5) Standard: ZPS 726275 Type N : Universal use. Suitable for materials up to 900 Mpa strength. Order no. code - series: 726275

Fine-tooth disc milling cutter Diameter of the cutter: according to the selected variant Width of the milling cutter: according to the selected variant Clamping diameter: according to the selected variant Other dimensions - see the attached catalog sheet Material: HSS Standard: DIN 885 A Order no. code - series: 730270

Fine-tooth disc milling cutter Diameter of the cutter: according to the selected variant Width of the milling cutter: according to the selected variant Clamping diameter: according to the selected variant Other dimensions - see the attached catalog sheet Material: HSSE (i.e. HSS + Co5, HSSCo5) Standard: DIN 885 A Type H : Intended for milling (finishing) materials of medium to higher strength up to 1200 Mpa. Machining Ra 3.2 and exceptionally 1.6. Order no. code - series: 730275

Fine-tooth disc milling cutter Diameter of the cutter: according to the selected variant Width of the milling cutter: according to the selected variant Clamping diameter: according to the selected variant Other dimensions - see the attached catalog sheet Material: HSSE (i.e. HSS + Co8, HSSCo8) Standard: DIN 885 A Type H : Intended for milling (finishing) materials of medium to higher strength up to 1200 Mpa. Machining Ra 3.2 and exceptionally 1.6. Order no. code - series: 730278

Fine-tooth disc cutter with two wedging grooves Diameter of the cutter: according to the selected variant Width of the milling cutter: according to the selected variant Clamping diameter: according to the selected variant Helix angle: 10° Head angle: 10° Material: HSS Standard: ČSN 222165, corresponds to DIN885 and ISO 2587

Fine-tooth disc cutter with two wedging grooves Diameter of the cutter: according to the selected variant Width of the milling cutter: according to the selected variant Clamping diameter: according to the selected variant Helix angle: 10° Head angle: 10° Material: HSSE (i.e. HSS + Co5, HSSCo5) Standard: ČSN 222165, corresponds to DIN885 and ISO 2587 / ZPS 730373 Type H : Intended for milling (finishing) materials of medium to higher strength up to 1200 Mpa. Machining Ra 3.2 and exceptionally 1.6. Order no. code - series: 730373

Disc cutter for grooves, with two wedge grooves Diameter of the cutter: according to the selected variant Width of the cutter: according to the selected variant Clamping diameter: according to the selected variant Next dimensions - see product description for individual variants Helix angle: 10° Face angle: 10° Material: HSS ( unless otherwise stated) Standard : ČSN 222168