Metalworking tools

Adapter for clamping chuck in hammer drill or hammer hammer with SDS clamp Pin Thread: 1/2 "x20 UNF Clamping Procedure: Remove the screw from the mandrel with the cross head -

Protective goggles dark Material: plastic

Tube 8mm Thread M14x2 (standard for angular grinders) Suitable for example for clamping a wire disc into a drill .... There is not a brush or a velcro fastener

Universal Drilling Machine 115mm | This carrier is designed for magnetless wheels without velcro. This grinding wheel is equipped with a M14x2 thread = it is compatible with the angle grinder or can also be used in the drill.

Universal 125 mm Diameter Carrier Abrasive Carrier / Fiber Disk Holder | This carrier is designed for magnetless wheels without velcro. This grinding wheel is equipped with a M14x2 thread = it is compatible with the angle grinder or can also be used in the drill.

Universal Diameter Bearing 150mm Abrasive Carrier / Fiber Disk Holder | This carrier is designed for magnetless wheels without velcro. This grinding wheel is equipped with a M14x2 thread = it is compatible with the angle grinder or can also be used in the drill.

Grinding Wheel for Metal Wheel Diameter: 230mm Wheel Power: 6mm Mounting Diameter: 22.2mm (Classic) Max. speed: 6000 rpm

Soft Velcro fastener 75 mm Abrasive cutter carrier. Thorough cuts, polishing lambs and felt polishing wheels can be done. This grinding wheel is equipped with a M14x2 thread = it is compatible with the angle grinder or can also be used in the drill. The drill bit is 6mm in diameter

Foam polishing disc Diameter 85mm Height 25mm Suitable for fine polishing of paint, plastic, car lights / lamps with a suitable paste

Foam polishing disc Diameter 125mm Height 25mm Suitable for fine polishing of paint, plastic, car lights / lamps with suitable paste

Felt disc Diameter 100mm, thickness 15mm Application: grinding and polishing of metals and plastics, especially small parts Grinding: Satimax wheel of the grain size Polishing: polishing wheel disc according to polished material < The disc is also suitable for polishing small parts - screws and nuts - it does not remove them from the hand as well as cloth discs. The clamping pin with washers is included in the scope of delivery. The diameter of the clamping portion of the mandrel is 6.5 mm

Set of polishing material For grinding and polishing of wood, steel, plastic, copper, nickel, zinc, sheet The set consists of the following components: 1. disc diameter 100mm, thickness 13mm, hole 12,7mm 2. Ribbed disc with 100mm diameter 3. abrasive paste (blue) - 100g 4. paste polishing (white) - 100g 5. clamping mandrel for clamping the blades into the drill. Shank diameter 6mm Max. 3000 revolutions per minute