Metalworking tools

Retracting / clamping / end screw of tool shanks with taper ISO 50 ( 7:24 ) for automatic exchange / pulling pin , screw M24 , M24x45° , with hole - drilled MAS BT50 x 45° with hole for cooling Top angle of the pin (lower part) : 45° Top angle of the pin (upper part) : 30° d1: 23mm d2: 17mm d3: 25mm l1: 85mm l2: 45mm l3: 35mm a° : 45° Standard: JIS B 6339, MAS403-1982 Suitable for example for HAAS Material: - according to ČSN: 14 140 - according to DIN: 41Cr4/42Gr4 - according to EN: 41Cr4

Carbide ( TK ) slotting cutter Number of blades: 2 pcs. Diameter of working part: 1mm Length of working part: 3.0mm Total length: 50mm Screw: 35° Clamp shank: 4mm Carbide: fine-grained carbide Coating: PVD ( AlTiCrN ) Blade diameter tolerance: -0.015mm for cutters up to a diameter of 5mm (including) -0.020mm for cutters from a diameter of 6mm (including) Usage: Grooving cutter, the cutter has 1 cutting edge through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, stainless steel and austenitic steels up to 50 HRC Suitable also for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) slotting cutter Number of blades: 2 pcs. Diameter of the working part: 2.5mm Length of the working part: 7.0mm Total length: 50mm Screw: 35° Clamping shank: 4mm Carbide: fine-grained carbide Coating: PVD ( AlTiCrN ) Blade diameter tolerance: -0.015mm for cutters up to a diameter of 5mm (including) -0.020mm for cutters from diameter 6mm (including) Usage: Slotting cutter, the cutter has 1 cutting edge through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, stainless steel and austenitic steels up to 50 HRC Suitable also for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) slotting cutter Number of blades: 2 pcs. Diameter of the working part: 3mm Length of the working part: 9.0mm Total length: 50mm Screw: 35° Clamp shank: 4mm Carbide: fine-grained carbide Coating: PVD ( AlTiCrN ) Blade diameter tolerance: -0.015mm for cutters up to a diameter of 5mm (including) -0.020mm for cutters from a diameter of 6mm (including) Usage: Grooving cutter, the cutter has 1 cutting edge through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, stainless steel and austenitic steels up to 50 HRC Suitable also for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) slotting cutter Number of blades: 2 pcs. Diameter of the working part: 4mm Length of the working part: 11.0mm Total length: 50mm Screw: 35° Clamping shank: 4mm Carbide: fine-grained carbide Coating: PVD ( AlTiCrN ) Blade diameter tolerance: -0.015mm for cutters up to a diameter of 5mm (including) -0.020mm for cutters from a diameter of 6mm (including) Usage: Grooving cutter, the cutter has 1 cutting edge through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, stainless steel and austenitic steels up to 50 HRC Suitable also for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) slotting cutter Number of blades: 2 pcs. Diameter of working part: 5mm Length of working part: 13.0mm Total length: 50mm Screw: 35° Clamp shank: 6mm Carbide: fine-grained carbide Coating: PVD ( AlTiCrN ) Blade diameter tolerance: -0.015mm for cutters up to a diameter of 5mm (including) -0.020mm for cutters from a diameter of 6mm (including) Usage: Grooving cutter, the cutter has 1 cutting edge through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, stainless steel and austenitic steels up to 50 HRC Suitable also for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) slotting cutter Number of blades: 2 pcs. Diameter of the working part: 6mm Length of the working part: 16.0mm Total length: 50mm Screw: 35° Clamping shank: 6mm Carbide: fine-grained carbide Coating: PVD ( AlTiCrN ) Blade diameter tolerance: -0.015mm for cutters up to a diameter of 5mm (including) -0.020mm for cutters from a diameter of 6mm (including) Usage: Grooving cutter, the cutter has 1 cutting edge through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, stainless steel and austenitic steels up to 50 HRC Suitable also for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) slotting cutter Number of blades: 2 pcs. Diameter of working part: 12mm Length of working part: 30.0mm Total length: 75mm Screw: 35° Clamp shank: 12mm Carbide: fine-grained carbide Coating: PVD ( AlTiCrN ) Blade diameter tolerance: -0.015mm for cutters up to a diameter of 5mm (including) -0.020mm for cutters from a diameter of 6mm (including) Usage: Grooving cutter, the cutter has 1 cutting edge through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, stainless steel and austenitic steels up to 50 HRC Suitable also for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) slotting cutter Number of blades: 2 pcs. Diameter of the working part: 14mm Length of the working part: 35.0mm Total length: 100mm Screw: 35° Clamping shank: 14mm Carbide: fine-grained carbide Coating: PVD ( AlTiCrN ) Blade diameter tolerance: -0.015mm for cutters up to a diameter of 5mm (including) -0.020mm for cutters from a diameter of 6mm (including) Usage: Grooving cutter, the cutter has 1 cutting edge through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, stainless steel and austenitic steels up to 50 HRC Suitable also for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) milling cutter for universal milling Number of cutting edges: 4 pcs. Diameter of the working part: 1.5mm Length of the working part: 4.0mm Total length: 50mm Screw: 35° Clamping shank: 4mm Carbide: fine-grained carbide Coating: PVD ( AlTiCrN ) Blade diameter tolerance: -0.015mm for cutters up to a diameter of 5mm (including) -0.020mm for cutters from diameter 6mm (including) Usage: Universal milling (roughing and finishing operations) , the cutter has 2 cutting edges through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, stainless steels and austenitic steels up to 50 HRC Suitable also for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) milling cutter for universal milling Number of cutting edges: 4 pcs. Diameter of working part: 2mm Length of working part: 6.0mm Total length: 50mm Screw: 35° Clamp shank: 4mm Carbide: fine-grained carbide Coating: PVD ( AlTiCrN ) Blade diameter tolerance: -0.015mm for cutters up to a diameter of 5mm (including) -0.020mm for cutters from a diameter of 6mm (including) Usage: Universal milling (roughing and finishing operations) , the cutter has 2 cutting edges through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, stainless steels and austenitic steels up to 50 HRC Suitable also for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) milling cutter for universal milling Number of cutting edges: 4 pcs. Diameter of the working part: 2.5mm Length of the working part: 7.0mm Total length: 50mm Screw: 35° Clamping shank: 4mm Carbide: fine-grained carbide Coating: PVD ( AlTiCrN ) Blade diameter tolerance: -0.015mm for cutters up to a diameter of 5mm (including) -0.020mm for cutters from diameter 6mm (including) Usage: Universal milling (roughing and finishing operations) , the cutter has 2 cutting edges through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, stainless steels and austenitic steels up to 50 HRC Suitable also for thermal and hydro clamping Cutting conditions - see attached photo