Metalworking tools
-
Turning
-
Milling
-
Drilling
-
Thread cutting
-
Reaming and drilling
-
Countersinking and needling
-
Broaching
-
Yours - thermdrill
-
Welding
-
Grinding, cutting and polishing of metal
-
Stretching and extrusion
-
Řezné oleje, tuky a odlučovače
-
Set of 24 pairs of milling pads - 125mm x 8/10/12/14 mm
Milling Washers, Vices, Milling Washers Set of 24 Pairs 125mm Dimensions of Single Washers: 8 x (11, 16, 21, 26, 31) , 36mm) 10 x (13, 18, 23, 28, 33, 38mm) 12 x (15, 20, 25, 30, 35, 40mm) , 32, 37, 42mm) Accuracy: 0,01mm Flatness: 0,005mm Hardness 55 HRC
On request236,17 € with VAT -
Set of 14 pairs of milling pads - 150mm x 8mm
Home washers milling (milling Pad) pad in a vice, milling pads set of 14 pairs with a length of 150 mm Home washers Dimensions: 8x14, 8x16, 8x18, 8x20, 8x22, 8x24, 8x26, 8x28, 8x30, 8x32, 8x35, 8x40, 8x45, 8x50 mm Accuracy: 0,01mm Flatness: 0,005mm Hardness 55 HRC
In stock130,55 € with VAT -
Retention knob ISO30 - BT30, 30° / 60°, MAS403, BT-502
Home Intake / clamp / end pin stopwatch tool taper ISO 30 (7:24) for the automatic exchange / pull plug, M12 screw, M12x30 ° MAS BT30 x 30 ° / MAS BT30 x 60 < br> Top pin angle (bottom): 30 °, resp. (90 ° - a °) Top Peg Angle (Upper): 30 ° d1: 11mm d2: 7mm d3: 12.5mm l1: 43mm l2 : 23mm l3: 18mm a °: 60 ° JIS B 6339, MAS403-1982 DIN: 41Cr4 / 42Gr4 < br> - according to EN: 41Cr4
In stock5,98 € with VAT -
Retention knob ISO30 - BT30, 45°, MAS403, BT-501
Retracting / clamping / end screw of tool shanks with ISO 30 taper ( 7:24 ) for automatic exchange / pulling pin, screw M12, M12x45° MAS BT30 x 45° Peak angle of the pin (lower part): 45°, or (90° - a°) Top angle of the pin (upper part) : 30° d1: 11mm d2: 7mm d3: 12.5mm l1: 43mm l2: 23mm l3: 18mm a° : 45° Standard: JIS B 6339, MAS403-1982 Material: - according to ČSN: 14 140 - according to DIN: 41Cr4/42Gr4 - according to EN: 41Cr4
In stock8,26 € with VAT -
Retention knob ISO40 - BT40, 30° / 60°, MAS403, BT-504
BT40 x 30 ° MAS BT40 x 60 ° < br> Top pin angle (bottom): 30 °, resp. (90 ° - a °) Top Peak Angle (Top): 30 ° d1: 15mm d2: 10mm d3: 17mm l1: 60mm l2: 35mm l3: 28mm a °: 60 ° Norms: JIS B 6339, MAS403-1982 DIN: 41Cr4 / 42Gr4 - according to EN: 41Cr4
In stock6,69 € with VAT -
Retention knob ISO40 - BT40, 45°, MAS403, BT-503
Retracting / clamping / end screw of tool shanks with ISO 40 taper ( 7:24 ) for automatic exchange / pulling pin, screw M16, M16x45° MAS BT40 x 45° Peak angle of the pin (lower part): 45°, or (90° - a°) Top angle of the pin (upper part) : 30° d1: 15mm d2: 10mm d3: 17mm l1: 60mm l2: 35mm l3: 28mm a° : 45° Standard: JIS B 6339, MAS403-1982 Suitable for example for HAAS Material: - according to ČSN: 14 140 - according to DIN: 41Cr4/42Gr4 - according to EN: 41Cr4
In stock5,67 € with VAT -
Retention knob ISO40 - BT40, 45°, MAS403, drilled for HAAS / HURCO
Retracting / clamping / end screw of tool shanks with ISO 40 taper ( 7:24 ) for automatic exchange / pulling pin, screw M16, M16x45° with hole for coolant - drilled MAS BT40 x 45°, shortened Peak angle of the pin (lower part): 45°, or (90° - a°) Top angle of the pin (upper part) : 30° d1: 15mm d2: 10mm d3: 17mm l1: 57mm l2: 32mm l3: 25mm a° : 45° Standard: JIS B 6339, MAS403-1982 Suitable for example for HAAS / HURCO Material: - according to ČSN: 14 140 - according to DIN: 41Cr4/42Gr4 - according to EN: 41Cr4
In stock7,16 € with VAT -
Retention knob ISO40 - BT40, 45°, MAS403 for HAAS / HURCO
Retracting / clamping / end screw of tool shanks with ISO 40 taper ( 7:24 ) for automatic exchange / pulling pin, screw M16, M16x45° MAS BT40 x 45°, shortened Peak angle of the pin (lower part): 45°, or (90° - a°) Top angle of the pin (upper part) : 30° d1: 15mm d2: 10mm d3: 17mm l1: 57mm l2: 32mm l3: 25mm a° : 45° Standard: JIS B 6339, MAS403-1982 Suitable for example for HAAS Material: - according to ČSN: 14 140 - according to DIN: 41Cr4/42Gr4 - according to EN: 41Cr4
In stock10,66 € with VAT -
Retention knob ISO40 - BT40, 45°, MAS403, drilled, BT-516
Retraction / clamping / end screw of tool shanks with taper ISO 40 ( 7:24 ) for automatic exchange / pulling pin, screw M16, M16x45°, with hole - drilled MAS BT40 x 45° sealed with cooling hole Peak angle of the pin (lower part): 45°, or (90° - a°) Top angle of the pin (upper part) : 30° d1: 15mm d2: 10mm d3: 17mm l1: 60mm l2: 35mm l3: 28mm a° : 45° Standard: JIS B 6339, MAS403-1982 Suitable for example for HAAS Material: - according to ČSN: 14 140 - according to DIN: 41Cr4/42Gr4 - according to EN: 41Cr4
In stock8,60 € with VAT -
Retention knob ISO40 - BT40, 45°, MAS403, drilled with seal
Retracting / clamping / end screw of tool shanks with ISO 40 taper (7:24) for automatic exchange / pulling pin, screw M16, M16x45° with gasket, with hole - drilled MAS BT40 x 45° sealed with cooling hole Peak angle of the pin (lower part): 45°, or (90° - a°) Top angle of the pin (upper part) : 30° d1: 15mm d2: 10mm d3: 17mm l1: 60mm l2: 35mm l3: 28mm a° : 45° Standard: JIS B 6339, MAS403-1982 Suitable for example for HAAS Material: - according to ČSN: 14 140 - according to DIN: 41Cr4/42Gr4 - according to EN: 41Cr4
On request14,08 € with VAT -
Retention knob ISO50 - BT50, 30° / 60°, MAS403, BT-506
MAS BT50 x 30 ° / MAS BT50 x 60 ° < br> Top pin angle (bottom): 30 °, resp. (90 ° - a °) Top Peak Angle (Top): 30 ° d1: 23mm d2: 17mm d3: 25mm l1: 85mm l2: 45mm l3: 35mm a °: 60 ° Norms: JIS B 6339, MAS403-1982 DIN: 41Cr4 / 42Gr4 - according to EN: 41Cr4
In stock12,02 € with VAT
