Metalworking tools

Rotary positioner / rotary table for cooking After gripping the welded object on the plate(into the chuck - not included) Â!Vky) you can set the object to the desired position and change it during welding. Possibility of setting: the speed of rotation of the object in the range of 0.2-2 rpm. Automatic rotation by pre-selected angle Possibility to change positions to horizontal or vertical Operating voltage: 230V Diameter turns: 350mm Rotation speed: 0.2-2 rpm. Max.load of table in horizontal position: 100kg Max.load of table in vertical position: 50kg Size of positioner: 540x440x475mm Weight 45kg Centering hole diameter: 50mm

Rotary positioner / rotary table for cooking After gripping the welded object on the plate(into the chuck - not included) Â!Vky) you can set the object to the desired position and change it during welding. Possibility of setting: the speed of rotation of the object in the range of 0.2-2 rpm. Automatic rotation by pre-selected angle Possibility to change positions to horizontal or vertical Operating voltage: 230V Diameter turns: 450mm Rotation speed: 0.2-2 rpm. Max. table load in horizontal position: 300kg Max. table load in vertical position: 150kg Positioner size: 740x480x530mm Weight 58kg Centering hole diameter: 50mm

Abrasive fleece green, coarse Sheet measuring 125x230mm This fleece is also called "Scotch-Brite". This is a sponge to remove dirt from various surfaces. Possibility of rinsing and reuse.

Abrasive fleece gray, fine Arch measuring 125x230mm This fleece is also called "Scotch-Brite". This is a sponge to remove dirt from various surfaces. Possibility of rinsing and reuse.

Spherical sanding fleece Diameter 100mm Roughness 240 Color: green Shank

Spherical sanding fleece Diameter 100mm Roughness 320 Color: burgundy

4-piece brush set with hexagonal shank The brushes are made of polypropylene. Excellent for car detailing - cleaning seats, rugs, bicycles, but they can also be used in the garden, in the workshop or in the home(chains, floors, sanitary equipment ) .....(see video by link) All brushes are equipped with a hexagonal shank 6mm. It is so possible to use them in electric and cordless drills cleaning without scratching the surface - the bristles have a roughness approximately like a toothbrush Material: polypropylene Shank: hexagon 6mm - fits into a cordless drill Set contains 3 round brushes(diameters 5mm / 10mm and 12mm ) and 1 rotary brush(diameter 8.9mm)

Holder for round radeco knives - lathe knives with cylindrical shank The holder is double-sided, on both sides with a tight diameter of 8mm Clamped on the clamping principle !N Holder dimensions: 11x11mm Total length: 72mm In addition to the holder, the set also contains 3 knives for a hole length of 140mm(1x internal cutters, 1x internal thread 55Â °, 1 x internal thread 60Â °) It is possible to clamp a diameter of 8mm into the holder. On this average, we have Radeca in stock both in the state of a semi-finished product, and we also have a wide range of specially modified sharpened shaped knives. You will find them in the directory: RADECO ground shaped knives

Polishing felt spherical body, folded Diameter 125mm Hex shank

Nylon brush for angle grinder Diameter: 125mm Material: nylon Hole: standard, 22.2mm

Abrasive disc grinder(combination of abrasive fleece and grout paper) - Intended for use in bench grinders Diameter 150mm, ZR 400 Clamping n: hole diameter 25mm Width: 25mm Material: fleece brown brown paper

Abrasive disc grinder(combination of abrasive fleece and grout paper) - Intended for use in bench grinders Diameter 150mm, ZR 120 Clamping n: hole diameter 25mm Width: 25mm Material: fleece green sandpaper