Metalworking tools

DW11 is a grease and grease trap remover a clear grease, grease and oil remover for industrial use. Very strong and fast drying product. It can be used safely on both stainless metal, galvanized, enamelled or aluminum surfaces. Apart from laziness, it has no dangerous properties. Applications: 1. Apply the product on a clean cloth(preferably cotton) and re-apply it at the application site. If necessary, repeat the procedure several times until surface perfectly cleaned. 2. Shiny marks must not remain on the surface after application. Packaging: 1 liter in plastic container(non-original packaging)

DW11 is a grease and grease trap remover a clear grease, grease and oil remover for industrial use. Very strong and fast drying product. It can be used safely on both stainless metal, galvanized, enamelled or aluminum surfaces. Apart from laziness, it has no dangerous properties. Applications: 1. Apply the product on a clean cloth(preferably cotton) and re-apply it at the application site. If necessary, repeat the procedure several times until surface perfectly cleaned. 2. Shiny marks must not remain on the surface after application. Packaging: 5 liters in plastic container(original packaging)

Quick machine tap M 7, straight groove Gradient: 1.0, basic Facing: ISO2 / 6H - Threaded profile Standard: ISO 529 D / DIN 13 Thread start: E, 1,5 feed - see enclosed photo Material: HSS (Cutting steel) Cutting thread profile Application: 1.2: Structural and carbon steel, low alloy steel up to 500N / mm2 1.3: Structural and carbon steel, low alloy steel, steel up to 800N / mm2

Universal soluble oil for metalworking - replacement for Paramo ERO-SB ERO 1070 Volume: 1 liter Dilution: 4 - 15% Colour: pure light brown Description : Universal water-dilutable cutting and cooling fluid, contains mineral oil with a low content of aromatic hydrocarbons, with anionic and nonionic emulsifiers and corrosion inhibitors, inhibitors for yellow metals and stabilizing agents. Usage: Universal machining fluid for all types of chip machining intended for use in a working concentration of 4-15%. Suitable for machining cast iron, aluminum and yellow metals. When mixed with water with a hardness of up to 60°dH, E13 creates a stable emulsion with excellent viscosity and excellent cooling detergent capacity. Technical and safety data sheet - see attachment. Recommended dilution : Light machining and grinding : 4-7% Medium difficult machining : 7-10% Difficult machining : 10-15% Slow pouring of the concentrate into the water with continuous mixing. Can be used in automatic mixers based on venturi tube. Storage : stable when stored at 10-25°C for 12 months, avoid freezing if possible.

Universal soluble oil for metalworking - replacement for Paramo ERO-SB ERO 1070 Volume: 5 liters Dilution: 4 - 15% Colour: pure light brown Description : Universal water-dilutable cutting and cooling fluid, contains mineral oil with a low content of aromatic hydrocarbons, with anionic and nonionic emulsifiers and corrosion inhibitors, inhibitors for yellow metals and stabilizing agents. Usage: Universal machining fluid for all types of chip machining intended for use in a working concentration of 4-15%. Suitable for machining cast iron, aluminum and yellow metals. When mixed with water with a hardness of up to 60°dH, E13 creates a stable emulsion with excellent viscosity and excellent cooling detergent capacity. Technical and safety data sheet - see attachment. Recommended dilution : Light machining and grinding : 4-7% Medium difficult machining : 7-10% Difficult machining : 10-15% Slow pouring of the concentrate into the water with continuous mixing. Can be used in automatic mixers based on venturi tube. Storage : stable when stored at 10-25°C for 12 months, avoid freezing if possible.

Universal soluble oil for metalworking - replacement for Paramo ERO-SB ERO 1070 Volume: 10 liters Dilution: 4 - 15% Colour: pure light brown Description : Universal water-dilutable cutting and cooling fluid, contains mineral oil with a low content of aromatic hydrocarbons, with anionic and nonionic emulsifiers and corrosion inhibitors, inhibitors for yellow metals and stabilizing agents. Usage: Universal machining fluid for all types of chip machining intended for use in a working concentration of 4-15%. Suitable for machining cast iron, aluminum and yellow metals. When mixed with water with a hardness of up to 60°dH, E13 creates a stable emulsion with excellent viscosity and excellent cooling detergent capacity. Technical and safety data sheet - see attachment. Recommended dilution : Light machining and grinding : 4-7% Medium difficult machining : 7-10% Difficult machining : 10-15% Slow pouring of the concentrate into the water with continuous mixing. Can be used in automatic mixers based on venturi tube. Storage : stable when stored at 10-25°C for 12 months, avoid freezing if possible.

Knife blade in case 541-090 The turning knife is only in the blade case. NOGA knives can not be used in this case, the blade can not be removed from the breech.

Electric programmable tap with adjustable arm with touch screen Range: M3-M16 Arm positionability: 130-1000mm Stroke: 600mm Speed ??max: 312 rpm. / min. The head can be tilted in two axes: 0-90 ° Power: 600W Contains 9 pcs of TC-312 adapters with torque coupling for taps made according to DIN standard: Adapters for DIN371 taps: M3, M4, M5 + M6, M8, M10 Adapters for taps DIN376: M12, M14, M16 Other tap adapters made according to DIN371 / DIN376 can be purchased separately - see related products. Touch screen, programming option: thread size selection, pitch, thread depth, speed, torque coupling, multiple cutting with regular tap removal / chip pulling,, manual or automatic thread cutting mode, speed change programmatically or manually (two buttons) , user memory where the most used settings and many other functions can be stored. Extremely quiet operation. We can also offer this type of tap in a larger version (M6-M30 and M6-M36) - on request.

Electric programmable tap with adjustable arm and touch screen Range: M6-M30 Arm positionability: 130-1000mm Stroke: 600mm Speed ??max: 180 rpm. / min. The head can be tilted in two axes: 0-90 ° Power: 1200W Contains 11 pcs of TC-820 adapters with torque coupling for taps made according to DIN standard: Adapters for taps DIN371: M6, M8, M10 Adapters for taps DIN376: M12, M14, M16, M18, M20, M22 + M24, M27, M30 Other tap adapters made according to DIN371 / DIN376 can be purchased separately - see related products. Touch screen, programming option: thread size selection, pitch, thread depth, speed, torque coupling, multiple cutting with regular tap removal / chip pulling,, manual or automatic thread cutting mode, speed change programmatically or manually (two buttons) , user memory where the most used settings and many other functions can be stored. Extremely quiet operation. We can also offer this type of tap in a smaller (M3-M16) or larger (M6-M36) - on request.

Electric programmable thread cutter with adjustable arm and touch screen Range: M6-M36 Positionability of arms: 130-1000mm Lift: 600mm Revolutions max: 180 rpm. / min. The head can be tilted in two axes: 0-90° Power: 1200W Contains 11 adapters with torque coupling for taps made according to the DIN standard: Adapters for DIN371 taps: M6, M8, M10 Adapters for DIN376 taps: M12, M14, M16, M18, M20, M22+M24, M27, M30, M33, M36 Other adapters for taps made according to the DIN371 / DIN376 standard can be purchased separately - see related products. Touch display, programming option: selection of thread size, pitch, thread depth, revolutions, torque coupling, multiple cutting with regular tap removal / extraction of chips, manual or automatic thread cutting mode, change of revolutions programmatically or manually (two buttons) , user memory where the most used settings and many other functions can be saved. Extremely quiet operation. We can also offer this type of thread in a smaller (M3-M16 or M6-M30) design (M6-M36) - see alternative products

> 1x57mm; 2x67mm; 2x77mm; 1x81mm; 2x95mm; 1x116mm Carbide material: P20 - for steel Use: - side head set - for lateral boring (inner hole wall)

Right > 1x57mm; 2x67mm; 2x77mm; 1x81mm; 2x95mm; 1x116mm Carbide material: P20 - for steel Use: - front head set - for front boring (bottom)