Metalworking tools

Custom production - min. 5pcs! BSP machine tap with spiral groove in helix, for pipe thread Size: 1/4 " Pitch: 19 feet per inch Total tap length: 200mm Top angle: 55 Â ° Form: C Material: HSS - High speed Steel Standard: DIN 5156 Application: Well machinable materials up to 800 N / mm2 Non-alloy and low-alloy steels For manual and machine use For blind holes

Custom production - min. 5pcs! BSP machine tap with spiral groove in helix, for pipe thread Size: 3/8 " Pitch: 19 feet per inch Total tap length: 200mm Top angle: 55 Â ° Form: C Material: HSS - High speed Steel Standard: DIN 5156 Application: Well machinable materials up to 800 N / mm2 Non-alloy and low-alloy steels For manual and machine use For blind holes

Set of 9 pcs ER 25 collets for taps without internal cooling Set contains collets: 3,5x2,7 - for M3 DIN371 4,5x3,4 - for M4 DIN371 6.0x4.9 - for M5 and M6 DIN371 7.0x5.5 - for M7 DIN371 8.0x6.2 - for M8 DIN371 9.0x7.0 - for M12 DIN376 10,0x8,0 - for M10 DIN371 11,0x9,0 - for M14 DIN376 12,0x9,0 - for M16 DIN376 Collet clamping procedure: Snap the collet into the clamping nut - according to the attached picture. standards: DIN 6499 A / 430GC

Set of 11 pcs ER 32 collets for taps without internal cooling Set contains collets: 3,5x2,7 - for M3 DIN371 4,5x3,4 - for M4 DIN371 6.0x4.9 - for M5 and M6 DIN371 7.0x5.5 - for M7 DIN371 8.0x6.2 - for M8 DIN371 9.0x7.0 - for M12 DIN376 10,0x8,0 - for M10 DIN371 11,0x9,0 - for M14 DIN376 12,0x9,0 - for M16 DIN376 14,0x11,0 - for M18 DIN376 16, 0x12,0 - for M20 DIN376 Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. standards: DIN 6499 A / 470GC

Set of 9 sealed ER 25 thread collets for use with internally cooled taps, ER25 collets The set includes collets : 3.5x2.7 / 4.5x3.4 / 6.0x4.9 / 7.0x5.5 / 8.0x6.2 / 9.0x7.0 / 10.0x8.0 / 11.0x9.0 / 12.0x9.0 mm , i.e. for clamping machine taps DIN371/374/376 in the range M3-M16 (with the exception of M3.5 / M7) Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. Standard: DIN 6499 GEC / 430GEC Throwability: 0.015mm Max. pressure tested by the manufacturer: 40bar

Clamping collet series: ER 16 with higher clamping accuracy Size: 1 mm Collet chuck diameter: 0.5 - 1.0 mm Clamping accuracy: 0.005mm(tested on a mandrel with a length of 6mm) Standard: DIN 6499B / 426EP For clamping drills, milling cutters, countersinks, etc. Collet size: Diameter: 16mm Length: 28mm Pliers clamping procedure tiny: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

Collet chuck series: ER 16 with higher clamping accuracy Size: 1.5 mm Collet chuck diameter: 1.0 - 1, 5mm Clamping accuracy: 0,005mm(tested on a mandrel with a length of 6mm ) Standard: DIN 6499B / 426EP For clamping drills, cutters, countersinks, etc. . Collet size: Diameter: 16mm Length: 28mm Clamping procedure collets: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

Clamping collet series: ER 16 with higher clamping accuracy Size: 2.0 mm Collet chuck diameter: 1.5 - 2, 0mm Clamping accuracy: 0,005mm(tested on a mandrel with a length of 10mm ) Standard: DIN 6499B / 426EP For clamping drills, cutters, countersinks, etc. . Collet size: Diameter: 16mm Length: 28mm Clamping procedure collets: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

Collet chuck series: ER 16 with higher clamping accuracy Size: 2.5 mm Collet chuck diameter: 2.0 - 2, 5mm Clamping accuracy: 0,005mm(tested on a mandrel with a length of 10mm ) Standard: DIN 6499B / 426EP For clamping drills, cutters, countersinks, etc. . Collet size: Diameter: 16mm Length: 28mm Clamping procedure collets: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

Collet chuck series: ER 16 with higher clamping accuracy Size: 3.5 mm Collet chuck diameter: 3.0 - 3, 5mm Clamping accuracy: 0,005mm(tested on a 16mm mandrel) Standard: DIN 6499B / 426EP For clamping drills, milling cutters, countersinks, etc. . Collet size: Diameter: 16mm Length: 28mm Clamping procedure collets: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

Collet chuck series: ER 16 with higher clamping accuracy Size: 4.5 mm Collet chuck diameter: 4.0 - 4, 5mm Clamping accuracy: 0,005mm(tested on a 16mm mandrel) Standard: DIN 6499B / 426EP For clamping drills, milling cutters, countersinks, etc. . Collet size: Diameter: 16mm Length: 28mm Clamping procedure collets: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

Collet chuck series: ER 16 with higher clamping accuracy Size: 5.5 mm Collet chuck diameter: 5.0 - 5, 5mm Clamping accuracy: 0,005mm(tested on a 16mm mandrel) Standard: DIN 6499B / 426EP For clamping drills, milling cutters, countersinks, etc. . Collet size: Diameter: 16mm Length: 28mm Clamping procedure collets: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.