Metalworking tools

Machine spiral tap(high speed) G3 / 8 "R45 PM in helix Size: 3/8" Pitch: 19 walking per inch Thread start: C, 2 courses - see attached photo Material: HSSE-PM(High speed steel 5 wrap, forging) Coating: HL - Balinit HardLube with carbide component(TiAlN WC / C) with a hardness of 2600 HV helix angle: 45 Â ° Standard: DIN5156, DIN ISO228 Grinding profile thread Usage: Universal - for steels, stainless steels, cast iron, non-ferrous metals and heat- resistant steels, can also be used in an emergency on a piece cut It turns into hardened steel. Suitable for machining centers, or for older types of numerical and conventional machines with lower power.

Machine spiral tap for NC / CNC machines (high speed) G 1/8 "in S-NC helix Angle: 28 strokes per inch Tender: DIN 5156 Thread start : E, 1,5 to 2 steps - see enclosed photo Material: HSSE-PM (Cutting steel 5% Cobalt) Cut Thread TiCN - Carbon Nitride Titanu Helical angle: 45 ° Application: 1.3 : Structural and carbon steel, low alloy steel, steel up to 1100N / 1.4 : alloyed steels, tool steel cold drawn to 1000N / mm2 2.1 : ferritic and martensitic stainless steel up to 1000N / mm2 < : Ball and chrome cast iron up to 700N / mm2 3.4 : Cast and rolled cast iron up to 1000N / mm2 1.1: Magnetic and soft structural steel up to 400M / mm2 1.2: Structural and automotive steel up to 500N / mm2 1.5: Hard and hardened steels up to 38 HR C: up to 1200N / mm2 2.2: Austenitic steel up to 850N / mm2 2.3: Refractory corrosion-resistant steel up to 1100N / mm2 4.4: Copper and its alloys up to 400N / mm2 4.5: / mm2 4.7: Aluminum and copper alloy with long chipping up to 800N / mm2 4.8: Aluminum and zinc alloys with long chipping up to 800N / mm2 6.3: Long chipped brass up to 700N / mm2 7.2: Aluminum alloy with silicon content up to 5% up to 700N / mm2 7.3: Aluminum silicon alloy from 5% to 10% up to 400N / mm2 This tap is designed for NC machines - synchronized thread cutting

Machine spiral tap for NC / CNC machines (high speed) G 1/4 "in S-NC helix Angle: 19 strokes per inch Tender: DIN 5156 Thread start : E, 1,5 to 2 steps - see enclosed photo Material: HSSE-PM (Cutting steel 5% Cobalt) Cut Thread TiCN - Carbon Nitride Titanu Helical angle: 45 ° Application: 1.3 : Structural and carbon steel, low alloy steel, steel up to 1100N / 1.4 : alloyed steels, tool steel cold drawn to 1000N / mm2 2.1 : ferritic and martensitic stainless steel up to 1000N / mm2 < : Ball and chrome cast iron up to 700N / mm2 3.4 : Cast and rolled cast iron up to 1000N / mm2 1.1: Magnetic and soft structural steel up to 400M / mm2 1.2: Structural and automotive steel up to 500N / mm2 1.5: Hard and hardened steels up to 38 HR C: up to 1200N / mm2 2.2: Austenitic steel up to 850N / mm2 2.3: Refractory corrosion-resistant steel up to 1100N / mm2 4.4: Copper and its alloys up to 400N / mm2 4.5: / mm2 4.7: Aluminum and copper alloy with long chipping up to 800N / mm2 4.8: Aluminum and zinc alloys with long chipping up to 800N / mm2 6.3: Long chipped brass up to 700N / mm2 7.2: Aluminum alloy with silicon content up to 5% up to 700N / mm2 7.3: Aluminum silicon alloy from 5% to 10% up to 400N / mm2 This tap is designed for NC machines - synchronized thread cutting

Machine spiral tap ( quick-cutting ) M 12 R45 PM in helix 12x1.5 Pitch: 1.5, fine Fit: ISO2 / 6HX - ground thread profile Standard: DIN 374 Thread pitch: E, 1.5-2 turns - see attached photo Material: HSSE-PM ( High-speed steel 5% Cobalt, production by sintering ) Grounded thread profile Coating : HL - Balinit HardLube with carbide component (TiAlN WC / C) with hardness 2600 HV Helix angle : 45° Use : Universal - for steels, stainless steels, cast iron , non-ferrous metals and heat-resistant steels, can be used in emergencies and for piece cutting of threads in hardened steel. Suitable for machining centers, possibly also for older types of numerical and conventional machines with lower performance.

M 16x2,0 Moulder Thread without Lubrication Groove Form: C (2 Beam Sections) Face: ISO 2, 6HX Material: HSSE-PM (5% Cobalt Cobalt Co5 , production by sintering) Coating: TiN DIN 376, DIN 2174, ČSN 223052 Application: 1.1: Soft steel and magnetic steel up to 400N / Home 1.2 mm2: cutting steel, structural steel and carburizing to 500N / mm2 Home 2.2: Austenitic steel Corrosion in 850nm / mm2 6.3 Home brass machinable to 700N / mm2 Home 7.1: 350N to Alu / mm2 7.2: Aluminum alloy containing Si

Diamond abrasive paste in dispenser - in sprayer Paste weight: 5g The color of the paste is only the color of the binder - may vary by manufacturer , the abrasive is colorless. Usage - see attached photo - table. Diamond polishing and lapping pastes consist of diamond powder and a binder, which has a lubricating and at the same time cooling effect. The use of diamond pastes instead of abrasives makes it possible to increase the lapping speed 2 - 5 times and thus improve the cleanliness of the machined surface. We recommend using diamond paste for lapping and polishing sintered carbides, ceramics, quartz and other materials of higher hardness. In the manufacture of gauges, molds, micro-grinding parts, heating apparatus. They are used in the engineering industry for various types of materials for finishing operations of functional surfaces of tools, finishing cuts of molds, molding tools, molds and nozzles, lap Jacks and valve seats, lapping of very precise parts of hydraulic, pneumatic and fuel systems. Polishing of metal parts, but they can also be used to polish stone and semi-precious stones. Diamond pastes are washable with water or organic solvents: * Kerosene, gasoline, low-viscosity mineral oils, alcohol and other solvents can be used as organic solvents. . * Water-washable pastes are recommended for machining non-metallic materials. * Universal pastes are suitable for machining both metallic and non-metallic materials.

Z362V-3 Stainless Steel Threaded Tap: 1.5 - Basic Facing: ISO2 / 6H - Cut Thread DIN 371 (Reinforced Stopper) Material : HSSE (High-Speed ??Steel 5% Cobalt) Finish: HL (Balinit Hardlube) - High Abrasion Coating 40 ° Hex Groove Color: blue strip Application: Stainless Steel with strength up to 1100 N / mm2 - Blind hole M10

Turning insert, replaceable insert for turning DCMT 070202 - HMP, PC9030 Radius 0,2mm Sheet material: PC9030 - universal grade - usable from roughing to finishing. Ideal for machining stainless steel. High resistance to chipping under constant working conditions. Coating: PVD, TiAlN(Titan Aluminum Nitride) Application: Stainless steel: M25-M35 LamaÄ HMP: Medium to finishing breaker geometry for small chips. The wider wall of the breaker prolongs the life of the insert - even with a sudden change in the depth of the cut. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Lathe insert, replaceable turning insert DCMT 070202 - MP , NC3225 Radius 0.2mm Coating : CVD , MT-TiCN Al2O3 TiN < Blade material: NC3225 - universal series suitable for machining automotive castings and bearing steel, for continuous and interrupted cuts. High chipping resistance, high temperature stability thanks to Al2O3 coating. Coating : MT-CVD : TiCN Al2O3 TiCN Usage : Steel : P20-P25 Type MP : Ideal choice for steels that have a hardened surface (, e.g. automotive and machine parts). Suitable for machining cast steel, bearing steel, etc. The breaker is very sharp with very good chip removal - even when machining rough/uneven surfaces. It makes a very good surface. The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket. Cat. no.: 102057566

Turning insert, turning insert for turning DCMT 070204 - HMP, NC3120 Radius 0,4mm Material of blade: NC3120 HMP type: Medium to finishing geometry of the chipper for small chips. The wider wall of the trowel ensures extended plate life - even with sudden change in cutting depth.

Turning insert, replaceable insert for turning DCMT 070204 - HMP, PC9030 Radius 0,4mm Sheet material: PC9030 - universal grade - usable from roughing to finishing. Ideal for machining stainless steel. High resistance to chipping under constant working conditions. Coating: PVD, TiAlN(Titan Aluminum Nitride) Application: Stainless steel: M25-M35 LamaÄ HMP: Medium to finishing breaker geometry for small chips. The wider wall of the breaker prolongs the life of the insert - even with a sudden change in the depth of the cut. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert, replaceable insert for turning DCMT 11T304 - C25, NC3120 Radius 0,4mm Slab material: NC3120 - suitable for common machining to roughing of steel. High resistance to chipping, high temperature stability due to Al2O3 coating. Coating: MT-CVD: TiCN Al2O3 TiCN Application: Steel: P20-P25 LamaÄ C25: Suitable for Intermittent cut, for common machining of cast iron, stainless steel and refractory alloys. Low cutting forces, very good resulting surface. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.