Metalworking tools

Paste cutting, thread cutting, boring and boring operations Special high-performance water-soluble paste Application on tool: - in undiluted state - can be diluted up to a ratio of 1: 4 with water < br> Packing 1000g

Paste cutting, thread cutting, boring and boring operations Special high-performance water-soluble paste Application on tool: - in undiluted state - can be diluted up to a ratio of 1: 4 with water < Packaging: 30l barrel

Paste cutting, thread cutting, boring and boring operations Special high-performance water-soluble paste Application on tool: - in undiluted state - can be diluted up to a ratio of 1: 4 with water < br> Packing 5000g

Insert clamp For RM-5R50 and RM-5R63 cutters

Intermediate flange for universal chisel ITEM for Chinese lathes For chucks: PIECE 100mm Flange diameter: 100mm Material: Steel Lathe spindle mounting: Fitting: 70mm Screw axis: 82,5mm(3x M8) < br> Chuck mounting: Fitting: 72mm Suitable for chuck clamping KUS 100/3 or KUS 100/4 Suitable for Chinese lathes The intermediate flange is screwed directly onto the lathe spindle. Before purchasing this flange, remove the flange from the lathe and change the mounting and the pitch

Intermediate flange for TOS IUS universal glass for Chinese lathes For chucks: TOS IUS 100mm Flange diameter: 100mm Material l: Steel Lathe spindle mounting: Mounting: 70mm Screw axis: 82,5mm(3x M8) Chuck mounting: Fitting: 80mm Suitable for TOS IUS 100/3 or TOS IUS 100/4 chuck mounting Suitable for Chinese lathes The intermediate flange is screwed directly onto the lathe spindle. Before purchasing this flange, remove the flange from the lathe and change the mounting and the pitch

Intermediate flange for universal glass TOS IUS for Chinese lathes For chucks: IUS 100mm Flange diameter: 100mm Material : Steel Lathe spindle mounting: Mounting: 72mm Screw axis: 84mm(3x M8) Chuck mounting: Suitable for TOS IUS 100/3 or TOS IUS 100/4 chuck mounting Suitable for Chinese lathes The intermediate flange is screwed directly onto the lathe spindle. Before purchasing this flange, remove the flange from the lathe and change the mounting and the pitch

Intermediate flange for universal glass TOS IUS for Chinese lathes For chucks: IUS 125mm Flange diameter: 125mm Material: Steel Lathe spindle mounting: Mounting: 72mm | Screw axis: 84mm(3x M8) Chuck mounting: Suitable for TOS IUS 125/3 or TOS IUS 125 / 4 chuck clamps Suitable for Chinese lathes The intermediate flange is screwed directly onto the lathe spindle. Before purchasing this flange, remove the flange from the lathe and change the mounting and the pitch

Intermediate flange for universal glass PIECE 125 for Chinese lathes For chucks: PIECE 125mm Flange diameter: 125mm Material: Steel Lathe spindle mounting: Mounting: 72mm Screw axis: 84mm(3x M8) Chuck mounting: Suitable for chuck clamping KUS 125/3 or KUS 125 / 4 Suitable for Chinese lathes The intermediate flange is screwed directly onto the lathe spindle. Before purchasing this flange, remove the flange from the lathe and change the mounting and the pitch

Facing plate for Chinese lathes series 300 Plate diameter: 128mm Material: Steel Grooves: 3x groove T10 Lathe spindle mounting: Mounting: 55mm Screw pitch: 66mm(3x M6) Suitable for lathes A… 300 series - brands Asist, Proma, Einhell, Sieg, Rotwerk, CQ, MB, JET and many other clones < br> The faceplate is screwed directly onto the lathe spindle. Before purchasing this face plate, remove the flange from the lathe and change the shoulder and the spacing of the holes The versatility of this face plate together It is used mainly in T-grooves T10 passing up to the circuit board, thanks to which it is possible to use this board not only as a variable carrier of hearts, but above all As a tool for clamping parts of irregular shapes, in which it is necessary to make a hole in the chosen place, possibly thread, mounting, tapping, etc. Next is it is possible to clamp a protractor for machining perpendicular holes with a basic workpiece on the plate, last but not least, it is possible to use a face plate and a clamp made of mild steel to turn a thin brush. sheet metal or other materials. Thanks to the face plate it is possible to clamp the universal harvester off the axis of rotation of the spindle for the production of eccentrics. Here it is necessary to keep in mind, as well as when clamping workpieces of irregular shapes, that it is always necessary to choose the lowest speed and then further or the rest. Only according to the behavior of the whole machine.

Intermediate flange for universal jaw TOS IUS for Chinese lathes series 300 For chucks: IUS 80mm Diameter of flange: 80mm Material: Steel Lathe spindle mounting: Mounting: 55mm Screw axis: 66mm(3x M6) Chuck mounting: Suitable for TOS IUS 80/3 or TOS IUS 80/4 chuck mounting Suitable for lathes A… Series 300 - brands Asist, Proma, Einhell, Sieg, Rotwerk, CQ, MB, JET and lots of other clones The intermediate flange is screwed directly onto the lathe spindle. Before purchasing this flange, remove the flange from the lathe and change the mounting

Intermediate flange for universal chisel PIECE for Chinese lathes series 300 For chucks: PIECE 100mm Diameter of flange: 100mm Material: Steel Mounting on lathe spindle: Mounting: 55mm Screw axis: 66mm(3x M6) Chuck mounting: Suitable for chuck clamping KUS 100/3 or KUS 100/4 Suitable for Series lathes 300 - brands Asist, Proma, Einhell, Sieg, Rotwerk, CQ, MB, JET and lots of other clones The intermediate flange is screwed directly onto the lathe spindle. Before purchasing this flange, remove the flange from the lathe and change the mounting