Metalworking tools

Abrasive non-woven abrasive wheel 125mm with Velcro Suitable for matting and satinizing ferrous and non-ferrous metals, oxidized cleaning non-ferrous metals, matting of stainless steels, roughening of plastics, as a preparation for gluing, removing blue discoloration after welding. Diameter: 125mm Grain size: coarse - this wheel is suitable for use after grinding abrasives of grain size P60 - P120 Corundum: A Optimum working speed ky: 3,000 rpm Maximum working speed: 5,500 rpm Open material structure gives the tool elasticity and takes care of the cold cut. The high flexibility of the fleece ensures that there are no changes in the geometry of the surface. Usage: Drill or angle grinder, ideally with speed control For comparison of roughness of fleece - see attached photos.

Abrasive non-woven abrasive wheel 125mm with Velcro Suitable for matting and satinizing ferrous and non-ferrous metals, oxidized cleaning non-ferrous metals, matting of stainless steels, roughening of plastics, as preparation for gluing, removal of blue discoloration after welding. Diameter: 125mm Grain size: fine - this wheel is suitable for use after grinding abrasive grit P180 - P320 Corundum: A Optimal working speed ky: 3,000 rpm Maximum working speed: 5,500 rpm The open structure of the material imparts elasticity to the tools and takes care of the cold cut. The high flexibility of the fleece ensures that there are no changes in the geometry of the surface. Usage: Drill or angle grinder, ideally with speed control For comparison of roughness of fleece - see attached photos.

Abrasive non-woven abrasive wheel 125mm with Velcro Suitable for matting and satinizing ferrous and non-ferrous metals, oxidized cleaning non-ferrous metals, matting of stainless steels, roughening of plastics, as preparation for gluing, removal of blue discoloration after welding. Diameter: 125mm Grain size: medium - this wheel is suitable for use after grinding abrasives with a grain size of P120 - P180 Corundum: A Optimal working speed Height: 3,000 rpm Maximum working speed: 5,500 rpm The open structure of the material gives the tool elasticity and takes care of the cold cut. The high flexibility of the fleece ensures that there are no changes in the geometry of the surface. Usage: Drill or angle grinder, ideally with speed control For comparison of roughness of fleece - see attached photos.

Brunox Turbo-Spray power 500 ml is an essential aid in long-term maintenance, where it lubricates, cleans, loosens screws and prevents corrosion. The lubricant also absorbs water. 5in1: * Lubricant * Corrosion protection * Contact spray * Solvent solvents * Service spray Doesn't dry out like other commercially available WD lubricants. Contains higher and higher quality content of the lubricating component. Highly flammable.

Brunox Turbo-Spray power 500 ml is an essential aid in long-term maintenance, where it lubricates, cleans, loosens screws and prevents corrosion. The lubricant also absorbs water. 5in1: * Lubricant * Corrosion protection * Contact spray * Solvent solvents * Service spray Doesn't dry out like other commercially available WD lubricants. Contains higher and higher quality content of the lubricating component. Highly flammable. Including an extension that is non-removable. In the vertical position of the attachment, it is possible to use the spray in the usual way - for a short time. See photo.

Brunox Turbo-Spray power 100 ml is an essential aid in long-term maintenance, where it lubricates, cleans, loosens screws and prevents corrosion. The lubricant also absorbs water. 5in1: * Lubricant * Corrosion protection * Contact spray * Solvent solvents * Service spray Doesn't dry out like other commercially available WD lubricants. Contains higher and higher quality content of the lubricating component. Highly flammable.

Protective agent for stabilization - corrosion protection with extra long-term effect. Strongly holding, hardening. It dries after 1-2 hours, hardens after 12 hours. Heat resistance up to 80A ‚Â ° C Repels moisture and salt water Use and action: * As protection against corrosion during storage outdoors or sea transport. * For shafts, motors, steel coils, valves, machines, precision tools, semi-finished and finished products, agricultural and construction vehicles, equipment eho kind. * Suitable where chrome plating, galvanizing, etc. are not possible. It is applied on a clean dry surface, if the surface is a bit damp, we recommend use Brunox Turbo Spray beforehand - spray it into all cavities and corners so that the moisture disappears. Any water will drop into drops, then wipe the set with a cloth and apply IX 100. The applied layer should be at least 20um thick. The ideal is a dry layer of 50um, which you will achieve when applying 125um of IX100(even at a consumption of 0.63l / m2). Disposal of preparation IX 100: With varnish or cleaning gasoline or with the help of a high-pressure cleaner and a solution from surfactants.

Pliers nut 16-22mm Do M24

Taps, Thread Cutting Head for Tubing Threads Set contains: 1pcs - Ratchet Head for Threaded Head 6x1pcs - Threaded Head: 1/4 ", 3/8", 1/2 ", 3 / 4 ", 1", 1 1/4 " Extension Handle Supplied in Tempered Plastic Case

Taps, threaded head for tubular threads 1pcs - Ratchet head for threaded head 5x1pcs - Threaded head: 3/8 ", 1/2", 3/4 ", 1 ", 1 1/4" Extension Handle Supplied in a hard plastic case

Spare cutting disc diameter 75mm and thickness 1,8mm Disc for metal cutting Maximum speed 25 000 Hole diameter: 9,7mm Suitable for use with pneumatic angle grinder (saw) .

Abrasive Carrier, Velcro Carrier Wheel Diameter 125mm Wheel Power 14mm Disc is fitted with Velcro fastener for fastening grinding wheels, felt, foam velcro discs, polishing lambs (for dry zip or for strap fastening) The disc has a 9 mm diameter pin that is mounted rigidly. The disc thus carries a higher speed in the drill than the drive wheel with a removable mandrel. Max speed 10,000 rpm