Metalworking tools

Broaching adapter - TORX broach made of sintered cobalt steel Dimension: TORX 20 - T20 Dimension tolerance and image depth - see attached PDF catalog sheet. For broaching heads: BR-G8 Clamp shank: 8mm Material: HSSE-PM - sintered powder high-speed cobalt steel Coating: without coating - we are able to offer TiN / TiAlN / INOX PLUS , ZIRINOS , possibly other coatings Use - see attached video Non-coated version of the adapter: steel, aluminum, copper, brass, cast iron - with max. strength up to 900MPa Coated version of the adapter: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa We recommend broaches made of sintered steel HSSE-PM for serial production and when forming steels with a higher strength than stainless steel. The broaching adapters with the head work on the principle of turning/extruding - see the attached video. Remember that the hole must always be properly pre-drilled and countersunk - lead-in for the broach! If you need a different broach size or tolerance, or if you did not find the required broach in the menu, send us an inquiry. Delivery time for non-stock items (heads and broaching adapters) is 5-7 days, for custom production usually 2 weeks.

Slotting grooving insert for UT holders Insert width: 2mm Edge tolerance: P9(1,994mm) Other dimensions - see enclosed data sheet Material: HSSE -PM( sintered cobalt steel) Coating: TiN The insert can be reground 2-3 times. Holders for this insert can be found in related products.

Slotting grooving insert for UT holders Insert width: 3mm Edge tolerance: P9(2,994mm) Other dimensions - see enclosed data sheet Material: HSSE -PM( sintered cobalt steel) Coating: TiN The insert can be reground 2-3 times. Holders for this insert can be found in related products.

Slotting grooving insert for UT holders Insert width: 5mm Edge tolerance: H7(5,012mm) Other dimensions - see enclosed data sheet Material: HSSE -PM(sintered powder cobalt steel) Coating: TiN The insert can be reground 2-3 times. Holders for this insert can be found in related products.

Slotting grooving insert for UT-holders, with chamfer 0.2mm x45° Insert width: 5mm Edge tolerance: P9(4.988mm) Other dimensions - see enclosed data sheet Material: HSSE-PM( sintered cobalt steel) Coating: TiN Chamfering of the cutting edges helps to prevent the formation of "increments" during slotting / forming at the groove bearing surface. The insert can be re-sharpened 2-3 times. Holders for this insert can be found in related products.

Slotting grooving insert for UT holders Insert width: 8mm Edge tolerance: D10(8,098mm) Other dimensions - see enclosed data sheet Material: HSSE -PM( sintered cobalt steel) Coating: TiN The insert can be reground 2-3 times. Holders for this insert can be found in related products.

Slotting grooving insert for UT-holders, with chamfer 0.2mm x45° Insert width: 8mm Edge tolerance: H7(8,015mm) Other dimensions - see enclosed data sheet Material: HSSE-PM( sintered cobalt steel) Coating: TiN Chamfering of the cutting edges helps to prevent the formation of "increments" during slotting / forming at the groove bearing surface. The insert can be re-sharpened 2-3 times. Holders for this insert can be found in related products.

Slotting grooving insert for UT-holders, with chamfer 0.2mm x45° Insert width: 10mm Edge tolerance: H7(10,015mm) Other dimensions - see enclosed data sheet Material: HSSE-PM(sintered powder cobalt steel) Coating: TiN Chamfering of the cutting edge helps to prevent the formation of "increments" during slotting / forming at the groove bearing surface . The insert can be re-sharpened 2-3 times. Holders for this insert can be found in related products.

Slotting grooving insert for UT-holders, with chamfer 0.2mm x45° Insert width: 16mm Edge tolerance: H7(16,018mm) Other dimensions - see enclosed data sheet Material: HSSE-PM(sintered powder cobalt steel) Coating: TiN Chamfering of the cutting edge helps to prevent the formation of "increments" during slotting / forming at the groove bearing surface . The insert can be re-sharpened 2-3 times. Holders for this insert can be found in related products.

Carbide shaping insert for UT- and UTSZ- holders Insert width: 10mm Edge tolerance: C11(10,170mm) Other dimensions - see enclosed catalog sheet Material: TK / SK / VHM - carbide Coating: PVD, TiCN The insert can be reground 2-3 times. Holders for this insert can be found in related products.

Corner milling head for APKX 1505 interchangeable slices Diameter: 50 mm Clamping diameter: 22 mm Overall height: 40 mm Number of edges: 4 Clamping screws: M4 / T15 Supplied without cutting inserts and keys! PRAMET: APKX 1505 < > - M10 x 25mm Allen screw for milling head attachment Recommended cutting conditions: Cutting depth: 3 ÷ 4 mm Feed rate: 600 mm / min Cutting speed: 140 m / min

IMBUS hexagon key and ball IMBUS 6 (HW 6) Overall length 140mm no. 10968 Bondhus - Made in USA The key is made of Protanium steel, which is up to 20% stronger than ordinary steel. The surface of the ProGuard key. The ball end of the BONDHUS Allen key allows you to work at an angle of up to 25 degrees