Metalworking tools

Rivet 4x8mm with Steel Pendulum and Aluminum Head Head: flat Material: Steel / AL Head Diameter: 4mm Ribbon Diameter: 12mm Head Length: 8mm For pre-drilled holes of 4,1mm diameter Suitable for sheet metal width 1,5-5,0mm

Stainless Steel Rivets 4,0x8mm Head: flat Material: Steel Head Diameter: 1mm Suitable for sheet metal 2,5-4,5mm

Stainless Steel Rivets 4,0x8mm Head: flat Material: Steel Head Diameter: 1mm Suitable for sheet metal 2,5-4,5mm

Polishing Pad Material: Natural Wool Diameter 125mm Clamping With Cord

Professional broaching head for the production of internal polygonal profiles: squares, hexagons, TORX, TORX and other profiles for lathe, milling machine, drill and machining center Scope of use: 6-edge: 1-10mm 4-edge: 1-8mm TORX: T3-T40 TORX PLUS: IP6-IP40 For broaches type: G8(with 8mm shank) Head diameter: 35mm Head length(without driver): 46mm Clamping shank: 20mm, with with a flat surface for a weldon clamp Other dimensions - see the attached catalog sheet This head is without a securing shaft - securing is not necessary for the broaching of small short profiles. Usage (see attached video): Production of square, hexagonal and other profile holes on a lathe, milling machine, drill or machining center For machining materials: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with a maximum strength of up to 1400 MPa The head works on the principle of forming/broaching - see the attached video. For the head, it is necessary to purchase additional broaching adapters (broaches) - see related products or the attached catalog sheet. If you cannot find a suitable broach, we can supply custom-made broaches - according to your requirements. Delivery time for non-stock items (heads and broaching adapters) is 5-7 days, for custom production usually 2 weeks.

Professional broaching head for the production of internal polygonal profiles: squares, hexagons, TORX, TORX and other profiles for lathe, milling machine, drill and machining center Scope of use: 6-edge: 1-8mm 4-edge: 1-6mm TORX: T3-T40 TORX PLUS: IP6-IP40 For broaches type: G8(with 8mm shank) Head diameter: 37mm Head length(without driver): 36mm Clamping shank: 20mm (cylindrical ) Other dimensions - see the attached catalog sheet This head is without a locking shaft - locking is not necessary for broaching small short profiles. Usage (see attached video): Production of square, hexagonal and other profile holes on a lathe, milling machine, drill or machining center For machining materials: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with a maximum strength of up to 1400 MPa The head works on the principle of forming/broaching - see the attached video. For the head, it is necessary to purchase additional broaching adapters (broaches) - see related products or the attached catalog sheet. If you cannot find a suitable broach, we can supply custom-made broaches - according to your requirements. Delivery time for non-stock items (heads and broaching adapters) is 5-7 days, for custom production usually 2 weeks.

Professional broaching head for the production of internal polygonal profiles: squares, hexagons, TORX, TORX and other profiles for lathe, milling machine, drill and machining center Scope of use: 6-edge: 1-15mm 4-edge: 1-12mm TORX: T3-T60 TORX PLUS: IP6-IP60 For broaches type: G12 ( with 12mm shank) Head diameter: 58mm Head length (without driver): 77mm Clamping shank: 25mm Other dimensions - see attached catalog sheet Usage (see attached video): Production of square, hexagonal and other profile holes on a lathe, milling machine, drill or machining center For machining materials: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with a max. strength of up to 1400MPa The head works on the principle of forming/broaching - see the attached video. For the head, it is necessary to purchase additional broaching adapters (broaches) - see related products or the attached catalog sheet. If you cannot find a suitable broach, we can supply custom-made broaches - according to your requirements. Delivery time for non-stock items (heads and broaching adapters) is 5-7 days, for custom production usually 2 weeks.

Professional broaching head for the production of internal polygonal profiles: squares, hexagons, TORX, TORX and other profiles for lathe, milling machine, drill and machining center Scope of use: 6-edge: 1-15mm 4-edge: 1-12mm TORX: T3-T60 TORX PLUS: IP6-IP60 For broaches type: G12 ( with 12mm shank) Head diameter: 58mm Head length (without driver): 77mm Clamping shank: 32mm Other dimensions - see attached catalog sheet Usage (see attached video): Production of square, hexagonal and other profile holes on a lathe, milling machine, drill or machining center For machining materials: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with a max. strength of up to 1400MPa The head works on the principle of forming/broaching - see the attached video. For the head, it is necessary to purchase additional broaching adapters (broaches) - see related products or the attached catalog sheet. If you cannot find a suitable broach, we can supply custom-made broaches - according to your requirements. Delivery time for non-stock items (heads and broaching adapters) is 5-7 days, for custom production usually 2 weeks.

Professional turning head for the production of internal polygonal profiles: squares, hexagons, TORX, TORX and other profiles for lathe, milling machine, drill and machining center, with internal cooling Scope of use: 6-edge: 2-26mm 4-edge: 5-20mm TORX: T20-T70 TORX PLUS: IP20-IP70 For punches type: G16(with 16mm shank) Head diameter: 68mm Head length(without driver): 90mm Clamping shank : 25mm Other dimensions - see attached catalog sheet Usage (see attached video) : Production of square, hexagonal and other profile holes on a lathe, milling machine, drill or a machining center For machining materials: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with a maximum strength of up to 1400MPa The head works on the principle of turning/punching - see the attached video. For the head, it is necessary to purchase additional imaging attachments ( punches) - see related products or the attached catalog sheet. If you cannot find a suitable punch, we can supply custom-made punches - according to your requirements. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.

Professional turning head for the production of internal polygonal profiles: squares, hexagons, TORX, TORX and other profiles for lathe, milling machine, drill and machining center, with internal cooling Scope of use: 6-edge: 2-26mm 4-edge: 5-20mm TORX: T20-T70 TORX PLUS: IP20-IP70 For punches type: G16(with 16mm shank) Head diameter: 68mm Head length(without driver): 90mm Clamping shank : 32mm Other dimensions - see attached catalog sheet Usage (see attached video) : Production of square, hexagonal and other profile holes on a lathe, milling machine, drill or a machining center For machining materials: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with a maximum strength of up to 1400MPa The head works on the principle of turning/punching - see the attached video. For the head, it is necessary to purchase additional imaging attachments ( punches) - see related products or the attached catalog sheet. If you cannot find a suitable punch, we can supply custom-made punches - according to your requirements. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.

Professional turning head for the production of internal polygonal profiles: squares, hexagons, TORX, TORX and other profiles for lathe, milling machine, drill and machining center, with internal cooling Scope of use: 6-edge: 2-26mm 4-edge: 5-20mm TORX: T20-T70 TORX PLUS: IP20-IP70 For punches type: G16(with 16mm shank) Head diameter: 68mm Head length(without driver): 90mm Clamping shank : 40mm Other dimensions - see attached catalog sheet Usage (see attached video) : Production of square, hexagonal and other profile holes on a lathe, milling machine, drill or a machining center For machining materials: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with a maximum strength of up to 1400MPa The head works on the principle of turning/punching - see the attached video. For the head, it is necessary to purchase additional imaging attachments ( punches) - see related products or the attached catalog sheet. If you cannot find a suitable punch, we can supply custom-made punches - according to your requirements. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.

Broaching adapter - hexagonal broach made of sintered cobalt steel Dimension: HEX 4 - hexagon 4mm Dimension tolerance and image depth - see attached PDF catalog sheet. For broaching heads: BR-G5 Clamp shank: 5mm Material: HSSE-PM - sintered powder high-speed cobalt steel Coating: without coating - we are able to offer TiN / TiAlN / INOX PLUS , ZIRINOS , possibly other coatings Use - see attached video Non-coated version of the adapter: steel, aluminum, copper, brass, cast iron - with max. strength up to 900MPa Coated version of the adapter: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa We recommend broaches made of sintered steel HSSE-PM for serial production and when forming steels with a higher strength than stainless steel. The broaching adapters with the head work on the principle of turning/extruding - see the attached video. Remember that the hole must always be properly pre-drilled and countersunk - lead-in for the broach! If you need a different broach size or tolerance, or if you did not find the required broach in the menu, send us an inquiry. Delivery time for non-stock items (heads and broaching adapters) is 5-7 days, for custom production usually 2 weeks.