Metalworking tools

Carbide ( TK ) cutter for milling grooves Number of cutting edges: 2 pcs. Diameter of working part: 3mm Length of working part: 9.0mm Total length: 75mm Screw: 55° Clamp shank: 4mm Carbide: nano fine-grained carbide Coating: without coating Tolerance of cutting edge diameter: -0.015mm for cutters up to a diameter of 5mm (including) -0.020mm for cutters from a diameter of 6mm (including) Usage: Progressive milling of grooves, drilling holes Suitable for milling steel and soft adhesive steels - aluminum, copper, brass, etc. Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) cutter for milling grooves Number of cutting edges: 2 pcs. Diameter of the working part: 6mm Length of the working part: 18.0mm Total length: 100mm Screw: 55° Clamping shank: 6mm Carbide: nano fine-grained carbide Coating: without coating Tolerance of cutting edge diameter: -0.015mm for cutters up to a diameter of 5mm (including) -0.020mm for cutters from a diameter of 6mm (including) Usage: Progressive milling of grooves, drilling holes Suitable for milling steel and soft adhesive steels - aluminum, copper, brass, etc. Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) cutter for milling grooves Number of cutting edges: 2 pcs. Diameter of the working part: 12mm Length of the working part: 36.0mm Total length: 100mm Screw: 55° Clamping shank: 12mm Carbide: nano fine-grained carbide Coating: without coating Tolerance of cutting edge diameter: -0.015mm for cutters up to a diameter of 5mm (including) -0.020mm for cutters from a diameter of 6mm (including) Usage: Progressive milling of grooves, drilling holes Suitable for milling steel and soft adhesive steels - aluminum, copper, brass, etc. Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Castrol Alusol ABF 10 is a water-soluble semi-synthetic metalworking fluid. weight / volume ratio: 1 kg = 1ltr specially designed for aluminum alloys (***) optionally also of low, medium to high-alloy stainless steel (**), non-ferrous metals (**) and cast iron (*). Home Suitable for machining - soutružení, milling, grinding, drilling, tapping Packing Quantity: 0.5 liters (plastic container with cap) does not contain ingredients that release formaldehyde. and is therefore in compliance with health and safety regulations. Does not contain boron, which means it complies with environmental protection requirements. No level of nitrite and chlorine, which means it meets the requirements of local legislation on waste treatment and environmental protection requirements. Resistant to fungi and bacteria, which extends the life of the liquid and reduces maintenance costs. Resistant against fungal attack, undermines fluid life and reduces downtime and maintenance. Minimum foaming at recommended water hardness. Excellent wetting and cleaning properties enable working fluid to be stored. Good corrosion properties provide a high level of corrosion protection from machines, tools and products. Covering a wide range of machining, which helps reduce costs. Suitable for soft and hard water 3 - 22 dH ° It can be diluted by pouring into water with constant stirring. Dilution ratio is 4-10% (diluted to 5l to 12.5l mix) depending on the type of operation and material. Application: Aluminum Alloy *** Low Alloy and Medium Alloy Steel ** High Alloy Stainless Steel ** Non-ferrous Metal ** < br> Grinding (4-5% concentration) *** Milling, turni

Castrol Alusol ABF 10 is a water-soluble semi-synthetic metalworking fluid. weight / volume ratio: 1 kg = 1ltr specially designed for aluminum alloys (***) optionally also of low, medium to high-alloy stainless steel (**), non-ferrous metals (**) and cast iron (*). Milling, Grinding, Drilling, Thread Cutting Packing Quantity: 1 Liter (Plastic Container with Cap) in accordance with health and safety regulations. Does not contain boron, which means it complies with environmental protection requirements. No level of nitrite and chlorine, which means it meets the requirements of local legislation on waste treatment and environmental protection requirements. Resistant to fungi and bacteria, which extends the life of the liquid and reduces maintenance costs. Resistant against fungal attack, undermines fluid life and reduces downtime and maintenance. Minimum foaming at recommended water hardness. Excellent wetting and cleaning properties enable working fluid to be stored. Good corrosion properties provide a high level of corrosion protection from machines, tools and products. Covering a wide range of machining, which helps reduce costs. Suitable for soft and hard water 3 - 22 dH ° It can be diluted by pouring into water with constant stirring. The dilution ratio is 4-10% (diluted to 10l to 25l of mixture) depending on the type of operation and material. Application: Aluminum alloy *** Low alloy and medium alloy steel ** High alloy stainless steel ** Non-ferrous metals ** < br> Grinding (4-5% concentration) *** Milling, turning (5-7% concentration) *** Drilling (5-7% ) ***

Castrol Alusol ABF 10 is a water-soluble semi-synthetic metalworking fluid. weight / volume ratio: 1 kg = 1ltr specially designed for aluminum alloys (***) optionally also of low, medium to high-alloy stainless steel (**), non-ferrous metals (**) and cast iron (*). Suitable for Machining - Concentration, Milling, Grinding, Drilling, Thread Cutting Pack quantity: 5 liters (Plastic Container with Cap) Does not contain formaldehyde-releasing additives in accordance with health and safety regulations. Does not contain boron, which means it complies with environmental protection requirements. No level of nitrite and chlorine, which means it meets the requirements of local legislation on waste treatment and environmental protection requirements. Resistant to fungi and bacteria, which extends the life of the liquid and reduces maintenance costs. Resistant against fungal attack, undermines fluid life and reduces downtime and maintenance. Minimum foaming at recommended water hardness. Excellent wetting and cleaning properties enable working fluid to be stored. Good corrosion properties provide a high level of corrosion protection from machines, tools and products. Covering a wide range of machining, which helps reduce costs. Suitable for soft and hard water 3 - 22 dH ° It can be diluted by pouring into water with constant stirring. The dilution ratio is 4-10% (diluted to 50l to 125l of mixture) depending on the type of operation and material. Application: Aluminum alloy *** Low alloy and medium alloy steel ** High alloy stainless steel ** Non-ferrous metals ** < br> Grinding (4-5% concentration) ***

Castrol Alusol ABF 10 is a water-soluble semi-synthetic metalworking fluid. weight / volume ratio: 1 kg = 1ltr specially designed for aluminum alloys (***) optionally also of low, medium to high-alloy stainless steel (**), non-ferrous metals (**) and cast iron (*). Milling, Grinding, Drilling, Thread Cutting - in accordance with health and safety regulations. Does not contain boron, which means it complies with environmental protection requirements. No level of nitrite and chlorine, which means it meets the requirements of local legislation on waste treatment and environmental protection requirements. Resistant to fungi and bacteria, which extends the life of the liquid and reduces maintenance costs. Resistant against fungal attack, undermines fluid life and reduces downtime and maintenance. Minimum foaming at recommended water hardness. Excellent wetting and cleaning properties enable working fluid to be stored. Good corrosion properties provide a high level of corrosion protection from machines, tools and products. Covering a wide range of machining, which helps reduce costs. Suitable for soft and hard water 3 - 22 dH ° It can be diluted by pouring into water with constant stirring. The dilution ratio is 4-10% (diluted to 100l to 250l of mixture) depending on the type of operation and material. Application: Aluminum alloy *** Low alloy and medium alloy steel ** High alloy stainless steel ** Non-ferrous metals ** < br> Grinding (4-5% concentration) *** Milling, turning (5-7% concentration) *** Drilling (5-7% ) *** Reaming (6-9% concentration) *** Sinking (conc

Castrol Alusol SL 51 XBB is a water-soluble semi-synthetic metalworking fluid. Weight / volume ratio: 1kg = 1LTR Specially designed for machining of aluminum alloys (**) or low, medium (**) alloy stainless steel (*), non-ferrous metals (*) and cast iron (*). Suitable for Machining - Concentration, Milling, Grinding, Drilling, Thread Cutting Package quantity: 0.5 liter (plastic container with cap) No additives available release formaldehyde and is therefore in compliance with health and safety regulations. Does not contain boron, which means it complies with environmental protection requirements. No level of nitrite and chlorine, which means it meets the requirements of local legislation on waste treatment and environmental protection requirements. Resistant to fungi and bacteria, which extends the life of the liquid and reduces maintenance costs. Resistant against fungal attack, undermines fluid life and reduces downtime and maintenance. Minimum foaming at recommended water hardness. Excellent wetting and cleaning properties enable working fluid to be stored. Good corrosion properties provide a high level of corrosion protection from machines, tools and products. Covering a wide range of machining, which helps reduce costs. Suitable for both soft and hard water 100-1500 ppm CaCO3 Can be diluted by pouring into water while stirring. Dilution ratio is 6-10% (diluted to 8.5l to 12.5l mix) depending on the type of operation and material. Application: Aluminum Alloy ** Low Alloy and Medium Alloy Steel ** High Alloy Stainless Steel * Non-ferrous Metals * Cast Iron Grinding (6-7% concentration) *

Castrol Alusol SL 51 XBB is a water-soluble semi-synthetic metalworking fluid. Weight / volume ratio: 1kg = 1LTR Specially designed for machining of aluminum alloys (**) or low, medium (**) alloy stainless steel (*), non-ferrous metals (*) and cast iron (*). Milling, Grinding, Drilling, Thread Cutting Contains formaldehyde-free additives , and is therefore in compliance with health and safety regulations. Does not contain boron, which means it complies with environmental protection requirements. No level of nitrite and chlorine, which means it meets the requirements of local legislation on waste treatment and environmental protection requirements. Resistant to fungi and bacteria, which extends the life of the liquid and reduces maintenance costs. Resistant against fungal attack, undermines fluid life and reduces downtime and maintenance. Minimum foaming at recommended water hardness. Excellent wetting and cleaning properties enable working fluid to be stored. Good corrosion properties provide a high level of corrosion protection from machines, tools and products. Covering a wide range of machining, which helps reduce costs. Suitable for both soft and hard water 100-1500 ppm CaCO3 Can be diluted by pouring into water while stirring. The dilution ratio is 6-10% (diluted to 16.7l to 25l mix) depending on the type of operation and material. Application: Aluminum Alloy ** Low Alloy and Medium Alloy Steel ** High Alloy Stainless Steel * Non-ferrous Metals * Cast Iron Grinding (6-7% concentration) * Milling, turning (6-8% concentration) ** Drilling (7-9% concentration) **

Castrol Alusol SL 51 XBB is a water-soluble semi-synthetic metalworking fluid. Weight / volume ratio: 1kg = 1LTR Specially designed for machining of aluminum alloys (**) or low, medium (**) alloy stainless steel (*), non-ferrous metals (*) and cast iron (*). Home Suitable for machining - soutružení, milling, grinding, drilling, tapping Units: 5 liters (plastic container with cap) does not contain ingredients that release formaldehyde , and is therefore in compliance with health and safety regulations. Does not contain boron, which means it complies with environmental protection requirements. No level of nitrite and chlorine, which means it meets the requirements of local legislation on waste treatment and environmental protection requirements. Resistant to fungi and bacteria, which extends the life of the liquid and reduces maintenance costs. Resistant against fungal attack, undermines fluid life and reduces downtime and maintenance. Minimum foaming at recommended water hardness. Excellent wetting and cleaning properties enable working fluid to be stored. Good corrosion properties provide a high level of corrosion protection from machines, tools and products. Covering a wide range of machining, which helps reduce costs. Suitable for both soft and hard water 100-1500 ppm CaCO3 Can be diluted by pouring into water while stirring. Dilution ratio is 6-10% (diluted to 83.5l to 100l of mixture) depending on the type of operation and material. Application: Aluminum Alloy ** Low Alloy and Medium Alloy Steel ** High Alloy Stainless Steel * Non-ferrous Metals * Cast Iron Grinding (6-7% concentration) * Milling

Castrol Alusol SL 51 XBB is a water-soluble semi-synthetic metalworking fluid. Weight / volume ratio: 1kg = 1LTR Specially designed for machining of aluminum alloys (**) or low, medium (**) alloy stainless steel (*), non-ferrous metals (*) and cast iron (*). Milling, Grinding, Drilling, Thread Cutting - , and is therefore in compliance with health and safety regulations. Does not contain boron, which means it complies with environmental protection requirements. No level of nitrite and chlorine, which means it meets the requirements of local legislation on waste treatment and environmental protection requirements. Resistant to fungi and bacteria, which extends the life of the liquid and reduces maintenance costs. Resistant against fungal attack, undermines fluid life and reduces downtime and maintenance. Minimum foaming at recommended water hardness. Excellent wetting and cleaning properties enable working fluid to be stored. Good corrosion properties provide a high level of corrosion protection from machines, tools and products. Covering a wide range of machining, which helps reduce costs. Suitable for both soft and hard water 100-1500 ppm CaCO3 Can be diluted by pouring into water while stirring. The dilution ratio is 6-10% (diluted to 167l to 200l of mixture) depending on the type of operation and material. Application: Aluminum Alloy ** Low Alloy and Medium Alloy Steel ** High Alloy Stainless Steel * Non-ferrous Metals * Cast Iron Grinding (6-7% concentration) * Milling, turning (6-8% concentration) ** Drilling (7-9% concentration) ** Reaming (8-10% concentration

Castrol Alusol SL 51 XBB is a water-dilutable semi-synthetic metalworking fluid. Ratio weight / volume: approx. 1:1 Specially designed for machining aluminum alloys(--), possibly also for low, medium (- -) ??to highly alloyed stainless steel(-), non-ferrous metals(-) and cast iron(-). Suitable for machining - turning, milling, grinding, drilling, threading Quantity in package: 208l drum Does not contain additives that release formaldehyde and is therefore compliant with health and safety regulations. Does not contain boron, which means that it complies with environmental protection requirements. Without nitrite and chlorine levels, which means it meets the requirements of local waste treatment legislation and environmental protection requirements. Resistant to mold and bacteria, extending the life of the fluid and reducing maintenance costs. Resistant to fungal attack, extends fluid life and reduces downtime and maintenance requirements. Minimum foaming in recommended water hardness. Excellent wetting and cleaning properties allow the storage of the working fluid. Good anti-corrosion properties provide a high level of protection against corrosion from machinery, tools and products. It covers a wide range of machining, which helps to reduce costs. Suitable for soft and hard water 100-1500 ppm CaCO3 Can be diluted by pouring into water with constant stirring. The dilution ratio is 6-10% ( diluted to 16.7l to 25l of mixture ) depending on the type of operation and material. Usage: Aluminum alloys -- Low and medium alloy steel -- High alloy stainless steel - Non-ferrous metals - Cast iron - Grindin