Metalworking tools

Diameter of hole made: 4.5mm Max. Wall thickness: 2,0mm Clamping shank: 6mm Recommended speed: 2200 - 3700 rpm Length of drilling section: 9,1mm Catalog number: 0147005 Formwork boreholes around the bore are molded from the extruded material by a hem Economical alternative to welded and riveted nuts and other bonding techniques Can be used for: screw joints, soldered and welded joints, bearings, fittings, self-tapping screws, > Usage: Suitable for metallic materials - structural and stainless steel, brass, aluminum, copper and special alloys

Diameter of hole formed: 5,4mm Max. Wall thickness: 2,0mm Clamping shank: 8mm Recommended speed: 2000 - 3600 rpm Length of drilling section: 10,1mm Catalog number: 0147006 Formwork boreholes around the bore are molded from the extruded material by a hem Economical alternative to welded and riveted nuts and other bonding techniques Can be used for: screw joints, soldered and welded joints, bearings, fittings, self-tapping screws, > Usage: Suitable for metallic materials - structural and stainless steel, brass, aluminum, copper and special alloys

Diameter of hole formed: 7,3 - 7,4mm Max. Wall thickness: 2.5mm Clamping shank: 8mm Recommended speed: 1600 - 3200 rpm Length of drilling section: 13.5mm Catalog number: 0147008 Formwork boreholes around the bore are molded from the embossed material by a hem Economical alternative to welded and riveted nuts and other bonding techniques Can be used for: screw joints, soldered and welded joints, bearings, fittings, self-tapping screws, > Usage: Suitable for metallic materials - structural and stainless steel, brass, aluminum, copper and special alloys

Diameter of hole formed: 9,2 - 9,3mm Max. wall thickness: 2.5 mm Home Shank: 10mm Home Recommended speed: 1500 to 3000 rev / min Length Home drilling portion: 16.2 mm Catalog number: 0147010 Home Drills FORM around the hole formed into the extruded material hem Home Energy saving alternative to with welded and riveted nuts and other connecting techniques can be used for Home: screw connections, soldered and welded joints, bearings, fittings, self-tapping screws, expansion pipe Usage: Suitable for metallic materials - structural and stainless steel, brass, aluminum, copper and special alloys

Unused - symmetrical double-sided angled end mill with underturned teeth Angle: 30° Diameter of the cutter: 160mm Diameter of the clamping hole: 32mm Width: 25mm Number of teeth: 22 Radius at the top: R2.5 Material: HSS - High-speed steel ČSN 222252.1 / 22 2252.1 Resale - over-standard stocks

White paste based on mineral oil, without harmful and irritating effects, see the attached technical sheet. Pasta is not diluted with water. Density: 1.7 g / cm3 at 20 ° C

Material: Brass Overall length: 145mm

Yellow-Brown Cutting Fluid - See the attached Technical Data Sheet for more details. Oil is not diluted with water. Density: 0.945 g / cm3 at 20 ° C

Yellow-Brown Cutting Fluid - See the attached Technical Data Sheet for more details. Oil is not diluted with water. Density: 0.945 g / cm3 at 20 ° C

Material: Nylon Overall length: 145mm

Force screw in the knife holder. Thread Size: M2 Head: TORX 6 Overall length of bolt (with head): 5mm

Hand tap Size: BA no.2(diameter 4.70mm) Pitch: 0.81 mm Top angle of thread: 47.5 A ‚Â °, rounded top and bottom of thread Thread BA - British Association - modeling thread Facial medium: Material: HSS - High speed steel Standard: BA93, ISO529 For cutting into steel with max. strength 900N / mm2 This thread is used for example. for metal / plastic arrowheads