Metalworking tools

Carbide drill bit TK / HA / PVD Diameter : 8.5mm Clamping diameter (h6) : 10.0mm Length : 5D Helix length : 56mm Total length: 101mm Helix angle: 30 - 35° Tip angle: 140° Four-surface grinding Coating: TiAlN (Titanium Aluminum Nitride) Carbide: fine-grained K40UF Standard: DIN6539 Use: Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC

Carbide drill bit TK / HA / PVD Diameter : 9.5mm Clamping diameter (h6) : 10.0mm Length : 5D Helix length : 56mm Total length: 101mm Helix angle: 30 - 35° Tip angle: 140° Four-surface grinding Coating: TiAlN (Titanium Aluminum Nitride) Carbide: fine-grained K40UF Standard: DIN6539 Use: Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC

The disc comes from over-standard stock, may have scratches due to storage, functional at 95-99% - no effect on correct functionality Sanding disc shape T4 for stand / machine sander Diameter: 200/180mm Disc strength: 20mm Clamping hole: 32mm Grit: 60 Speed: 4770 rpm. Corundum : 99BA (white corundum) Hardness : L (medium) Structure : 9 (very open) Binder : V (ceramic) Recommended use: steel class 11 Possible use: steel up to 55 HRC, cast iron

TK / HA / PVD hard metal drill bit Diameter: 2,5mm Clamping diameter (h6): 3,0mm Length: 5D Hex lenght: 15, 0mm Overall length: 38mm Helix angle: 30 - 35 ° Angle of the tip: 130 ° Quad flat sheet TiAlN (Titan Aluminum Nitride) > Carbide: Fine K20 / K30 Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels to 65 HRC

TK / HA / PVD hard metal drill bit Diameter: 3,0mm Clamping diameter (h6): 3,0mm Length: 5D Hex lenght: 15, 0mm Overall length: 38mm Helix angle: 30 - 35 ° Angle of the tip: 130 ° Quad flat sheet TiAlN (Titan Aluminum Nitride) > Carbide: Fine K20 / K30 Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels to 65 HRC

Abrasive cup wheel for stand / machine sander Diameter: 100mm Wheel strength: 50mm Hole: 20mm Abrasive height (in recess): 7.5mm Disc width at clamping point: 10mm Grit: 60 Type of abrasive: 99BA - artificial corundum white, ceramic binder Hardness: K Structure: 9 Speed: 32 m/s - You can find the method of marking the discs in the attached table. Recommended use: steel class 11 Use possible: steel up to 55 HRC, stainless steel, cast iron Cat. no.: 429032

Powerful cutting oil for normal structural steels and non-ferrous metals. dilutable: = 5% oil for normal structural steel and non-ferrous metals Home oil = 10% for higher strength steel and stainless steel Home for heavy duty machining oil can be added to mix up to 50% water

Powerful cutting oil for normal structural steels and non-ferrous metals, 2.5 liter packaging Prevents corrosion Does not contain any heavy metals Free of nitrate and chlorine Also suitable for applications with minimal lubrication. Dilutable with water: 5% oil = for common structural steels and non-ferrous metals 10% oil = for steels with higher strength and noble © steels With increasing demands on machinability, increase the dilution ratio - possibly only after use without dilution with water. * Always pour oil into water, never the other way around! Usage: cutting, milling, grinding, drilling and cutting threads

Powerful cutting oil in spray for machining all steels and non-ferrous metals. No compressed gas with a hand pump.

Foam spray for cutting threads, highly effective for various types of machining of steels and non-ferrous metals. Volume: 400ml It adheres very well to the instrument, it does not drip and do not spray. It is suitable for working in demanding conditions, for example. overhead and in situations where dripping / spraying is a problem. Also suitable for working with machines that are not equipped with a cooling system. Advantages: excellent adhesion, does not drip or spray around like a regular liquid Increases the durability of the tool Increases the quality machined surface Sulfur or oil free Usage: Excellent for cutting, milling, drilling and cutting threads common steels and non-ferrous metals. How to use: Direct use on a workpiece or tool.

Universal use. Suitable for steel, stainless steel, poorly machinable materials, non-ferrous metals such as aluminum, copper, brass. The wax holds well on the tool, does not drip or spray like ordinary cutting oils Ideal for working in difficult positions (above the head, etc.) Chlorine free Usage: cutting, drilling, threading and grinding of all common steels. Also suitable for machining hard-to-machine materials such as titanium, manganese steel, cast steel, chrome-nickel or molybdenum steel, non-ferrous steels such as aluminum, copper and brass.

Univerzální použití. Vhodná pro ocel, nerez , špatně obrobitelné material, neželezné kovy jako je hliník, měď, mosaz. Vosk dobře drží na nástroji , neodkapává ani se nerozprašuje jako běžné řezné oleje Ideální pro práci v obtížných polohách (nad hlavou apod.) Bez obsahu chloru Použití : řezání, vrtání, řezání závitů a broušení všech běžných ocelí. Vhodný také při obrábění špatně obrobitelných materiálů jako je titan, manganová ocel, litá ocel, chrom-niklová nebo molybdenová ocel, neželezné oceli jako hliník, měď a mosaz.