Metalworking tools

Carbide drill bit TK / HA / PVD Diameter : 6.0mm Clamping diameter (h6) : 6.0mm Length : 5D Helix length : 36mm Total length: 78mm Helix angle: 30 - 35° Tip angle: 140° Four-surface grinding Coating: TiAlN (Titan Aluminum Nitride) Carbide: fine-grained K40UF Standard: DIN6539 Use: Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC

Carbide drill bit TK / HA / PVD Diameter : 6.8mm Clamping diameter (h6) : 8.0mm Length : 5D Helix length : 48mm Total length: 91mm Helix angle: 30 - 35° Tip angle: 140° Four-surface grinding Coating: TiAlN (Titan Aluminum Nitride) Carbide: fine-grained K40UF Standard: DIN6539 Use: Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC

Carbide drill bit TK / HA / PVD Diameter : 7.0mm Clamping diameter (h6) : 8.0mm Length : 5D Helix length : 48mm Total length: 91mm Helix angle: 30 - 35° Tip angle: 140° Four-surface grinding Coating: TiAlN (Titan Aluminum Nitride) Carbide: fine-grained K40UF Standard: DIN6539 Use: Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC

Carbide drill bit TK / HA / PVD Diameter : 8.0mm Clamping diameter (h6) : 8.0mm Length : 5D Helix length : 48mm Total length: 91mm Helix angle: 30 - 35° Tip angle: 140° Four-surface grinding Coating: TiAlN (Titan Aluminum Nitride) Carbide: fine-grained K40UF Standard: DIN6539 Use: Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC

Carbide drill bit TK / HA / PVD Diameter : 8.5mm Clamping diameter (h6) : 10.0mm Length : 5D Helix length : 56mm Total length: 101mm Helix angle: 30 - 35° Tip angle: 140° Four-surface grinding Coating: TiAlN (Titanium Aluminum Nitride) Carbide: fine-grained K40UF Standard: DIN6539 Use: Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC

Carbide drill bit TK / HA / PVD Diameter : 9.5mm Clamping diameter (h6) : 10.0mm Length : 5D Helix length : 56mm Total length: 101mm Helix angle: 30 - 35° Tip angle: 140° Four-surface grinding Coating: TiAlN (Titanium Aluminum Nitride) Carbide: fine-grained K40UF Standard: DIN6539 Use: Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC

The disc comes from over-standard stock, may have scratches due to storage, functional at 95-99% - no effect on correct functionality Sanding disc shape T4 for stand / machine sander Diameter: 200/180mm Disc strength: 20mm Clamping hole: 32mm Grit: 60 Speed: 4770 rpm. Corundum : 99BA (white corundum) Hardness : L (medium) Structure : 9 (very open) Binder : V (ceramic) Recommended use: steel class 11 Possible use: steel up to 55 HRC, cast iron

TK / HA / PVD hard metal drill bit Diameter: 2,5mm Clamping diameter (h6): 3,0mm Length: 5D Hex lenght: 15, 0mm Overall length: 38mm Helix angle: 30 - 35 ° Angle of the tip: 130 ° Quad flat sheet TiAlN (Titan Aluminum Nitride) > Carbide: Fine K20 / K30 Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels to 65 HRC

TK / HA / PVD hard metal drill bit Diameter: 3,0mm Clamping diameter (h6): 3,0mm Length: 5D Hex lenght: 15, 0mm Overall length: 38mm Helix angle: 30 - 35 ° Angle of the tip: 130 ° Quad flat sheet TiAlN (Titan Aluminum Nitride) > Carbide: Fine K20 / K30 Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels to 65 HRC

Abrasive cup wheel for stand / machine sander Diameter: 100mm Wheel strength: 50mm Hole: 20mm Abrasive height (in recess): 7.5mm Disc width at clamping point: 10mm Grit: 60 Type of abrasive: 99BA - artificial corundum white, ceramic binder Hardness: K Structure: 9 Speed: 32 m/s - You can find the method of marking the discs in the attached table. Recommended use: steel class 11 Use possible: steel up to 55 HRC, stainless steel, cast iron Cat. no.: 429032

Powerful cutting oil for normal structural steels and non-ferrous metals. dilutable: = 5% oil for normal structural steel and non-ferrous metals Home oil = 10% for higher strength steel and stainless steel Home for heavy duty machining oil can be added to mix up to 50% water

Powerful cutting oil for normal structural steels and non-ferrous metals, 2.5 liter packaging Prevents corrosion Does not contain any heavy metals Free of nitrate and chlorine Also suitable for applications with minimal lubrication. Dilutable with water: 5% oil = for common structural steels and non-ferrous metals 10% oil = for steels with higher strength and noble © steels With increasing demands on machinability, increase the dilution ratio - possibly only after use without dilution with water. * Always pour oil into water, never the other way around! Usage: cutting, milling, grinding, drilling and cutting threads