Metalworking tools

Reducing insert for thread cutter with collets TC-1433, after using which it is possible to clamp smaller collets TC-820 - see related products.

DIN 371 (reinforced shank) : M5 and also M6 DIN 376 (classic shank): M8 Thread clamping method: Taps they are secured behind the square and the shank. The screwdriver holds firmly in the extension, pulling the clamping collar in the front of the extension. Function: The tap is clamped into a suitable TC312 collet that has a pre-set torque clutch or can be fine-tuned as needed. This insert is threaded - see related products. Can not be used alone.

DIN 371 (Standard Shank) M10 DIN 371 ( reinforced stopwatch): --- Length compensation - see enclosed photo Tape clamping method: The taps are secured in the extension behind a square and a clamping shank. The screwdriver holds firmly in the extension, pulling the clamping collar in the front of the extension. Function: The tap is clamped into a suitable TC312 collet that has a pre-set torque clutch or can be fine-tuned as needed. This insert is threaded - see related products. Can not be used alone.

Drill stand - drill bit and cutter blades For drill bits 1,0 - 13,0mm, total per 100 drill bit Blade is made of harder plastic. Holder Diameter: 174mm, Height 90mm Holes: 1.0 - 10.0mm x 0.1mm 10.5; 10.9; 11.0; 11.5; 11.9; 12.0; 12.5; 12.9; 13.0

Workshop socket tool box with anti-slip pedestal for placing the grinder Cabinet dimensions: 440x340x800 mm Suitable for VDG, VEG, U2, VCF-500 etc., incl. anti-slip Rubber washers Size of drawers: 2x 330 x 315 x 130 mm 1x 330 x 315 x 280 mm | no .: 3405-221 The grinding machine is not included!

Set of quality taps and eyelets of Czech production W 2-II, order no. 341100 BSW(British Standard Whitvorth) tapping tool set, marked as W Range: W 1/2 "- W 1" Set contains: Taps and eyes: W 1/2 " , W 9/16 ", W 5/8", W 3/4 ", W 7/8", W 1 " Tap for taps adjustable in the range of four edges: 5.5-16mm Shaft for threaded round jaws: 55mm Shaft inserts for threaded round jaws: 55/38 and 55 / 45mm Material: HSS - high speed steel

Designed for Turning Knives No. 16 and 17 - see related products ISO WAUM06T300FL l = 6,20 s = 3,55 r = 0,10 < d> 10,35 d1 = 4,10

Designed for Turning Knife No. 31 - see related products ISO Name WNUM060400FL l = 8,60 s = 4,50 r = 0,10 d = 13.35; d1 = 5.16

Designed for Turning Knife No. 32 - see related products ISO Name SAUM120400FL l = 13,10 s = 4,50 r = 0,10 d = 13.10 d1 = 5.16

Designed for Turning Knives No. 32, 33 and 35 - see related products ISO Name SAUM120404F l = 13,10 s = 4,50 r = 0, 10 d = 13.10 d1 = 5.16

Set of quality taps and eyelets of Czech production UNC 0, order no. 345000 UNified thread coarse, UNC - American inch unified thread Range: size 5-40 to size .12-24(ie dia. 3,175mm to 5,486mm), basic climb Set includes: Taps and eyes: UNC 5-40 / 6-32 / 8-32 / 10-24 / 12-24(the second number always indicates the number of strokes per inch) Screw for taps: 2,5-7,1mm Shaft for threaded round jaws: 20mm Material: HSS - high speed steel

Set of quality taps and eyelets of Czech production UNC 1, order no. 345100 UNC Thread Cutting Tool Set(UNC), referred to as UNC - American Inch Thread Coil Range: 1/4 "- 1/2"(ie dia. 6.35mm to 12.7mm), basic pitch Set contains: Taps and eyes: UNC 1 / 4x20 ", 5 / 16x18, 3 / 8x16, 7 / 16x14, 1 / 2x13(the number after the "x" always indicates the number of strokes per inch) Tap for taps: 2,5-7,1mm Shaft for threaded round jaws: 25 and 38mm Shaft housing: 25/20 and 38 / 30mm Material: HSS - high speed steel