Metalworking tools

Outer plate for outer knife - for trapezoidal thread Cutter / plate for cutting outer traps Threaded taps 27U ER / L 10 TR Trapezoidal thread cutters with a pitch of 10 mm Coating: PVD TiALN Sheet material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for common to high Cutting speeds < b> Application: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Heat-resistant steel( Ni, Co, Fe, Ti) Hardened steel For cutting conditions, see enclosed catalog, page no. 56(letter No. 60). The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Plate for cutting internal knives - for trapezoidal thread Cutter / plate for cutting internal trapezoidal threads 27U IR / L 8 TR Trapezoidal thread cutting blades with a pitch of 8 mm Coating: PVD TiALN Sheet material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for common to high cutting speeds < b> Application: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Heat-resistant steel(Ni, Co, Fe, Ti) Hardened steel For cutting conditions, see the enclosed catalog, page no. 56(letter No. 60). The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Plate for cutting internal knives - for trapezoidal thread Cutter / plate for cutting internal trapezoidal threads 27U IR / L 9 TR Trapezoidal thread cutting blades with 9 mm pitch < br> Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for common to high cutting speeds Application: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Heat-resistant steel(Ni, Co, Fe, Ti) Hardened steel For cutting conditions, see the enclosed catalog, page no. 56(letter No. 60). The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Single-sided insert for internal trapezoids - for trapezoidal thread Cutter / insert for cutting internal trapezoidal threads — 27U IR / L 10 TR This plate has only one run !!! , fits only in 27U holders Sheets for cutting trapezoidal threads with a pitch of 10 mm Coating: PVD TiALN Sheet material: BMA - universal use , suitable for classic and stainless steel, non-traditional materials, for common to high cutting speeds Use: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Heat resistant steel(Ni, Co, Fe, Ti) Hardened steel A… Ëo For cutting conditions, see the enclosed catalog, page no. 56(letter No. 60). The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Set of 5 pcs - 3-edged right-cut ground spiral cobalt drill bits for steel and stainless steel with cylindrical shank Set contains diameters: 4 / 5 / 6 / 8 / 10 mm Drill length: Short series - lengths see attached photo Material: HSSE - High-speed steel Co5 / HSSCo5 Standard: DIN338 ( replaces PN 2907 / PN2907 ) Usage: Stand and column drills, NC and CNC machines, possibly also hand drills. Structural steel Unalloyed and alloyed steel, cast steel with strength up to 850N/mm2 Stainless steel Wrought aluminum alloys and other aluminum alloys Advantages: Higher geometry / hole ovality - depending on the machine used, accuracy up to IT9 can be achieved. Thanks to three blades, the feed can be increased by up to 60%. The special geometry of the tip of the drill prevents the drill from slipping. Thanks to this, there is no need to use a punch to center the holes. The drill does not jam when re-drilling an existing hole. The chip is removed without a problem, less wear on the drill bit / longer service life, thanks to the distribution of the engagement on 3 blades. Cat. no.: 283054005

The photo is illustrative - new - we will take a photo immediately after stocking. Set of 19 pcs - 3-edged right-cut ground spiral cobalt drill bits for steel and stainless steel with cylindrical shank Set contains diameters: 1.0-10.0mm x 0.5mm Length of the drill: Short series - lengths see attached photo Material: HSSE - High-speed steel Co5 / HSSCo5 Standard: DIN338 ( replaces PN 2907 / PN2907 ) Usage: Stand and column drills, NC and CNC machines, possibly even hand drills. Structural steel Unalloyed and alloyed steel, cast steel with strength up to 850N/mm2 Stainless steel Wrought aluminum alloys and other aluminum alloys Advantages: Higher geometry / hole ovality - depending on the machine used, accuracy up to IT9 can be achieved. Thanks to three blades, the feed can be increased by up to 60%. The special geometry of the tip of the drill prevents the drill from slipping. Thanks to this, there is no need to use a punch to center the holes. The drill does not jam when re-drilling an existing hole. The chip is removed without a problem, less wear on the drill bit / longer service life, thanks to the distribution of the engagement on 3 blades. Cat. no.: 283057019

The photo is illustrative - new - we will take a photo immediately after stocking. Set of 24 pcs - 3-edged right-cut ground spiral cobalt drill bits for steel and stainless steel with cylindrical shank Set contains diameters: 1.0-10.5mm x 0.5mm drill bits 3.3 / 4.2 / 6.8 / 10.2 mm Drill length: Short series - lengths see attached photo Material: HSSE - High speed steel Co5 / HSSCo5 Standard: DIN338 ( replaces PN 2907 / PN2907 ) Usage: Stand and column drills, NC and CNC machines, possibly also hand drills. Structural steel Unalloyed and alloyed steel, cast steel with strength up to 850N/mm2 Stainless steel Wrought aluminum alloys and other aluminum alloys Advantages: Higher geometry / hole ovality - depending on the machine used, accuracy up to IT9 can be achieved. Thanks to three blades, the feed can be increased by up to 60%. The special geometry of the tip of the drill prevents the drill from slipping. Thanks to this, there is no need to use a punch to center the holes. The drill does not jam when re-drilling an existing hole. The chip is removed without a problem, less wear on the drill bit / longer service life, thanks to the distribution of the engagement on 3 blades. Cat. no.: 283057024

The photo is illustrative - new - we will take a photo immediately after stocking. Set of 25 pcs - 3-edged right-cut ground spiral cobalt drill bits for steel and stainless steel with cylindrical shank Set contains diameters: 1.0-13.0mm x 0.5mm Length of the drill: Short series - lengths see attached photo Material: HSSE - High-speed steel Co5 / HSSCo5 Standard: DIN338 ( replaces PN 2907 / PN2907 ) Usage: Stand and column drills, NC and CNC machines, possibly even hand drills. Structural steel Unalloyed and alloyed steel, cast steel with strength up to 850N/mm2 Stainless steel Wrought aluminum alloys and other aluminum alloys Advantages: Higher geometry / hole ovality - depending on the machine used, accuracy up to IT9 can be achieved. Thanks to three blades, the feed can be increased by up to 60%. The special geometry of the tip of the drill prevents the drill from slipping. Thanks to this, there is no need to use a punch to center the holes. The drill does not jam when re-drilling an existing hole. The chip is removed without a problem, less wear on the drill bit / longer service life, thanks to the distribution of the engagement on 3 blades. Cat. no.: 283057025

Set of 5 pcs multi-purpose right-cut ground twist drills / "tooth drills" with cylindrical shank - with graduated tip Set includes drill bits: 4 / 5 / 6 / 8 / 10 mm Drill length: Short series - lengths see attached photo Material: HSS - High-speed steel Standard: DIN338 ( replaces PN 2907 / PN2907 ) Usage: - universal Steel, cast iron, hard wood, plastic, acrylic glass, non-ferrous metals Advantages: Universal use Easier drilling - no need to pre-drill the hole with a smaller average. Perfect for tapping Cat. no.: 283064005

Set of 24 pcs multi-purpose right-cut ground spiral drills / "tooth drills" with cylindrical shank - with graduated tip The set includes drills: 1.0-10.5mm x 0.5mm drills 3.3 / 4, 2 / 6.8 / 10.2 mm Drill length: Short series - lengths see attached photo Material: HSS - High-speed steel Standard: DIN338 ( replaces PN 2907 / PN2907 ) Usage: - universal Steel, cast iron, hardwood, plastic, acrylic glass, non-ferrous metals Advantages: Universal use Easier drilling - it is not necessary to pre-drill a hole with a smaller diameter. Perfect for tapping Cat. no.: 283064024

Thread Metric Threaded Thread Special Fiber for Repairing Outside and Inside Right and Left Metric Threads. You can repair threads with this climb (all on one file): M 0,8 - M1,0 - M1,25 - M1,5 - M1,75 - M2,0 - M2,5 - M3,0 To correct the internal threads (mothers), the file ends are used. On each side, 4 kinds of thread pitch are adapted to thread the damaged thread. Correcting the external threads (screws) is done flats closer to the center of the file. Obj. number: 286211702310

Threaded Threaded Threaded Thread for All Thread UN (UNC and UNF) CSN ISO 68-2 Special file for repair of UNC and UNF internal threads (top angle 60 °). Repair threads with this climb (all on one file): 11-12-13-14-16-18-20-24 For the repair of internal threads (mothers), the ends of the file are used. On each side, 4 kinds of thread pitch are adapted to thread the damaged thread. Correcting the external threads (screws) is done flats closer to the center of the file. Obj. number: 286211702330