Metalworking tools

Vertical external replaceable cutting insert 22 V EL N60 BMA / 22 V IR N60 BMA Size: 22 Gradient: 0,5 - 5,0 Height 4mm | Plate is inserted into vertical brackets - the cutting edge is visible on the second photo. Coating: PVD TiALN Material: BMA - Universal Application, Suitable for Classical and Stainless Steel, Non-traditional Materials, for Normal to High Cutting Speed ?? Application : Steel: P20-P40 Stainless Steel Cast Iron: K20-K30 Heat Resistant Steel (Ni, Co, Fe, Ti) enclosed catalog, page 56 (sheet 60).

Vertical external replaceable cutting insert 22 V ER N60 BMA / 22 V IL N60 BMA Size: 22 Gradient: 0,5 - 5,0 Height 4mm | Plate is inserted into vertical brackets - the cutting edge is visible on the second photo. Coating: PVD TiALN Material: BMA - Universal Application, Suitable for Classical and Stainless Steel, Non-traditional Materials, for Normal to High Cutting Speed ?? Application : Steel: P20-P40 Stainless Steel Cast Iron: K20-K30 Heat Resistant Steel (Ni, Co, Fe, Ti) enclosed catalog, page 56 (sheet 60).

Set of short three-cut grooving machines with item over center(drilling) with weldon face Set contents: 4x7, 5x8, 6x8, 8x11, 10x13, 12x16 mm Tolerance of cutting diameter accuracy: e8 Clamping shanks: 6mm(d4 d5 d6), 10mm(d8 d10), 12mm(d12) Number of bars — itA… —: 3 bA… â „c. Material: HSSCo8(contains 8 packs) Standard: DIN 1835 B, DIN 327 Application: For machining in 3 axes For materials with strength up to 900MPa(for more see Figure 2) Ord. Code: 230418.SET4-12

Overall Length: 170mm Pin Diameter: 7,5mm For Collet Clamp - Small Yoke: 44mm 220731/22 0731

9x19 mm Slot Cutter (9x19mm) with Spherical Shank Ends with Slot for Welding Clamp Diameter D (e8): 9 mm Cutter Length l: 19mm Clamping Shank D (9mm) h6): 10mm Overall length: 69mm Number of bits: 3 Material: HSSCo8 (contains 8% cobalt) Helix Angle: 30 ° Face Angle: 12 ° DIN 1835 B, DIN 327 Application : For 3 Axis Machining For Materials With Strength Up to 900MPa (for more details, see Figure 2) Ref. code: 231418.090

American hand tap UNC 1-64 - set Size: UNC no. 1 (corresponds to 1.854mm) DIN 352 UNC - Uniform Thread Coarse unification of American and British whitworth threads)

American hand tap UNC 2-56 - set Size: UNC no. 2 (corresponds to 2,184mm) Gradient: 56 turns per inch, basic Face: 2B DIN 352 Material: HSS - Rapid Steel - UNC - Uniform Thread Coarse unification of American and British whitworth threads)

American hand tap UNC 3-48 - set Size: UNC no. 3 (corresponds to 2,515mm) DIN 352 UNC - Uniform Thread Coarse unification of American and British whitworth threads)

American hand tap UNC 4-40 - set Size: UNC no. 4 (corresponds to 2,845mm) Gradient: 40pcs per inch, basic Toggle: 2B DIN 352 Material: HSS - High Speed ??Steel - UNC - Uniform Thread Coarse unification of American and British whitworth threads)

American hand tap UNC 5-40 - set Size: UNC no. 5 (3,175mm) DIN 352 UNC - Uniform Thread Coarse unification of American and British whitworth threads)

Hand tap UNC 6-32 - set Size: UNC no. 6 (corresponds to 3,505mm) Gradient: 32pcs per inch, basic Face: 2B DIN 352 Material: HSS - High Speed ??Steel - UNC - Uniform Thread Coarse unification of the US and UK whitworth thread) This thread is for example found on computers for: PCI / AGP cards - Attaching the case covers of the case to the skeleton

American hand tap UNC 8-32 - set Size: UNC no. 8 (corresponds to 4,166mm) Gradient: 32pcs per inch, basic Toggle: 2B DIN 352 Material: HSS - High Speed ??Steel - UNC - Uniform Thread Coarse unification of American and British whitworth threads)