Metalworking tools

Vertical external exchangeable cutting insert 16 V ER A55 BMA / 16 V IL A55 BMA Size: 16 Climb: 48 - 16 walks per inch(The advantage of this board is the possibility of cutting to the "end" thanks to the raised tip to the side) Insert height: 3.6mm The insert is inserted into the vertical holders - the cutting edge is visible on the second photo. Coating: PVD TiALN Sheet material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for ordinary High to high cutting speeds Application: Steel: P20-P40 Stainless steel Cast iron: K20-K30 stainless steel(Ni, Co, Fe, Ti) Hardened steel For cutting conditions, see enclosed catalog, page no. 56(list Ä. 60). The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Vertical external exchangeable cutting insert 16 V ER A60 BMA / 16 V IL A60 BMA Size: 16 Climb: 0.5 - 1.5(The advantage of this plate is the possibility of cutting until the "end" thanks to the raised tip to the side) Insert height: 3.6mm The insert is inserted into vertical holders - the cutting edge can be seen on the second photo. Coating: PVD TiALN Sheet material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for ordinary High to high cutting speeds Application: Steel: P20-P40 Stainless steel Cast iron: K20-K30 stainless steel(Ni, Co, Fe, Ti) Hardened steel For cutting conditions, see enclosed catalog, page no. 56(list Ä. 60). The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Vertical external replaceable edge thread insert 16 V ER AG60 BMA / 16 V IL AG60 BMA Size: 16 Pitch: 0.5 - 3.0( the advantage of this insert is the possibility of cutting "to the end" thanks to the offset tip to the side) Apical angle: 60° Insert height: 3.6 mm The insert is inserted into vertical holders - the cutting edge can be seen in the second photo. Coating: PVD TiALN Wave material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage : Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel Cutting conditions see attached catalogue, page no. 56(sheet no. 60). The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Hand tap G 1/16 "for pipe thread Pitch: 28 walks per inch, basic Material: HSSE VA - cobalt high speed steel - stainless steel Coating: OX - oxidation Standard: DIN5157(replacement for ÄOSN 22 3012 / CSN 223012) Application: Structural steels up to 800MPa Free-cutting steels up to 750MPa Tool steels up to 900MPa Cast steel 500-700 MPa Tempered cast iron 450-700 MPa Stainless and heat-resistant steels up to 1100MPa Cast steel 700-900Mpa Bronze, brass, zinc, copper and other lightweight metals

Manual orchard tap G 1/4 "for pipe thread Pitch: 19 walking per inch, basic Material: HSSE VA - cobalt high speed steel - stainless steel Coating: OX - oxidation Standard: DIN5157(replacement for ÄOSN 22 3012 / CSN 223012) Application: Structural steels up to 800MPa Free-cutting steels up to 750MPa Tool steels up to 900MPa Cast steel 500-700 MPa Tempered cast iron 450-700 MPa Stainless and heat-resistant steels up to 1100MPa Cast steel 700-900Mpa Bronze, brass, zinc, copper and other lightweight metals

Hand tap G 1/8 "for pipe thread Climb: 28 walks per inch, basic Material: HSSE VA - cobalt high speed steel - stainless steel Coating: OX - oxidation Standard: DIN5157(replacement for ÄOSN 22 3012 / CSN 223012) Application: Structural steels up to 800MPa Free-cutting steels up to 750MPa Tool steels up to 900MPa Cast steel 500-700 MPa Tempered cast iron 450-700 MPa Stainless and heat-resistant steels up to 1100MPa Cast steel 700-900Mpa Bronze, brass, zinc, copper and other lightweight metals

Hand tap G 3/4 "for pipe thread Pitch: 14 walks per inch, basic Material: HSSE VA - cobalt high speed steel - stainless steel Coating: OX - oxidation Standard: DIN5157(replacement for ÄOSN 22 3012 / CSN 223012) Application: Structural steels up to 800MPa Free-cutting steels up to 750MPa Tool steels up to 900MPa Cast steel 500-700 MPa Tempered cast iron 450-700 MPa Stainless and heat-resistant steels up to 1100MPa Cast steel 700-900Mpa Bronze, brass, zinc, copper and other lightweight metals

Hand set tap G 3/8 "for pipe thread Pitch: 19 walking per inch, basic Material: HSSE VA - cobalt high speed steel - stainless steel Coating: OX - oxidation Standard: DIN5157(replacement for ÄOSN 22 3012 / CSN 223012) Application: Structural steels up to 800MPa Free-cutting steels up to 750MPa Tool steels up to 900MPa Cast steel 500-700 MPa Tempered cast iron 450-700 MPa Stainless and heat-resistant steels up to 1100MPa Cast steel 700-900Mpa Bronze, brass, zinc, copper and other lightweight metals

Machine tap M 2 straight groove Gradient: 0.4, basic Face: ISO2 - Cut thread profile Standard: DIN 371 (reinforced stopper) Material: HSSE ( High-speed steel 5% Cobalt)

TK / HA / PVD hard metal drill bit Diameter: 2,0mm Length: 3D Helix length: 12mm Overall length: 38mm d1 = d2 Helix Angle: 30 - 35 ° Angle of Tip: 118 ° TiAlN (Titan Aluminum Nitride) Carbide: Fine K20 / K30 Standard: DIN6539 / DIN1897 Application: Steel, stainless steel, titanium, aluminum, nickel, non-ferrous metals, a carbide drill, which was manufactured based on standard HSS drills. I.e. these drills have the same length, helix and tip angle as standard HSS drill bits. We are able to supply these drills with non-coated or other coating (TiN) - see photo

TK / HA / PVD hard metal drill bit Diameter: 7,8mm Length: 3D Helix length: 37mm Overall length: 79mm d1 = d2 Helix Angle: 30 - 35 ° Angle of Tip: 118 ° TiAlN (Titan Aluminum Nitride) Carbide: Fine K20 / K30 Standard: DIN6539 / DIN1897 Application: Steel, stainless steel, titanium, aluminum, nickel, non-ferrous metals, a carbide drill, which was manufactured based on standard HSS drills. I.e. these drills have the same length, helix and tip angle as standard HSS drill bits. We are able to supply these drills with non-coated or other coating (TiN) - see photo

M3-M12 M3, M4, M5, M6, M8, M10, M12, CSN 223043 (straight groove with chip breaker) Taps: M3, M4, M5, M6, M8, M10, M12, PN 8/3044 (spiral groove) Taps for DIN 1814 Taps Material: HSSE - high-speed steel (HSS Co5)