Metalworking tools

Interchangeable blade thread insert 16 IR 72 UN BMA Size : 16 Number of strokes per inch : 72 Peak angle : 60° Height (to edge) : 3.47mm Suitable for cutting internal inch unified thread, pitch UN 72 z/1" - for example for threads: UNF no.1 Coating: PVD TiALN Insert material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Use: Steel: P20-P40 Stainless steel Cast iron : K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel For cutting conditions, see attached catalog, page No. 56 (sheet No. 60). >Cat. No.: The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Interchangeable insert TN 16IR72W Size : 16 Number of strokes per inch : 72 Peak angle : 55° Height (to edge) : 3.47mm Suitable for cutting an internal inch whitworth thread Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel See attached catalog for cutting conditions, page no. 56(sheet no. 60). Cat. no.: The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Interchangeable TN 16IRA55 Edge Threaded Insert - Universal 55° A55 Size : 16 Pitch : 16 - 48 steps per inch Peak angle : 55° Height (to edge) : 3.47mm Suitable for cutting internal thumb threads, pitch 16 - 48 strokes per inch Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, unconventional materials, for normal to high cutting speeds Usage: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel For cutting conditions, see attached catalogue, page no. 56 (sheet no. 60). Cat. no.: The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Interchangeable Thread Insert TN 16IRAG55 - Universal 55 ° AG55 Size: 16 Gradient: 8 - 48 Strokes per inch Height (by Cut): 3,47mm Suitable for cutting of inner inch thread, pitch 8 - 48 strokes per inch Coating: PVD TiALN Material of blade: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for common Application: Steel: P20-P40 Stainless Steel Cast Iron: K20-K30 Heat Resistant Steel (Ni, Co, Fe , Ti) Hardened steel Cutting conditions see enclosed catalog, page 56 (sheet 60). Kat. No .:

Interchangeable TN 16IRG55 Edge Threaded Insert - Universal 55° G55 Size : 16 Pitch : 8 - 14 runs per inch Peak angle : 55° Height (to edge) : 3.47mm Suitable for cutting internal thumb threads, pitch 8 - 14 strokes per inch Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, unconventional materials, for normal to high cutting speeds Usage: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel For cutting conditions, see attached catalogue, page no. 56 (sheet no. 60). Cat. no.: The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Insert for internal knife - for trapezoidal thread Knife / insert for cutting internal trapezoidal threads 16U IR/L 5 TR Inserts for cutting trapezoidal threads with a pitch of 5 mm Coating: PVD TiALN Wave material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel See cutting conditions attached catalogue, page no. 56(sheet no. 60). The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Vertical external exchange insert 16 V ER 11.5 NPT BMA / 16 V IL 11.5 NPT BMA Size: 16 Pitch: 11.5 walking per inch(The advantage of this plate is the possibility of cutting to the "end" thanks to the raised tip to the side ›) With this plate you solve NPT 1" to NPT 2 "threads Plate height: 3,6mm The plate is inserted !To the vertical holders - the cutting edge is visible in the second photo. Coating: PVD TiALN Sheet material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for ordinary High to high cutting speeds Application: Steel: P20-P40 Stainless steel Cast iron: K20-K30 stainless steel(Ni, Co, Fe, Ti) Hardened steel For cutting conditions, see enclosed catalog, page no. 56(list Ä. 60). The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Vertical external exchangeable cutting insert 16 V ER 14 NPT BMA / 16 V IL 14 NPT BMA Size : 16 Climb: 14 walks per inch(The advantage of this board is the possibility of cutting to the "end" thanks to the raised tip to the side) With this insert you can cut NPT 1/2 ", NPT 5/8", NPT 3/4 ", NPT 7/8" threads Insert height: 3.6mm The plate is inserted into the vertical holders - the cutting edge can be seen in the second photo. Coating: PVD TiALN Sheet material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for ordinary High to high cutting speeds Application: Steel: P20-P40 Stainless steel Cast iron: K20-K30 stainless steel(Ni, Co, Fe, Ti) Hardened steel For cutting conditions, see enclosed catalog, page no. 56(list Ä. 60). The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Vertical external exchange insert 16 V ER 18 NPT BMA / 16 V IL 18 NPT BMA Size : 16 Climb: 18 walks per inch(The advantage of this board is the possibility of cutting to the "end" thanks to the raised tip to the side) With this plate you cut NPT 1/4 "and NPT 3/8" threads Plate height: 3.6mm The plate is inserted into vertical holders - the cutting edge can be seen in the second photo. Coating: PVD TiALN Sheet material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for ordinary High to high cutting speeds Application: Steel: P20-P40 Stainless steel Cast iron: K20-K30 stainless steel(Ni, Co, Fe, Ti) Hardened steel For cutting conditions, see enclosed catalog, page no. 56(list Ä. 60). The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Vertical external exchange insert 16 V ER 27 NPT BMA / 16 V IL 27 NPT BMA Size : 16 Climb: 27 walks per inch(The advantage of this board is the possibility of cutting to the "end" thanks to the raised tip to the side) With this plate you can cut NPT 1/16 "and NPT 1/8" threads Plate height: 3.6mm The plate is inserted into vertical holders - the cutting edge can be seen in the second photo. Coating: PVD TiALN Sheet material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for ordinary High to high cutting speeds Application: Steel: P20-P40 Stainless steel Cast iron: K20-K30 stainless steel(Ni, Co, Fe, Ti) Hardened steel For cutting conditions, see enclosed catalog, page no. 56(list Ä. 60). The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Vertical external exchangeable cutting insert 16 V ER A55 BMA / 16 V IL A55 BMA Size: 16 Climb: 48 - 16 walks per inch(The advantage of this board is the possibility of cutting to the "end" thanks to the raised tip to the side) Insert height: 3.6mm The insert is inserted into the vertical holders - the cutting edge is visible on the second photo. Coating: PVD TiALN Sheet material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for ordinary High to high cutting speeds Application: Steel: P20-P40 Stainless steel Cast iron: K20-K30 stainless steel(Ni, Co, Fe, Ti) Hardened steel For cutting conditions, see enclosed catalog, page no. 56(list Ä. 60). The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Vertical external exchangeable cutting insert 16 V ER A60 BMA / 16 V IL A60 BMA Size: 16 Climb: 0.5 - 1.5(The advantage of this plate is the possibility of cutting until the "end" thanks to the raised tip to the side) Insert height: 3.6mm The insert is inserted into vertical holders - the cutting edge can be seen on the second photo. Coating: PVD TiALN Sheet material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for ordinary High to high cutting speeds Application: Steel: P20-P40 Stainless steel Cast iron: K20-K30 stainless steel(Ni, Co, Fe, Ti) Hardened steel For cutting conditions, see enclosed catalog, page no. 56(list Ä. 60). The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.