Metalworking tools

Machine tap with straight groove and chip breaker Fitting: ISO2 (6H) Material: HSSE (High speed steel + 5% Cobalt) Coating: uncoated Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 Brass with a long chip Free-cutting steel, structural and case-hardening steel Spherical and malleable cast iron Non-alloy and low-alloy copper alloys Aluminum alloys with Si content

Right-handed blackened passivated twist drill for steel with cylindrical shank Drill length: Medium series - lengths see attached photo Drilling depth: 5xD Edge angle: 118 ° Helix angle: 25 ° to 30 ° Material: HSS - High speed steel Standard: CSN 22 1121, DIN338RN / DIN 338 RN Usage: General - hand, stand, column drills Alloy and non-alloy steel, steel casting with strength up to 900 N / mm2 Gray, malleable / ductile cast iron, sintered steel, short-chip aluminum alloy, bronze, tough brass.

Machine tap with straight groove and chip breaker 800X Fitting: ISO2 (6H) Material: HSSE (High speed steel + 5% Cobalt) Coating: TiN - Titanium Nitride Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: Steel Food stainless steel Cast iron Non-ferrous metals

Machine tap with straight groove and chip breaker 800X Fitting: ISO3 (6G) - plus tolerance for threads, where surface treatment (galvanization, etc.) will be applied Material: HSSE (High speed steel + 5% Cobalt) Coating: TiN - Titanium Nitride Grounded thread profile Standard: DIN 371, DIN374, DIN376 Usage: Steel Food grade stainless steel Cast iron Non-ferrous metals

Machine tap with straight groove and chip breaker Fitting: ISO2 (6H) Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 1.4: Alloy steels, cold drawn tool steel up to 1000N / mm2 1.5: Hardened and hardened steels up to 38 HRC up to 1200N / mm2 2.1: Ferritic and martensitic stainless steels up to 1000N / mm2 2.3: Refractory stainless steel up to 1100N / mm2 3.3: Ball and malleable cast iron up to 700N / mm2 3.4: Ball and malleable cast iron up to 1000N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 6.4: Bronze and aluminum up to 1200N / mm2 7.4: Aluminum alloys with a silicon content of> 10%, up to 400 N / mm2 8.2: Thermosets and hardened plastics

Machine tap with straight groove and chip breaker, made of sintered steel Fitting: ISO2 (6HX) Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2 1.6: Alloys of steel and hardened steel up to 44 HRC 3.1: Gray cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6: Brass (copper-zinc steels with short chips) 4.9: Copper alloys with short chips

Machine tap with straight groove and chip breaker, made of sintered steel, type PM TS Fitting: ISO2 (6HX) Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2 1.6: Alloys of steel and hardened steel up to 44 HRC 3.1: Gray cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6: Brass (copper-zinc steels with short chips) 4.9: Copper alloys with short chips

Machine tap (high speed) M, straight slot Fitting: ISO2 / 6H - ground thread profile Standard: DIN 371 Thread lead: C, 2 turns - see attached photo Material: HSSE (High speed steel + 5% Cobalt) Ground thread profile Usage: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 Brass with a long chip Free-cutting steel, structural and case-hardening steel Spherical and malleable cast iron Non-alloy and low-alloy copper alloys Aluminum alloys with Si content

Machine tap with straight groove, type GG Material: HSSE (High speed steel + 5% Cobalt) Coating: TiCN Ground thread profile Standard: DIN 5156 Application - cast iron 3.1: Gray cast iron up to 400N / mm2 3.2: Ball cast iron up to 550N / mm2 3.3: Malleable cast iron up to 500N / mm2 3.4: Malleable cast iron up to 800N / mm2 3.5: Ductile iron up to 700N / mm2 3.6: Ductile iron up to 1400N / mm2

Machine tap with straight groove, type GG Fitting: ISO2 (6HX) Material: HSSE (High speed steel + 5% Cobalt) Coating: TiCN Ground thread profile Standard: DIN 371, DIN374, DIN376 Application - cast iron 3.1: Gray cast iron up to 400N / mm2 3.2: Ball cast iron up to 550N / mm2 3.3: Malleable cast iron up to 500N / mm2 3.4: Malleable cast iron up to 800N / mm2 3.5: Ductile iron up to 700N / mm2 3.6: Ductile iron up to 1400N / mm2

Machine tap with straight groove, made of sintered steel Fitting: ISO2 (6HX) Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2 1.6: Alloys of steel and hardened steel up to 44 HRC 3.1: Gray cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6: Brass (copper-zinc steels with short chips) 4.9: Copper alloys with short chips

Machine tap with straight groove, made of sintered steel, type PM TS 1400 HT TC Fitting: ISO2 (6HX) Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2 1.6: Alloys of steel and hardened steel up to 44 HRC 3.1: Gray cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6: Brass (copper-zinc steels with short chips) 4.9: Copper alloys with short chips