Measuring stands and indicators

Manetized Dial Stand with Central Lock / Central Lock The arms are made of aluminum (ALU), making them lighter. One-screw central tightening. Clamping force of magnet 784N The end of the arm is fine, this is set separately. The magnetic base is from the bottom of the prism. Base Dimensions: 50x60mm Max. arm length from base to tailgate: 275mm

Hydraulic stand for indicators with magnetic base and central locking / central locking Distance from table top to clamping eye for indicator: 420mm Magnetic compression: 784N Magnet dimensions: 50x60mm Centrally tighten one screw. At the end of the upper arm is a fine building that is sewn separately. Thanks to the hydraulic design, the stand is more accurate and sturdy. The magnetic base is from the bottom of the prism. Hydraulic stands should NOT be stored tight (eg overnight). The stand should not be tightened for more than 5 hours.

The set is suitable for repairing the stand RT_MS_HY - see related products. There is no guarantee that it will be suitable for stands of another brand / seller! Set contains: 2x rubber ring 3,68x1,78mm 1x rubber ring 14x3mm 2x rubber ring 8x2mm 1x rubber ring 7x2mm 1x 50ml - hydraulic oil SHELL Tellus SV V 32 Price is per set only. If you are interested in hanging the stands with us, the total price of the repair is 180 CZK without VAT.

Home Vacuum indicators stand - with a vacuum / suction base and central detent / Home central locking arms are made of aluminum Home distance from the table top after a clamping lug for lamp: 310 mm Length of arms Home: 260 mm (110 150mm) Suction cup diameter: 90mm Suction cup height: 20mm Centrally tighten one screw. At the end of the upper arm is a fine building that is sewn separately. Vacuum clamping, suitable for clamping on degreased, clean and flat surfaces, and wherever a magnetic stand can not be used.

Setin dial indicator, gauge (watches) - pupitas. Alarm Clock Diameter: 32mm Resolution: 0.01mm Measuring Step: 0.8mm Accuracy: 0.008mm Adapters for 3-Axis Mounting.

Setin dial indicator, gauge (watches) - pupitas. Alarm Clock Diameter: 38mm Resolution: 0.01mm Measuring Step: 0.8mm Adapters for 3-Axis Mounting. ČSN 251820 Each indicator has its serial number.

Setin dial indicator, gauge (watch) - pupitas with ruby ??touch !!. Alarm clock diameter 32mm, resolution 0.01mm. Measurement Step 0.8mm. Adapters for mounting in 3 axes.

Setin dial indicator, gauge (watch) - pupitas with ruby ??touch !!. Alarm clock diameter 32mm, resolution 0.01mm. Measurement Step 0.8mm. Adapters for mounting in 3 axes. Calibration protocol is included.

Thousand digital indicator, dial indicator(watch) Diameter 60mm, Accuracy 10 Â ± 10 range Measuring range 0-12.5mm Switching mm / inch Dividing 0.01mm

Thyristor Digital Indicator, Dial Diameter 60mm, Accuracy ± 10 µm Measuring range 0-12.5mm Switching mm / inch 0.00001mm Battery V357

Digital dial indicator, dial gauge Diameter of alarm: 60mm (57mm) Step: 25mm Splitting: 0,01mm Accuracy: ± 20 µm Can be measured in inches and millimeters < Lithium battery power supply ABS / INC function for absolute and incremental measurement TOL function for tolerance measurement

Clamping eye, Indicator tab Diameter 35mm - Designed for dial gauges with alarm clock and 40mm rear cap. There are 4 holes for the screw fixing around the perimeter Diameter 6.5mm