Measuring instruments
-
Mitutoyo measuring instruments
-
Calipers
-
Micrometers and pasameters
-
Depth and cavity gauges
-
Measuring stands and indicators
-
Measuring boards and tables
-
Altimeters and drafts
-
Inspection pads and instruments
-
Probes and centrifuges
-
Gauges, templates and calipers
-
Protractors, Buffers, Scales, Rulers
-
Special measuring tools
-
Caliper 20.01mm, Armature
Clearance saleCheck mandrel / roller check pin Diameter: 20.01 mm Length of ground part: 106mm Total length: 120mm Tolerance: J7 (-0.001mm ; 0.001mm) Grounded and lapped surface, ground between the points Material: alloy calibration steel, 58 HRC, quality stable steel Suitable for checking the diameter and ovality of holes or can be used as control mandrel Before use, the dipstick needs to be degreased and preserved after use. Unused gauge, from excess stock
In stock12,81 € with VAT -
Caliper 20.03mm, Armour
Clearance saleCheck mandrel / roller check pin Diameter: 20.03 mm Length of ground part: 106mm Total length: 120mm Tolerance: J7 (-0.001mm ; 0.001mm) Grounded and lapped surface, ground between the points Material: alloy calibration steel, 58 HRC, quality stable steel Suitable for checking the diameter and ovality of holes or can be used as control mandrel Before use, the dipstick needs to be degreased and preserved after use. Unused gauge, from excess stock
In stock12,81 € with VAT -
Caliper 20.04mm, Armature
Clearance saleCheck mandrel / roller check pin Diameter: 20.04 mm Length of ground part: 106mm Total length: 120mm Tolerance: J7 (-0.001mm ; 0.001mm) Grounded and lapped surface, ground between the points Material: alloy calibration steel, 58 HRC, quality stable steel Suitable for checking the diameter and ovality of holes or can be used as control mandrel Before use, the dipstick needs to be degreased and preserved after use. Unused gauge, from excess stock
In stock12,81 € with VAT -
Caliper 20.05mm, Armourer
Clearance saleCheck mandrel / roller check pin Diameter: 20.05 mm Length of ground part: 106mm Total length: 120mm Tolerance: J7 (-0.001mm ; 0.001mm) Grounded and lapped surface, ground between the points Material: alloy calibration steel, 58 HRC, quality stable steel Suitable for checking the diameter and ovality of holes or can be used as control mandrel Before use, the dipstick needs to be degreased and preserved after use. Unused gauge, from excess stock
In stock12,81 € with VAT -
Caliper 20.06mm, Armourer
Clearance saleCheck mandrel / roller check pin Diameter : 20.06 mm Length of ground part : 106mm Total length : 120mm Tolerance : J7 (-0.001mm ; 0.001mm) Grounded and lapped surface, ground between the points Material: alloy calibration steel, 58 HRC, quality stable steel Suitable for checking the diameter and ovality of holes or can be used as control mandrel Before use, the dipstick needs to be degreased and preserved after use. Unused gauge, from excess stock
In stock12,81 € with VAT -
Caliper 20.07mm, Armour
Clearance saleCheck mandrel / roller check pin Diameter : 20.07 mm Length of ground part : 106mm Total length : 120mm Tolerance : J7 (-0.001mm ; 0.001mm) Grounded and lapped surface, ground between the points Material: alloy calibration steel, 58 HRC, quality stable steel Suitable for checking the diameter and ovality of holes or can be used as control mandrel Before use, the dipstick needs to be degreased and preserved after use. Unused gauge, from excess stock
In stock12,81 € with VAT -
Caliper 20.08mm, Armour
Clearance saleCheck mandrel / roller check pin Diameter : 20.08 mm Length of ground part : 106mm Total length : 120mm Tolerance : J7 (-0.001mm ; 0.001mm) Grounded and lapped surface, ground between the points Material: alloy calibration steel, 58 HRC, quality stable steel Suitable for checking the diameter and ovality of holes or can be used as control mandrel Before use, the dipstick needs to be degreased and preserved after use. Unused gauge, from excess stock
In stock12,81 € with VAT -
Caliper 20.12mm, Armature
Clearance saleCheck mandrel / roller check pin Diameter: 20.12 mm Length of ground part: 106mm Total length: 120mm Tolerance: J7 (-0.001mm ; 0.001mm) Grounded and lapped surface, ground between the points Material: alloy calibration steel, 58 HRC, quality stable steel Suitable for checking the diameter and ovality of holes or can be used as control mandrel Before use, the dipstick needs to be degreased and preserved after use. Unused gauge, from excess stock
In stock12,81 € with VAT -
Caliper 20.13mm, Armour
Clearance saleCheck mandrel / roller check pin Diameter: 20.13 mm Length of ground part: 106mm Total length: 120mm Tolerance: J7 (-0.001mm ; 0.001mm) Grounded and lapped surface, ground between the points Material: alloy calibration steel, 58 HRC, quality stable steel Suitable for checking the diameter and ovality of holes or can be used as control mandrel Before use, the dipstick needs to be degreased and preserved after use. Unused gauge, from excess stock
In stock12,81 € with VAT -
Caliper 20.14mm, Armour
Clearance saleCheck mandrel / roller check pin Diameter: 20.14 mm Length of ground part: 106mm Total length: 120mm Tolerance: J7 (-0.001mm ; 0.001mm) Grounded and lapped surface, ground between the points Material: alloy calibration steel, 58 HRC, quality stable steel Suitable for checking the diameter and ovality of holes or can be used as control mandrel Before use, the dipstick needs to be degreased and preserved after use. Unused gauge, from excess stock
In stock12,81 € with VAT -
Caliper 20.15mm, Armour
Clearance saleCheck mandrel / roller check pin Diameter: 20.15 mm Length of ground part: 106mm Total length: 120mm Tolerance: J7 (-0.001mm ; 0.001mm) Grounded and lapped surface, ground between the points Material: alloy calibration steel, 58 HRC, quality stable steel Suitable for checking the diameter and ovality of holes or can be used as control mandrel Before use, the dipstick needs to be degreased and preserved after use. Unused gauge, from excess stock
In stock12,81 € with VAT -
Caliper 20.17mm, Armour
Clearance saleCheck mandrel / roller check pin Diameter: 20.17 mm Length of ground part: 106mm Total length: 120mm Tolerance: J7 (-0.001mm ; 0.001mm) Grounded and lapped surface, ground between the points Material: alloy calibration steel, 58 HRC, quality stable steel Suitable for checking the diameter and ovality of holes or can be used as control mandrel Before use, the dipstick needs to be degreased and preserved after use. Unused gauge, from excess stock
In stock12,81 € with VAT