MC hydraulic machine vice for vertical clamping, type VQCV-H, VERTEX

Machine right hydraulic vice type MC, suitable for MC / NC machines, with prismatic jaw

Width of the jaws: according to the selected variant

Additional dimensions and parameters - see the attached catalog sheet or product description for individual variants

Vise for vertical clamping of the workpiece
The vise has a ground seating surface with a groove for guide stones on the side.

The screw is encapsulated -> protection of the screw against the ingress of dust, chips and dirt.

Guarantee height of vices within 0.02mm tolerance
The mechanism pulls the jaw down when tightening.
The body is made of high-quality and highly resistant ductile cast iron FCD60
Bearing surface for workpiece hardened > 45 HRC.

Parallelism of the seating surface and the bottom of the vice: 0.01 mm / 100 mm
Rectangularity of the seating surface with jaws: 0.02 mm / 100 mm
Parallelism of the bearing surface with the workpiece: 0.02 mm / 100 mm

Clamps (4 pcs), guide stones (2 pcs), handle and transport eyes (2 pcs) are also part of the delivery.

Use hydraulic oil #68 (PARAMO HM 68 or other hydraulic oil with a viscosity of 68)