Manual - orchard and nut

Hand disposable nut tap M14x1,5 Gradient: 1,5, fine Facing: 2N Material: NO - Tool steel, Standard PN 8/3070, ČSN 223070 Kat . : 118141 Dimensions: l1 - 110mm l2 - 30mm d2 - 11.2mm a - 9.0mm Taps from NO are suitable for threading or single thread cutting.

Hand Disposable M18 Tap Mowing: 2.5, Basic Facing: 2N Material: Sh6 - Tool Steel - Standard PN 8/3070, ČSN 223070 Dimensions: l1 - 160mm l2 - 55mm d2 - 13.0mm a - without square - only one flat is grinded thread threading or piece thread cutting.

American hand tap UNC 5-40 - set Size: UNC no. 5 (3,175mm) DIN 352 UNC - Uniform Thread Coarse unification of American and British whitworth threads)

American hand tap UNC 12-24 - set Size: UNC no. 12 (5,486mm) DIN 352 UNC - Uniform Thread Coarse (This is unification of American and British whitworth threads)

UNC 1 "Manual Hand Tap - Set Size: UNC 1 (25.4mm) DIN 352 < br> Material: HSS - Rapid Cutting Steel UNC - Unified Thread Coarse (Unification of American and British Whitworth Thread)

UNC 1/2 "hand tap set - UNC 1/2 (12.7mm) Norma : DIN 352 Material: HSS - Rapid Steel UNC - Uniform Thread Coarse (This is the unification of the American and British whitworth threads)

UNC 1/4 "UNC Hand Tap - Set Size: UNC 1/4 (6,350mm) Standard: DIN 352 Material: HSS - High Speed ??Steel UNC - Unified Thread Coarse (This is the unification of the American and British whitworth thread)

UNC 3/4 "American Hand Tap - UNC 3/4 (19.050mm) Standard: DIN 352 Material: HSS - High Speed ??Steel UNC - Unified Thread Coarse (This is the unification of the American and British whitworth thread)

UNC 3/8 "American Hand Tap - UNC 3/8 (9.525mm) Standard: DIN 352 Material: HSS - High-Speed ??Steel UNC - Unified Thread Coarse (Unification of US and British Whitworth Thread)

UNC 5/16 "UNC 5/16" Hand Set - Size: UNC 5/16 (7.938mm) Standard: DIN 352 Material: HSS - High Speed ??Steel UNC - Unified Thread Coarse (This is the unification of the American and British whitworth thread)

UNC 5/8 "UNC 5/8" Hand Set - UNC 5/8 (15.875mm) Standard: DIN 352 Material: HSS - High-Speed ??Steel UNC - Unified Thread Coarse (Unification of US and British Whitworth Thread)

UNC 7/16 "Hand Set - UNC 7/16 UNC 7/16 (11,112mm) Standard: DIN 352 Material: HSS - High Speed ??Steel UNC - Unified Thread Coarse (This is the unification of the American and British whitworth thread)