Manual - orchard and nut

Hand set tap G 1/4 "for pipe thread - cutting piece Pitch: 19 walks per inch, basic Fit: A Material: NO - Tool steel E 301SN 22 3012 / CSN 223012 NO taps are suitable for thread extension or for piece cutting nA závítA—.

G 1/8 "Hand Tap Gauge for Tubing Thread CSN 22 3012 / CSN 223012 < Taps from NO are suitable for threading or thread cutting.

G 3/4 "Hand Tap Gauge CSN 223012 / CSN 223012 < Taps from NO are suitable for threading or thread cutting.

Hand Tap G 3/8 "for Pipe Thread Angle: 19 Pips per Inch, Basic Face: A Material: NO - Tool Steel ČSN 22 3012 / CSN 223012 < Taps from NO are suitable for threading or thread cutting.

Hand Tap G 5/8 "for Tubing CSN 223012 / CSN 223012 < Taps from NO are suitable for threading or thread cutting.

G 7/8 "Hand Tap Gauge CSN 223012 / CSN 223012 < Taps from NO are suitable for threading or thread cutting.

American hand tap UNC 4-40 - set Size: UNC no. 4 (corresponds to 2,845mm) DIN 352 UNC - Uniform Thread Coarse US and UK whitworth thread unification) Taps from NO are suitable for threading or thread cutting.

American hand tap UNC 5-40 - set Size: UNC no. 5 (corresponding to 3,175mm) Gradient: 40pcs per inch, basic Tender: 2B DIN 352 Material: NO - Tool Steel - UNC - Uniform Thread Coarse US and UK whitworth thread unification) Taps from NO are suitable for threading or thread cutting.

Hand tap UNC 6-32 - set Size: UNC no. 6 (corresponds to 3,505mm) DIN 352 UNC - Uniform Thread Coarse US and UK whitworth thread unification) Taps from NO are suitable for threading or thread cutting. This thread is for example found on computers for: - case case to skeleton

American hand tap UNC 8-32 - set Size: UNC no. 8 (corresponds to 4,166mm) DIN 352 UNC - Uniform Thread Coarse US and UK whitworth thread unification) Taps from NO are suitable for threading or thread cutting.

American hand tap UNC 10-24 - set Size: UNC no. 10 (corresponds to 4,826mm) DIN 352 Material: NO - Tool Steel - UNC - Uniform Thread Coarse US and UK whitworth thread unification) Taps from NO are suitable for threading or thread cutting.

American hand tap UNC 12-24 - set Size: UNC no. 12 (corresponds to 5,486mm) DIN 352 UNC - Uniform Thread Coarse US and UK whitworth thread unification) Taps from NO are suitable for threading or thread cutting.