Manual - orchard and nut

Dimensions: UN 9/16 "x 20 Peak angle: 60 ° Climbing: 20 strokes per inch Dimensions : l1 - 190mm l2 - 50mm d2 - 11,4mm a - 8,5mm Material: HSS

Matte Tap, US Unified Whitworth Thread Size: UN 9/16 "x 26 Peak Angle: 60 ° Gradient: 26 Strokes per inch Dimensions : l1 - 190mm l2 - 50mm d2 - 11,4mm a - 8,5mm Material: HSS

Table Vise for Small Jobs Jaw Width: 45 mm, Jaws with Prism Opening: 50mm Clamping: On Table Using Vacuum Suction Cup 105mm Surface finish: blackened Joint allows tilting of the vice - 90 ° and rotation of the vice - 360 °

Workshop machine / machine vice, MBV2000-100 Screwdriver screwdriver is covered. Longitudinal and transverse prism Jaw width: 100 mm Opening: 100mm Height of jaws: 32mm Fastening bolts

Vision Vice for Heavy Duty / Extremely Use V-Jaw Has Exact Prismatic Guide Jaw Width: 150mm Opening: 150mm Jaws are made of high quality steel, hardened to 45 HRC ± 5 Screw fitting

Hand tap W 1/2 ", the first of the set Climbing: 12 turns per inch, basic Facing: Medium Material: NO - Tool steel PN 8/3011 Taps from NO are suitable for threading or single thread cutting.

Hand tap W 1/2 ", the other from the set Gliding: 12 strokes per inch, basic Facing: Medium Material: NO - Tool steel PN 8/3011 Taps from NO are suitable for threading or single thread cutting.

Hand tap W 1/2 ", third from set Gap: 12 turns per inch, basic Facing: Medium Material: NO - Tool steel PN 8/3011 Taps from NO are suitable for threading or single thread cutting.

Hand tap W 3/8 ", third of set Angle: 16 turns per inch, basic Facing: Medium Material: NO - Tool steel PN 8/3011 Taps from NO are suitable for threading or single thread cutting.

Hand tap W 5/16 ", the first of the set Angle: 18 strokes per inch, basic Facing: Medium Material: NO - Tool steel PN 8/3011 Taps from NO are suitable for threading or single thread cutting.

Hand tap W 5/8 ", the first of the set Angle: 11 strokes per inch, basic Facing: Medium Material: NO - Tool steel PN 8/3011 Taps from NO are suitable for threading or single thread cutting.

Hand tap W 5/8 ", the other from the set Grip: 11 strokes per inch, basic Facing: Medium Material: NO - Tool steel PN 8/3011 Taps from NO are suitable for threading or single thread cutting.