Manual adjustable reamer - substitute of CSN 221424 , YATO
Variant:
7,75 - 8,5 mm |
On request
|
15,63 € with VAT |
8,5 - 9,25 mm |
In stock
(3x)
|
15,95 € with VAT |
9,25 - 10,0 mm |
In stock
(5x)
|
15,34 € with VAT |
10,0 - 10,75 mm |
In stock
(5x)
|
20,42 € with VAT |
10,75 - 11,75 mm |
In stock
(4x)
|
16,29 € with VAT |
11,75 - 12,75 mm |
In stock
(7x)
|
16,89 € with VAT |
12,75 - 13,75 mm |
In stock
(5x)
|
20,96 € with VAT |
13,75 - 15,25 mm |
On request
|
23,29 € with VAT |
15,25 - 17,0 mm |
In stock
(5x)
|
24,91 € with VAT |
17,0 - 19,0 mm |
In stock
(3x)
|
21,16 € with VAT |
19,0 - 21,0 mm |
On request
|
27,31 € with VAT |
21,0 - 23,0 mm |
On request
|
28,73 € with VAT |
23,0 - 26,0 mm |
In stock
(4x)
|
30,03 € with VAT |
26,0 - 29,5 mm |
On request
|
32,86 € with VAT |
29,5 - 33,5 mm |
On request
|
39,12 € with VAT |
33,5 - 38,0 mm |
In stock
(3x)
|
48,59 € with VAT |
38,0 - 44,0 mm |
In stock
(2x)
|
49,19 € with VAT |
44,0 - 54,0 mm |
In stock
(1x)
|
93,21 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- Brand:
- YATO
- Warranty:
- 24 months
Product information
Adjustable reamer - manual - without guide bush
Range: according to the chosen variant
Standard: without standard, replacement for ČSN 221424
Manual adjustable reamers are ONLY suitable for through holes. The cutting edges ream gradually (conical hole), ie the set diameter will not be reamed until the reamer passes the cutting edges through the hole.
Adjustable reamers are used in finishing machining operations with cylindrical holes. Reamed holes have a precise size, geometric shape and a smooth surface. The size of the reamer is continuously variable within the specified range. The set size is measured via a pair of opposing knives. The commonly supplied knife geometry is suitable for machining gray cast iron and bronze.
Range: according to the chosen variant
Standard: without standard, replacement for ČSN 221424
Manual adjustable reamers are ONLY suitable for through holes. The cutting edges ream gradually (conical hole), ie the set diameter will not be reamed until the reamer passes the cutting edges through the hole.
Adjustable reamers are used in finishing machining operations with cylindrical holes. Reamed holes have a precise size, geometric shape and a smooth surface. The size of the reamer is continuously variable within the specified range. The set size is measured via a pair of opposing knives. The commonly supplied knife geometry is suitable for machining gray cast iron and bronze.
Variants
How do customers see us?
"levně, rychle, spolehlivě"
"vše OK"
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!