Machine tap M8x0.5 HSSE PM-FAN TiAlSiN ISO2(6H) DIN371 spiral (40°), FANAR
| M3 DIN371 |
In stock
(27x)
|
13,84 € with VAT |
| M4 DIN371 |
In stock
(17x)
|
14,01 € with VAT |
| M4x0,5 DIN371 |
In stock
(4x)
|
18,98 € with VAT |
| M5 DIN371 |
In stock
(34x)
|
15,44 € with VAT |
| M6 DIN371 |
In stock
(5x)
|
15,62 € with VAT |
| M8 DIN371 |
In stock
(36x)
|
18,73 € with VAT |
| M8x1,0 DIN371 |
In stock
(11x)
|
25,75 € with VAT |
| M8x0,75 DIN371 |
In stock
(4x)
|
22,69 € with VAT |
| M8x0,5 DIN371 |
In stock
(4x)
|
34,05 € with VAT |
| M10 DIN371 |
In stock
(17x)
|
24,61 € with VAT |
| M10x1,25 DIN371 |
In stock
(2x)
|
28,19 € with VAT |
| M10x1,0 DIN371 |
In stock
(3x)
|
26,06 € with VAT |
| M3 DIN376 |
In stock
(8x)
|
13,83 € with VAT |
| M4 DIN376 |
In stock
(7x)
|
16,96 € with VAT |
| M5 DIN376 |
In stock
(4x)
|
17,96 € with VAT |
| M6 DIN376 |
In stock
(3x)
|
18,88 € with VAT |
| M8 DIN376 |
In stock
(7x)
|
23,81 € with VAT |
| M8x1,0 DIN374 |
In stock
(4x)
|
29,69 € with VAT |
| M10 DIN376 |
In stock
(3x)
|
30,03 € with VAT |
| M10x1,0 DIN374 |
In stock
(4x)
|
34,78 € with VAT |
| M12 DIN376 |
In stock
(12x)
|
36,84 € with VAT |
| M12x1,5 DIN374 |
In stock
(2x)
|
42,76 € with VAT |
| M12x1,25 DIN374 |
In stock
(3x)
|
45,06 € with VAT |
| M12x1,0 DIN374 |
On request
|
42,76 € with VAT |
| M14 DIN376 |
In stock
(1x)
|
52,90 € with VAT |
| M14x1,5 DIN374 |
On request
|
59,88 € with VAT |
| M16 DIN376 |
In stock
(2x)
|
52,91 € with VAT |
| M16x1,5 DIN374 |
In stock
(1x)
|
59,47 € with VAT |
| M16x1,0 DIN374 |
In stock
(1x)
|
73,58 € with VAT |
| M18 DIN376 |
In stock
(2x)
|
72,01 € with VAT |
| M18x2,0 DIN374 |
On request
|
79,24 € with VAT |
| M18x1,5 DIN374 |
In stock
(1x)
|
75,58 € with VAT |
| M18x1,0 DIN374 |
In stock
(1x)
|
88,52 € with VAT |
| M20 DIN376 |
In stock
(1x)
|
78,36 € with VAT |
| M20x1,5 DIN374 |
On request
|
88,87 € with VAT |
| M22 DIN376 |
On request
|
106,59 € with VAT |
| M22x1,5 DIN374 |
On request
|
111,88 € with VAT |
| M24 DIN376 |
In stock
(2x)
|
107,33 € with VAT |
| M24x2,0 DIN374 |
On request
|
130,01 € with VAT |
| M24x1,5 DIN374 |
On request
|
121,44 € with VAT |
| M27 DIN376 |
In stock
(1x)
|
137,72 € with VAT |
| M27x2,0 DIN374 |
On request
|
155,01 € with VAT |
| M27x1,5 DIN374 |
On request
|
137,48 € with VAT |
| M30 DIN376 |
In stock
(1x)
|
161,85 € with VAT |
| M30x2,0 DIN374 |
On request
|
167,97 € with VAT |
| M33 DIN376 |
On request
|
244,41 € with VAT |
| M36 DIN376 |
In stock
(1x)
|
329,51 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000526417
- Brand:
- FANAR
- Warranty:
- 24 months
- Code:
- C4-565001-0081
Product information
Pitch: 0.5, fine
Fitting : ISO2 / 6H - ground thread profile
Standard: DIN 371
Thread start: C, 2 runs - see attached photo
Material: HSSE -PM( High-speed steel 5% Cobalt, sintering)
Thread grinding profile
Coating: TiAlSiN
Helix angle: 40 °
Application:
1.4: Alloy steels, cold drawn tool steel up to 1000N / mm2
1.5: Hardened and hardened steels up to 38 HRC up to 1200N / mm2
2.1: Ferritic and martensitic stainless steel up to 1000N / mm2
2.3: Heat-resistant stainless steel up to 1100N / mm2
3.3: Ball and malleable cast iron up to 700N / mm2
3.4: Ball and malleable cast iron up to 1000N / mm2
1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2
6.4: Bronze and aluminum up to 1200N / mm2
7.4: Aluminum alloys with obs ahem of silicon Si> 10%, up to 400N / mm2
8.2: Thermosets and hardened plastics
FANAR taps of the quality correspond to the Czech taps N @ rex, Series 2680
Variants
Accessories
-
Cutting paste MCC Molyslip 400g
Highly effective molybdenum paste for a denser grease consistency, suitable for drilling, thread cutting, extruding, stretching, pressing, extruding and bending. Particularly effective in machining problematic metals and alloys such as titanium and stainless steel. This is a MoS2 molybdenum paste enriched with sulfur and phosphorus compounds. The paste can be applied with a spatula or similar tool, smaller tools can be directly dipped into the paste. The paste has a low melting point, suitable for machining all kinds of metals including the most demanding metals and alloys such as titanium and nimon. The paste has excellent rinsing resistance - it can also be used under extreme pressures. Improves machining power and better surfaces can be used with it. Reduced friction prolongs tool life and allows faster material removal. Packaging 400g
On request15,28 € with VAT -
Cutting paste MCC Molyslip 100g
Highly effective molybdenum paste for a denser grease consistency, suitable for drilling, thread cutting, extruding, stretching, pressing, extruding and bending. Particularly effective in machining problematic metals and alloys such as titanium and stainless steel. This is a MoS2 molybdenum paste enriched with sulfur and phosphorus compounds. The paste can be applied with a spatula or similar tool, smaller tools can be directly dipped into the paste. The paste has a low melting point, suitable for machining all kinds of metals including the most demanding metals and alloys such as titanium and nimon. The paste has excellent rinsing resistance - it can also be used under extreme pressures. Improves machining power and better surfaces can be used with it. Reduced friction prolongs tool life and allows faster material removal. Packaging 100g
In stock4,95 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!