Machine tap M16x1,5 HSSE PM HL ISO2(6HX) DIN374 spiral (45°) MasterTap, FANAR
| M1 DIN371 (ISO1/4H) |
On request
|
51,33 € with VAT |
| M1,1 DIN371 (ISO1/4H) |
On request
|
51,33 € with VAT |
| M1,2 DIN371 (ISO1/4H) |
On request
|
51,33 € with VAT |
| M1,4 DIN371 (ISO1/4H) |
On request
|
51,33 € with VAT |
| M1,6 DIN371 (ISO2/6H) |
On request
|
45,76 € with VAT |
| M2 DIN371 (ISO2/6H) |
On request
|
22,55 € with VAT |
| M2,3 DIN371 (ISO2/6H) |
On request
|
23,41 € with VAT |
| M2,5 DIN371 (ISO2/6H) |
On request
|
22,55 € with VAT |
| M2,6 DIN371 (ISO2/6H) |
On request
|
22,55 € with VAT |
| M3 DIN371 |
On request
|
17,45 € with VAT |
| M3x0,35 DIN371 |
On request
|
59,41 € with VAT |
| M3,5 DIN371 |
In stock
(2x)
|
19,76 € with VAT |
| M3,5x0,35 DIN371 |
On request
|
58,13 € with VAT |
| M4x0,5 DIN371 |
On request
|
24,16 € with VAT |
| M4,5 DIN371 |
In stock
(4x)
|
24,04 € with VAT |
| M5 DIN371 |
In stock
(6x)
|
19,95 € with VAT |
| M5x0,5 DIN371 |
In stock
(1x)
|
33,78 € with VAT |
| M6x0,5 DIN371 |
On request
|
27,01 € with VAT |
| M6x0,75 DIN371 |
In stock
(4x)
|
26,31 € with VAT |
| M7 DIN371 |
In stock
(6x)
|
24,51 € with VAT |
| M8 DIN371 |
In stock
(8x)
|
24,83 € with VAT |
| M8x0,75 DIN371 |
On request
|
28,58 € with VAT |
| M8x1,0 DIN371 |
On request
|
34,28 € with VAT |
| M9 DIN371 |
On request
|
31,21 € with VAT |
| M10 DIN371 |
In stock
(5x)
|
32,62 € with VAT |
| M10x1,25 DIN371 |
On request
|
38,94 € with VAT |
| M10x1,0 DIN371 |
On request
|
35,53 € with VAT |
| M10x0,75 DIN371 |
On request
|
39,49 € with VAT |
| M3 DIN376 |
On request
|
22,36 € with VAT |
| M4 DIN376 |
On request
|
23,55 € with VAT |
| M5 DIN376 |
On request
|
25,63 € with VAT |
| M6 DIN376 |
In stock
(19x)
|
25,63 € with VAT |
| M8 DIN376 |
On request
|
27,59 € with VAT |
| M8x1,0 DIN374 |
In stock
(1x)
|
34,28 € with VAT |
| M10x1,25 DIN374 |
In stock
(3x)
|
46,84 € with VAT |
| M10x1,0 DIN374 |
On request
|
45,05 € with VAT |
| M10x0,75 DIN374 |
On request
|
40,52 € with VAT |
| M12x1,25 DIN374 |
On request
|
62,09 € with VAT |
| M12x1,0 DIN374 |
On request
|
45,88 € with VAT |
| M14 DIN376 |
In stock
(3x)
|
63,08 € with VAT |
| M14x1,5 DIN374 |
On request
|
74,58 € with VAT |
| M16 DIN376 |
In stock
(1x)
|
67,80 € with VAT |
| M16x1,5 DIN374 |
On request
|
66,30 € with VAT |
| M16x1,0 DIN374 |
On request
|
73,51 € with VAT |
| M18 DIN376 |
On request
|
84,30 € with VAT |
| M18x1,5 DIN374 |
In stock
(2x)
|
91,19 € with VAT |
| M20 DIN376 |
In stock
(2x)
|
100,61 € with VAT |
| M20x1,5 DIN374 |
On request
|
104,05 € with VAT |
| M22 DIN376 |
On request
|
124,75 € with VAT |
| M22x1,5 DIN374 |
On request
|
131,02 € with VAT |
| M24 DIN376 |
On request
|
122,65 € with VAT |
| M24x1,5 DIN374 |
On request
|
142,16 € with VAT |
| M27 DIN376 |
In stock
(1x)
|
161,24 € with VAT |
| M30 DIN376 |
In stock
(1x)
|
189,50 € with VAT |
| M33 DIN376 |
On request
|
286,14 € with VAT |
| M36 DIN376 |
On request
|
385,59 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000368451
- Brand:
- FANAR
- Warranty:
- 24 months
- Code:
- D4-528M01-0165
Product information
Pitch: 1,5, fine
Fitting: ISO2 / 6H - grinder Thread profile
Standard: DIN 374
Thread start: C, 2 strokes - see attached photo
Material: HSSE-PM(High speed cutting) Â!Steel 5 coating, sintering)
Grinding thread profile
Coating: HL - Balinit HardLube with carbide component(TiAlN WC / C) with hardness 2600 HV
Helix angle: 45 Â °
Application:
Universal - for steels, stainless steels, cast iron , non-ferrous metals and heat-resistant steels, can also be used in emergencies for piece cutting threads into hardened steel.
Suitable for machining centers, or for older types of numerical and conventional machines with lower power.
Variants
Accessories
-
Cutting paste MCC Molyslip 400g
Highly effective molybdenum paste for a denser grease consistency, suitable for drilling, thread cutting, extruding, stretching, pressing, extruding and bending. Particularly effective in machining problematic metals and alloys such as titanium and stainless steel. This is a MoS2 molybdenum paste enriched with sulfur and phosphorus compounds. The paste can be applied with a spatula or similar tool, smaller tools can be directly dipped into the paste. The paste has a low melting point, suitable for machining all kinds of metals including the most demanding metals and alloys such as titanium and nimon. The paste has excellent rinsing resistance - it can also be used under extreme pressures. Improves machining power and better surfaces can be used with it. Reduced friction prolongs tool life and allows faster material removal. Packaging 400g
On request15,26 € with VAT -
Cutting paste MCC Molyslip 100g
Highly effective molybdenum paste for a denser grease consistency, suitable for drilling, thread cutting, extruding, stretching, pressing, extruding and bending. Particularly effective in machining problematic metals and alloys such as titanium and stainless steel. This is a MoS2 molybdenum paste enriched with sulfur and phosphorus compounds. The paste can be applied with a spatula or similar tool, smaller tools can be directly dipped into the paste. The paste has a low melting point, suitable for machining all kinds of metals including the most demanding metals and alloys such as titanium and nimon. The paste has excellent rinsing resistance - it can also be used under extreme pressures. Improves machining power and better surfaces can be used with it. Reduced friction prolongs tool life and allows faster material removal. Packaging 100g
In stock4,94 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!