Machine tap M14x1.0 HSSE-PM TS 1400-HT TiAlSiN ISO2 DIN374 C spiral (15°) , FANAR
Product information
Pitch: 1.0, fine
Fit: ISO2 / 6HX - ground thread profile
Standard : DIN 374
Thread lead : C , 2 courses - see attached photo
Material : HSSE-PM ( High-speed steel 5% Cobalt , production by sintering )
Grounded thread profile
Coating : TiAlSiN
Helix angle : 15°
Use :
1.5 : Hardened and hardened steels up to 38 HRC up to 1400N/mm2
1.6 : Steel alloys and hardened steels up to 44 HRC
3.1 : Gray cast iron
3.3 : Nodular and malleable cast iron up to 700N/mm2
4.6 : Brass (copper-zinc steel with short chip)
4.9 : Copper alloys with short chip
Accessories
-
Cutting paste MCC Molyslip 400g
Highly effective molybdenum paste for a denser grease consistency, suitable for drilling, thread cutting, extruding, stretching, pressing, extruding and bending. Particularly effective in machining problematic metals and alloys such as titanium and stainless steel. This is a MoS2 molybdenum paste enriched with sulfur and phosphorus compounds. The paste can be applied with a spatula or similar tool, smaller tools can be directly dipped into the paste. The paste has a low melting point, suitable for machining all kinds of metals including the most demanding metals and alloys such as titanium and nimon. The paste has excellent rinsing resistance - it can also be used under extreme pressures. Improves machining power and better surfaces can be used with it. Reduced friction prolongs tool life and allows faster material removal. Packaging 400g
On request15,33 € with VAT -
Cutting paste MCC Molyslip 100g
Highly effective molybdenum paste for a denser grease consistency, suitable for drilling, thread cutting, extruding, stretching, pressing, extruding and bending. Particularly effective in machining problematic metals and alloys such as titanium and stainless steel. This is a MoS2 molybdenum paste enriched with sulfur and phosphorus compounds. The paste can be applied with a spatula or similar tool, smaller tools can be directly dipped into the paste. The paste has a low melting point, suitable for machining all kinds of metals including the most demanding metals and alloys such as titanium and nimon. The paste has excellent rinsing resistance - it can also be used under extreme pressures. Improves machining power and better surfaces can be used with it. Reduced friction prolongs tool life and allows faster material removal. Packaging 100g
On request4,96 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!