Machine tap M10x1.25 HSSE PM HL ISO2(6HX) DIN374 with chip breaker MasterTap, FANAR
M1 DIN371 (ISO1/4H) |
On request
|
51,46 € with VAT |
M1,1 DIN371 (ISO1/4H) |
On request
|
51,46 € with VAT |
M1,2 DIN371 (ISO1/4H) |
On request
|
51,46 € with VAT |
M1,4 DIN371 (ISO1/4H) |
On request
|
51,46 € with VAT |
M1,6 DIN371 (ISO2/6H) |
In stock
(2x)
|
44,64 € with VAT |
M1,7 DIN371 (ISO2/6H) |
On request
|
44,08 € with VAT |
M1,8 DIN371 (ISO2/6H) |
On request
|
44,08 € with VAT |
M2 DIN371 (ISO2/6H) |
In stock
(6x)
|
20,33 € with VAT |
M2,2 DIN371 (ISO2/6H) |
On request
|
21,30 € with VAT |
M2,3 DIN371 (ISO2/6H) |
On request
|
21,30 € with VAT |
M2,5 DIN371 (ISO2/6H) |
In stock
(14x)
|
20,33 € with VAT |
M2,6 DIN371 (ISO2/6H) |
On request
|
20,33 € with VAT |
M3 DIN371 |
In stock
(8x)
|
15,74 € with VAT |
M3x0,35 DIN371 |
On request
|
55,13 € with VAT |
M3,5 DIN371 |
On request
|
18,17 € with VAT |
M3,5x0,35 DIN371 |
On request
|
53,14 € with VAT |
M4 DIN371 |
In stock
(9x)
|
16,56 € with VAT |
M4x0,5 DIN371 |
On request
|
22,22 € with VAT |
M4,5 DIN371 |
On request
|
20,91 € with VAT |
M5 DIN371 |
In stock
(12x)
|
18,02 € with VAT |
M5x0,5 DIN371 |
In stock
(5x)
|
31,04 € with VAT |
M6 DIN371 |
In stock
(20x)
|
18,65 € with VAT |
M6x0,75 DIN371 |
In stock
(7x)
|
23,35 € with VAT |
M6x0,5 DIN371 |
On request
|
24,97 € with VAT |
M7 DIN371 |
In stock
(6x)
|
23,39 € with VAT |
M8 DIN371 |
On request
|
22,42 € with VAT |
M8x1,0 DIN371 |
On request
|
26,38 € with VAT |
M8x0,75 DIN371 |
On request
|
26,51 € with VAT |
M9 DIN371 |
On request
|
30,70 € with VAT |
M10 DIN371 |
In stock
(20x)
|
29,44 € with VAT |
M10x1,25 DIN371 |
On request
|
41,78 € with VAT |
M10x1,0 DIN371 |
On request
|
31,58 € with VAT |
M10x0,75 DIN371 |
On request
|
36,59 € with VAT |
M3 DIN376 |
On request
|
20,21 € with VAT |
M4 DIN376 |
On request
|
21,26 € with VAT |
M5 DIN376 |
On request
|
23,10 € with VAT |
M6 DIN376 |
On request
|
23,95 € with VAT |
M8 DIN376 |
On request
|
25,60 € with VAT |
M8x1,0 DIN376 |
On request
|
30,95 € with VAT |
M10 DIN376 |
In stock
(3x)
|
31,23 € with VAT |
M10x1,25 DIN376 |
On request
|
42,23 € with VAT |
M10x1,0 DIN376 |
On request
|
40,67 € with VAT |
M12 DIN376 |
In stock
(7x)
|
43,38 € with VAT |
M12x1,5 DIN376 |
On request
|
50,93 € with VAT |
M12x1,25 DIN376 |
On request
|
57,26 € with VAT |
M12x1,0 DIN376 |
On request
|
57,26 € with VAT |
M14 DIN376 |
In stock
(2x)
|
56,91 € with VAT |
M14x1,5 DIN376 |
On request
|
64,14 € with VAT |
M16 DIN376 |
In stock
(2x)
|
61,19 € with VAT |
M16x1,5 DIN376 |
On request
|
64,53 € with VAT |
M18 DIN376 |
On request
|
78,13 € with VAT |
M18x1,5 DIN376 |
On request
|
78,46 € with VAT |
M20 DIN376 |
In stock
(1x)
|
90,76 € with VAT |
M20x1,5 DIN376 |
On request
|
88,75 € with VAT |
M22 DIN376 |
On request
|
115,52 € with VAT |
M22x1,5 DIN376 |
On request
|
115,52 € with VAT |
M24 DIN376 |
In stock
(1x)
|
117,20 € with VAT |
M24x2,0 DIN376 |
On request
|
132,28 € with VAT |
M24x1,5 DIN376 |
On request
|
132,28 € with VAT |
M27 DIN376 |
On request
|
149,88 € with VAT |
M30 DIN376 |
On request
|
176,10 € with VAT |
M33 DIN376 |
On request
|
252,79 € with VAT |
M36 DIN376 |
On request
|
340,84 € with VAT |
M42x3,0 DIN376 |
On request
|
631,86 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000368369
- Brand:
- FANAR
- Warranty:
- 24 months
- Code:
- D4-118M01-0104
Product information
Pitch: 1.25, fine
Fitting: ISO2 / 6HX - ground thread profile
Standard: DIN 374
Thread start: B, 4 courses - see attached photo
Materials Â!L: HSSE-PM(High-speed steel 5 wrap, baking production)
Grinding thread profile
Coating: HL - Balinit HardLube with carbide component(TiAlN WC / C) with hardness 2600 HV
Application:
Universal - for steels, stainless steels, cast iron, non-ferrous metals and heat-resistant steels, can be used in an emergency on piece  © Cutting threads into hardened steel.
Suitable for machining centers, or for older types of numerical and conventional machines with lower power.
Variants
Alternatives
-
Machine tap M10x1.25 HSSE TiN ISO2(6H) DIN374 with chip breaker 800X, FANAR
Machine tap M 10 with chisel blade, straight groove Gradient: 1,25 , fine Tapering: ISO2 / 6H - Cut thread profile DIN 374 Rise Thread: B, 4 steps - See attached photo Material: HSSE (5% Cobalt Rapid Steel) Thread Cut Profile TiN - Titanium Nitride Usage: br> Steel & Stainless Steel Cast Iron Non-ferrous Metal
In stock28,16 € with VAT -
Machine tap M10x1.25 HSSE PM-FAN TiAlSiN ISO2(6H) DIN374 with chip breaker, FANAR
Recommended ✓Machine tap( speed cutter) M 10x1,25 with breaker for chips, straight groove 10x1,25 FAN Pitch: 1,25, fine Fitting: ISO2 / 6H - grinding profile thread Standard: DIN 374 Start thread: B, 4 courses - see attached photo Material: HSSE-PM( Quick Cut Steel! Steel 5% Cobalt, production baking) Grinding profile thread Coating: TiAlSiN Application: 1.4: Alloyed steels, tooled steel drawn cold up to 1000N / mm2 1.5: Hardened and hardened ste © steels up to 38 HRC up to 1200N / mm2 2.1: Ferritic and martensitic stainless steel steel up to 1000N / mm2 2.3: Heat resistant corrosion-resistant steel up to 1100N / mm2 3.3: Ball and tempered cast iron up to 700N / mm2 < br> 3.4: Ball and temper ed Â! Cast iron up to 1000N / mm2 1.3: Structural and carbon steel, low-alloyed steel, cast steel up to 1100N / mm2 6.4: Bronze and aluminum up to 1200N / mm2 7.4: Alloys aluminum with silicon content Si> 10%, up to 400N / mm2 8.2: Thermosets and hardened plastics Taps FANAR quality match Czech taps N @ rex, A… â „cada 3580
In stock32,20 € with VAT -
Machine tap M10x1.25 HSSE HL ISO2(6H) DIN374 with chip breaker INOX, FANAR
Machine tap M 10 with chamfer, straight groove Gradient: 1,25 , fine Facing: ISO2 / 6H - Threaded profile DIN 374 Rise Thread: B, 4 Steps - see attached photo Material: HSSE (5% Cobalt Rapid Steel) Cutting Thread Coating: HL (TiAlN Tungsten Carbide) Balinit Hardlube > Use: 2.1: Ferritic and martensitic stainless steel up to 1000N / mm2 2.2: Austenitic corrosion steel up to 850N / mm2 1.3: Structural and carbon steel, low alloy steel, up to 1100N / mm2 1.4: Alloyed steels, tool steel cold drawn to 1000N / mm2 2.3: Heat resistant corrosion-resistant steel up to 1100N / mm2
On request29,75 € with VAT -
Machine tap M10x1.25 HSSE PM S-NC TiCN ISO2(6HX) DIN374 with chip breaker, FANAR
Machine tap for NC / CNC machines (high speed) M 10 with chamfer, straight groove 10x1,25 S-NC Gradient: 1,25 , fine Facing: ISO2 / 6HX - Standard: DIN 374 Thread start: B, 4 steps - see attached photo Material: HSSE-PM (Cutting steel 5% Cobalt) > Coating: TiCN - Carbon Nitride Titanium Application: 1.3 : Structural and carbon steel, low alloy steel, steel up to 1100N / 1.4 : alloyed steels, tool steel cold drawn to 1000N / mm2 2.1 : ferritic and martensitic stainless steel up to 1000N / mm2 < : Ball and malleable cast iron up to 700N / mm2 3.4 : Cast and rolled cast iron up to 1000N / mm2 1.1: Magnetic and soft structural steel up to 400M / mm2 1.2: Structural and automotive steel up to 500N / mm2 1.5: Heavy Steel to 38 HRC to 1200N / mm2 2.2: Austenitic Steel to 850N / mm2 2.3: Heat Resistant Corrosion Resistance to 1100N / mm2 4.4: Copper and Its Alloys Up to 400N / mm2 4.5: Brass up to 600 N / mm2 4.7: Aluminum and copper alloy with long chipping up to 800N / mm2 4.8: Aluminum and zinc alloy with long chipping up to 800N / mm2 6.3: Brass with long chipping up to 700N / mm2 7.2: Aluminum alloy with silicon content up to 5%, up to 700N / mm2 7.3: Aluminum silicon alloy from 5% to 10%, up to 400N / mm2 This tap is designed for NC machines - synchronized thread cutting
On request32,20 € with VAT
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!