Machine tap M10x1.25 HSSE PM-FAN TiAlSiN ISO2(6H) DIN374 with chip breaker, FANAR
M3 DIN371 |
In stock
(31x)
|
12,81 € with VAT |
M3,5 DIN371 |
In stock
(12x)
|
14,85 € with VAT |
M4 DIN371 |
In stock
(14x)
|
12,93 € with VAT |
M5 DIN371 |
In stock
(8x)
|
14,04 € with VAT |
M5x0,75 DIN371 |
In stock
(2x)
|
25,45 € with VAT |
M6 DIN371 |
In stock
(8x)
|
14,52 € with VAT |
M6x0,75 DIN371 |
On request
|
19,94 € with VAT |
M8 DIN371 |
In stock
(65x)
|
17,46 € with VAT |
M8x1,0 DIN371 |
In stock
(5x)
|
22,49 € with VAT |
M8x0,75 DIN371 |
On request
|
21,19 € with VAT |
M10 DIN371 |
In stock
(33x)
|
23,43 € with VAT |
M10x1,25 DIN371 |
On request
|
25,07 € with VAT |
M10x1,0 DIN371 |
In stock
(10x)
|
25,25 € with VAT |
M3 DIN376 |
In stock
(1x)
|
15,77 € with VAT |
M4 DIN376 |
In stock
(12x)
|
16,23 € with VAT |
M5 DIN376 |
In stock
(54x)
|
17,91 € with VAT |
M6 DIN376 |
In stock
(43x)
|
17,45 € with VAT |
M8 DIN376 |
In stock
(10x)
|
21,02 € with VAT |
M8x1,0 DIN374 |
On request
|
26,06 € with VAT |
M9x1,0 DIN374 |
On request
|
40,60 € with VAT |
M10 DIN376 |
On request
|
26,60 € with VAT |
M10x1,25 DIN374 |
In stock
(7x)
|
32,20 € with VAT |
M10x1,0 DIN374 |
In stock
(1x)
|
32,20 € with VAT |
M12 DIN376 |
In stock
(8x)
|
35,07 € with VAT |
M12x1,5 DIN374 |
In stock
(2x)
|
39,57 € with VAT |
M12x1,25 DIN374 |
In stock
(1x)
|
44,49 € with VAT |
M12x1,0 DIN374 |
In stock
(4x)
|
41,60 € with VAT |
M14 DIN376 |
In stock
(1x)
|
45,30 € with VAT |
M14x1,5 DIN374 |
In stock
(4x)
|
52,70 € with VAT |
M14x1,25 DIN374 |
In stock
(5x)
|
44,72 € with VAT |
M14x1,0 DIN374 |
In stock
(1x)
|
46,61 € with VAT |
M16 DIN376 |
On request
|
49,11 € with VAT |
M16x1,5 DIN374 |
In stock
(4x)
|
55,04 € with VAT |
M16x1,0 DIN374 |
In stock
(2x)
|
55,65 € with VAT |
M18 DIN376 |
In stock
(1x)
|
66,70 € with VAT |
M18x2,0 DIN374 |
In stock
(1x)
|
66,24 € with VAT |
M18x1,5 DIN374 |
On request
|
69,01 € with VAT |
M18x1,0 DIN374 |
On request
|
75,72 € with VAT |
M20 DIN376 |
In stock
(10x)
|
72,77 € with VAT |
M20x2,0 DIN374 |
On request
|
103,89 € with VAT |
M20x1,5 DIN374 |
In stock
(2x)
|
77,55 € with VAT |
M22 DIN376 |
In stock
(2x)
|
98,59 € with VAT |
M22x1,5 DIN374 |
On request
|
98,59 € with VAT |
M22x1,0 DIN374 |
On request
|
117,41 € with VAT |
M24 DIN376 |
In stock
(3x)
|
99,97 € with VAT |
M24x2,0 DIN374 |
On request
|
114,99 € with VAT |
M24x1,5 DIN374 |
In stock
(1x)
|
112,86 € with VAT |
M26x1,5 DIN374 |
On request
|
197,79 € with VAT |
M27 DIN376 |
In stock
(1x)
|
127,88 € with VAT |
M27x2,0 DIN374 |
On request
|
155,39 € with VAT |
M27x1,5 DIN374 |
On request
|
141,28 € with VAT |
M30 DIN376 |
In stock
(1x)
|
150,28 € with VAT |
M33 DIN376 |
In stock
(2x)
|
215,72 € with VAT |
M36 DIN376 |
In stock
(1x)
|
272,40 € with VAT |
M42x3,0 DIN374 |
On request
|
502,05 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000444612
- Brand:
- FANAR
- Warranty:
- 24 months
- Code:
- D4-115001-0104
Product information
Pitch: 1,25, fine
Fitting: ISO2 / 6H - grinding profile thread
Standard: DIN 374
Start thread: B, 4 courses - see attached photo
Material: HSSE-PM( Quick Cut Steel! Steel 5% Cobalt, production baking)
Grinding profile thread
Coating: TiAlSiN
Application:
1.4: Alloyed steels, tooled steel drawn cold up to 1000N / mm2
1.5: Hardened and hardened ste © steels up to 38 HRC up to 1200N / mm2
2.1: Ferritic and martensitic stainless steel steel up to 1000N / mm2
2.3: Heat resistant corrosion-resistant steel up to 1100N / mm2
3.3: Ball and tempered cast iron up to 700N / mm2 < br> 3.4: Ball and temper ed Â! Cast iron up to 1000N / mm2
1.3: Structural and carbon steel, low-alloyed steel, cast steel up to 1100N / mm2
6.4: Bronze and aluminum up to 1200N / mm2
7.4: Alloys aluminum with silicon content Si> 10%, up to 400N / mm2
8.2: Thermosets and hardened plastics
Taps FANAR quality match Czech taps N @ rex, A… â „cada 3580
Variants
Accessories
-
Cutting paste MCC Molyslip 400g
Highly effective molybdenum paste for a denser grease consistency, suitable for drilling, thread cutting, extruding, stretching, pressing, extruding and bending. Particularly effective in machining problematic metals and alloys such as titanium and stainless steel. This is a MoS2 molybdenum paste enriched with sulfur and phosphorus compounds. The paste can be applied with a spatula or similar tool, smaller tools can be directly dipped into the paste. The paste has a low melting point, suitable for machining all kinds of metals including the most demanding metals and alloys such as titanium and nimon. The paste has excellent rinsing resistance - it can also be used under extreme pressures. Improves machining power and better surfaces can be used with it. Reduced friction prolongs tool life and allows faster material removal. Packaging 400g
On request15,31 € with VAT -
Cutting paste MCC Molyslip 100g
Highly effective molybdenum paste for a denser grease consistency, suitable for drilling, thread cutting, extruding, stretching, pressing, extruding and bending. Particularly effective in machining problematic metals and alloys such as titanium and stainless steel. This is a MoS2 molybdenum paste enriched with sulfur and phosphorus compounds. The paste can be applied with a spatula or similar tool, smaller tools can be directly dipped into the paste. The paste has a low melting point, suitable for machining all kinds of metals including the most demanding metals and alloys such as titanium and nimon. The paste has excellent rinsing resistance - it can also be used under extreme pressures. Improves machining power and better surfaces can be used with it. Reduced friction prolongs tool life and allows faster material removal. Packaging 100g
In stock4,95 € with VAT
Alternatives
-
Machine tap M10x1.25 HSSE PM HL ISO2(6HX) DIN374 with chip breaker MasterTap, FANAR
Universal machine tap(quick cut) M 10x1.25 with chip breaker, straight groove Pitch: 1.25, fine Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 374 Thread start: B, 4 courses - see attached photo Materials Â!L: HSSE-PM(High-speed steel 5 wrap, baking production) Grinding thread profile Coating: HL - Balinit HardLube with carbide component(TiAlN WC / C) with hardness 2600 HV Application: Universal - for steels, stainless steels, cast iron, non-ferrous metals and heat-resistant steels, can be used in an emergency on piece  © Cutting threads into hardened steel. Suitable for machining centers, or for older types of numerical and conventional machines with lower power.
On request42,23 € with VAT -
Machine tap M10x1.25 HSSE TiN ISO2(6H) DIN374 with chip breaker 800X, FANAR
Machine tap M 10 with chisel blade, straight groove Gradient: 1,25 , fine Tapering: ISO2 / 6H - Cut thread profile DIN 374 Rise Thread: B, 4 steps - See attached photo Material: HSSE (5% Cobalt Rapid Steel) Thread Cut Profile TiN - Titanium Nitride Usage: br> Steel & Stainless Steel Cast Iron Non-ferrous Metal
In stock28,16 € with VAT -
Machine tap M10x1.25 HSSE HL ISO2(6H) DIN374 with chip breaker INOX, FANAR
Machine tap M 10 with chamfer, straight groove Gradient: 1,25 , fine Facing: ISO2 / 6H - Threaded profile DIN 374 Rise Thread: B, 4 Steps - see attached photo Material: HSSE (5% Cobalt Rapid Steel) Cutting Thread Coating: HL (TiAlN Tungsten Carbide) Balinit Hardlube > Use: 2.1: Ferritic and martensitic stainless steel up to 1000N / mm2 2.2: Austenitic corrosion steel up to 850N / mm2 1.3: Structural and carbon steel, low alloy steel, up to 1100N / mm2 1.4: Alloyed steels, tool steel cold drawn to 1000N / mm2 2.3: Heat resistant corrosion-resistant steel up to 1100N / mm2
On request29,75 € with VAT
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!