Machine tap M10x1.25 HSSE ISO2(6H) DIN374 with chip breaker, FANAR
M1,6 DIN371 (*PM) |
In stock
(7x)
|
27,20 € with VAT |
M1,7 DIN371 (*PM) |
On request
|
27,20 € with VAT |
M1,8 DIN371 (*PM) |
In stock
(3x)
|
27,20 € with VAT |
M2 DIN371 (*PM) |
In stock
(8x)
|
14,35 € with VAT |
M2,2 DIN371 (*PM) |
In stock
(8x)
|
15,02 € with VAT |
M2,3 DIN371 (*PM) |
On request
|
15,02 € with VAT |
M2,5 DIN371 (*PM) |
In stock
(12x)
|
14,35 € with VAT |
M2,6 DIN371 (*PM) |
In stock
(1x)
|
15,02 € with VAT |
M3 DIN371 |
In stock
(119x)
|
8,80 € with VAT |
M3x0,35 DIN371 |
On request
|
33,48 € with VAT |
M3,5 DIN371 |
In stock
(9x)
|
9,90 € with VAT |
M3,5x0,35 DIN371 |
On request
|
33,59 € with VAT |
M4 DIN371 |
In stock
(39x)
|
8,93 € with VAT |
M4x0,5 DIN371 |
In stock
(10x)
|
12,50 € with VAT |
M4,5 DIN371 |
In stock
(4x)
|
14,08 € with VAT |
M4,5x0,5 DIN371 |
In stock
(3x)
|
18,37 € with VAT |
M5 DIN371 |
In stock
(76x)
|
9,38 € with VAT |
M5x0,5 DIN371 |
In stock
(10x)
|
17,67 € with VAT |
M6 DIN371 |
In stock
(44x)
|
9,38 € with VAT |
M6x0,75 DIN371 |
In stock
(3x)
|
13,90 € with VAT |
M6x0,5 DIN371 |
In stock
(7x)
|
13,78 € with VAT |
M6,5x0,75 DIN371 |
In stock
(14x)
|
34,98 € with VAT |
M7 DIN371 |
In stock
(20x)
|
13,33 € with VAT |
M8 DIN371 |
In stock
(66x)
|
10,95 € with VAT |
M8x1,0 DIN371 |
In stock
(9x)
|
14,01 € with VAT |
M8x0,75 DIN371 |
In stock
(5x)
|
14,41 € with VAT |
M8x0,5 DIN371 |
On request
|
31,45 € with VAT |
M9 DIN371 |
In stock
(11x)
|
18,86 € with VAT |
M9x0,75 DIN371 |
On request
|
39,07 € with VAT |
M10 DIN371 |
In stock
(80x)
|
14,00 € with VAT |
M10x1,25 DIN371 |
In stock
(7x)
|
19,67 € with VAT |
M10x1,0 DIN371 |
In stock
(9x)
|
16,53 € with VAT |
M10x0,75 DIN371 |
In stock
(5x)
|
19,76 € with VAT |
M10x0,5 DIN371 |
In stock
(5x)
|
25,05 € with VAT |
M3 DIN376 |
In stock
(14x)
|
10,12 € with VAT |
M4 DIN376 |
In stock
(20x)
|
10,27 € with VAT |
M4x0,5 DIN374 |
In stock
(3x)
|
8,92 € with VAT |
M4,5x0,5 DIN374 |
In stock
(6x)
|
28,44 € with VAT |
M5 DIN376 |
In stock
(16x)
|
10,85 € with VAT |
M5x0,5 DIN374 |
On request
|
28,44 € with VAT |
M6 DIN376 |
In stock
(14x)
|
10,85 € with VAT |
M6x0,75 DIN374 |
In stock
(3x)
|
11,41 € with VAT |
M7x0,75 DIN374 |
On request
|
31,45 € with VAT |
M8x1,5 DIN374 |
In stock
(5x)
|
32,86 € with VAT |
M8 DIN376 |
In stock
(17x)
|
12,63 € with VAT |
M8x1,0 DIN374 |
In stock
(4x)
|
16,11 € with VAT |
M9x1,0 DIN374 |
On request
|
23,38 € with VAT |
M9x0,75 DIN374 |
On request
|
33,93 € with VAT |
M10 DIN376 |
In stock
(6x)
|
15,45 € with VAT |
M10x1,25 DIN374 |
In stock
(4x)
|
20,33 € with VAT |
M10x1,0 DIN374 |
In stock
(2x)
|
18,21 € with VAT |
M10x0,75 DIN374 |
In stock
(2x)
|
21,71 € with VAT |
M10x0,5 DIN374 |
On request
|
36,17 € with VAT |
M11 DIN376 |
In stock
(3x)
|
24,02 € with VAT |
M11x1,0 DIN374 |
On request
|
30,18 € with VAT |
M11x0,75 DIN374 |
On request
|
38,85 € with VAT |
M12 DIN376 |
In stock
(22x)
|
19,88 € with VAT |
M12x1,5 DIN374 |
In stock
(9x)
|
22,35 € with VAT |
M12x1,25 DIN374 |
In stock
(9x)
|
25,41 € with VAT |
M12x1,0 DIN374 |
In stock
(2x)
|
22,35 € with VAT |
M12x0,75 DIN374 |
On request
|
34,56 € with VAT |
M13x1,0 DIN374 |
On request
|
58,94 € with VAT |
M14 DIN376 |
In stock
(7x)
|
27,14 € with VAT |
M14x1,5 DIN374 |
In stock
(2x)
|
30,54 € with VAT |
M14x1,25 DIN374 |
In stock
(4x)
|
27,96 € with VAT |
M14x1,0 DIN374 |
In stock
(4x)
|
30,54 € with VAT |
M15x2,0 DIN374 |
On request
|
68,30 € with VAT |
M14x0,75 DIN374 |
On request
|
58,94 € with VAT |
M15x1,5 DIN374 |
On request
|
39,18 € with VAT |
M15x1,0 DIN374 |
On request
|
37,20 € with VAT |
M16 DIN376 |
In stock
(10x)
|
29,04 € with VAT |
M16x1,5 DIN374 |
In stock
(2x)
|
31,38 € with VAT |
M16x1,25 DIN374 |
In stock
(4x)
|
42,94 € with VAT |
M16x1,0 DIN374 |
In stock
(4x)
|
35,49 € with VAT |
M16x0,75 DIN374 |
On request
|
52,03 € with VAT |
M16x0,5 DIN374 |
In stock
(3x)
|
51,74 € with VAT |
M17x1,0 DIN374 |
On request
|
81,95 € with VAT |
M18 DIN376 |
In stock
(3x)
|
39,86 € with VAT |
M18x2,0 DIN374 |
In stock
(1x)
|
43,03 € with VAT |
M18x1,5 DIN374 |
In stock
(2x)
|
37,36 € with VAT |
M18x1,0 DIN374 |
On request
|
45,39 € with VAT |
M20 DIN376 |
In stock
(5x)
|
42,18 € with VAT |
M20x2,0 DIN374 |
In stock
(3x)
|
55,38 € with VAT |
M20x1,5 DIN374 |
In stock
(4x)
|
43,55 € with VAT |
M20x1,0 DIN374 |
In stock
(3x)
|
47,50 € with VAT |
M20x0,5 DIN374 |
In stock
(1x)
|
102,54 € with VAT |
M22 DIN376 |
In stock
(1x)
|
56,43 € with VAT |
M22x2,0 DIN374 |
On request
|
67,72 € with VAT |
M22x1,5 DIN374 |
In stock
(2x)
|
56,43 € with VAT |
M22x1,0 DIN374 |
On request
|
67,72 € with VAT |
M24 DIN376 |
In stock
(2x)
|
52,26 € with VAT |
M24x2,0 DIN374 |
In stock
(1x)
|
62,70 € with VAT |
M24x1,5 DIN374 |
In stock
(2x)
|
57,46 € with VAT |
M24x1,25 DIN374 |
On request
|
105,46 € with VAT |
M24x1,0 DIN374 |
On request
|
62,73 € with VAT |
M25x2,0 DIN374 |
On request
|
166,68 € with VAT |
M25x1,5 DIN374 |
On request
|
111,94 € with VAT |
M26x1,5 DIN374 |
In stock
(1x)
|
104,86 € with VAT |
M26x1,0 DIN374 |
On request
|
72,25 € with VAT |
M27 DIN376 |
In stock
(2x)
|
69,89 € with VAT |
M27x2,0 DIN374 |
In stock
(1x)
|
83,91 € with VAT |
M27x1,5 DIN374 |
In stock
(2x)
|
77,00 € with VAT |
M27x1,0 DIN374 |
On request
|
119,14 € with VAT |
M28x2,0 DIN374 |
On request
|
123,02 € with VAT |
M28x1,5 DIN374 |
In stock
(4x)
|
80,79 € with VAT |
M28x1,0 DIN374 |
On request
|
127,62 € with VAT |
M30 DIN376 |
In stock
(4x)
|
82,00 € with VAT |
M30x2,0 DIN374 |
On request
|
98,40 € with VAT |
M30x1,5 DIN374 |
In stock
(1x)
|
90,19 € with VAT |
M30x1,0 DIN374 |
In stock
(2x)
|
174,11 € with VAT |
M32x2,0 DIN374 |
On request
|
98,40 € with VAT |
M32x1,5 DIN374 |
In stock
(1x)
|
98,40 € with VAT |
M33 DIN376 |
In stock
(1x)
|
120,62 € with VAT |
M33x2,0 DIN374 |
In stock
(2x)
|
123,86 € with VAT |
M33x1,5 DIN374 |
In stock
(2x)
|
120,62 € with VAT |
M35x1,5 DIN374 |
On request
|
153,05 € with VAT |
M36 DIN376 |
In stock
(2x)
|
163,98 € with VAT |
M36x3,0 DIN374 |
On request
|
168,44 € with VAT |
M36x2,0 DIN374 |
On request
|
198,96 € with VAT |
M36x1,5 DIN374 |
On request
|
163,98 € with VAT |
M38x1,5 DIN374 |
On request
|
183,63 € with VAT |
M39 DIN376 |
On request
|
192,81 € with VAT |
M39x2,0 DIN374 |
On request
|
215,79 € with VAT |
M39x1,5 DIN374 |
On request
|
213,30 € with VAT |
M40x2,0 DIN374 |
On request
|
201,08 € with VAT |
M40x1,5 DIN374 |
On request
|
202,00 € with VAT |
M42 DIN376 |
On request
|
191,88 € with VAT |
M42x3,0 DIN374 |
On request
|
219,26 € with VAT |
M42x2,0 DIN374 |
On request
|
216,17 € with VAT |
M42x1,5 DIN374 |
On request
|
236,65 € with VAT |
M45 DIN376 |
On request
|
191,88 € with VAT |
M45x3,0 DIN374 |
On request
|
219,26 € with VAT |
M45x1,5 DIN374 |
On request
|
230,21 € with VAT |
M48 DIN376 |
On request
|
204,26 € with VAT |
M48x3,0 DIN374 |
On request
|
230,11 € with VAT |
M48x2,0 DIN374 |
On request
|
280,05 € with VAT |
M48x1,5 DIN374 |
On request
|
233,45 € with VAT |
M50x1,5 DIN374 |
In stock
(1x)
|
268,04 € with VAT |
M52 DIN376 |
On request
|
234,52 € with VAT |
M52x2,0 DIN374 |
On request
|
268,05 € with VAT |
M63x1,5 DIN374 |
On request
|
647,47 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 5900920084997
- Brand:
- FANAR
- Warranty:
- 24 months
- Code:
- D2-111101-0104
Product information
Pitch: 1.25, fine
Fitting: ISO2 / 6H - ground thread profile
Standard: DIN 374
Thread start: B, 4 courses - see attached photo
Material l: HSSE( High speed steel 5% Cobalt)
Grinding thread profile
Application:
Structural and carbon steel, low alloy steel , steel castings up to 800N / mm2
Long-cut brass
Free-cutting steel, structural and case-hardened steels
Spherical and malleable cast iron
Non-alloy and low-alloyed copper alloys
Aluminum alloys with Si content <5%
Thermoplastics
FANAR taps with quality correspond to Czech taps N @ rex
Variants
Alternatives
-
Machine tap M10x1.25 HSSE TiN ISO2(6H) DIN374 with chip breaker 800X, FANAR
Machine tap M 10 with chisel blade, straight groove Gradient: 1,25 , fine Tapering: ISO2 / 6H - Cut thread profile DIN 374 Rise Thread: B, 4 steps - See attached photo Material: HSSE (5% Cobalt Rapid Steel) Thread Cut Profile TiN - Titanium Nitride Usage: br> Steel & Stainless Steel Cast Iron Non-ferrous Metal
In stock28,16 € with VAT -
Machine tap M10x1.25 HSSE HL ISO2(6H) DIN374 with chip breaker INOX, FANAR
Machine tap M 10 with chamfer, straight groove Gradient: 1,25 , fine Facing: ISO2 / 6H - Threaded profile DIN 374 Rise Thread: B, 4 Steps - see attached photo Material: HSSE (5% Cobalt Rapid Steel) Cutting Thread Coating: HL (TiAlN Tungsten Carbide) Balinit Hardlube > Use: 2.1: Ferritic and martensitic stainless steel up to 1000N / mm2 2.2: Austenitic corrosion steel up to 850N / mm2 1.3: Structural and carbon steel, low alloy steel, up to 1100N / mm2 1.4: Alloyed steels, tool steel cold drawn to 1000N / mm2 2.3: Heat resistant corrosion-resistant steel up to 1100N / mm2
On request29,75 € with VAT -
Machine tap M10x1.25 HSSE PM-FAN TiAlSiN ISO2(6H) DIN374 with chip breaker, FANAR
Recommended ✓Machine tap( speed cutter) M 10x1,25 with breaker for chips, straight groove 10x1,25 FAN Pitch: 1,25, fine Fitting: ISO2 / 6H - grinding profile thread Standard: DIN 374 Start thread: B, 4 courses - see attached photo Material: HSSE-PM( Quick Cut Steel! Steel 5% Cobalt, production baking) Grinding profile thread Coating: TiAlSiN Application: 1.4: Alloyed steels, tooled steel drawn cold up to 1000N / mm2 1.5: Hardened and hardened ste © steels up to 38 HRC up to 1200N / mm2 2.1: Ferritic and martensitic stainless steel steel up to 1000N / mm2 2.3: Heat resistant corrosion-resistant steel up to 1100N / mm2 3.3: Ball and tempered cast iron up to 700N / mm2 < br> 3.4: Ball and temper ed Â! Cast iron up to 1000N / mm2 1.3: Structural and carbon steel, low-alloyed steel, cast steel up to 1100N / mm2 6.4: Bronze and aluminum up to 1200N / mm2 7.4: Alloys aluminum with silicon content Si> 10%, up to 400N / mm2 8.2: Thermosets and hardened plastics Taps FANAR quality match Czech taps N @ rex, A… â „cada 3580
In stock32,20 € with VAT -
Machine tap M10x1.25 HSSE PM HL ISO2(6HX) DIN374 with chip breaker MasterTap, FANAR
Universal machine tap(quick cut) M 10x1.25 with chip breaker, straight groove Pitch: 1.25, fine Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 374 Thread start: B, 4 courses - see attached photo Materials Â!L: HSSE-PM(High-speed steel 5 wrap, baking production) Grinding thread profile Coating: HL - Balinit HardLube with carbide component(TiAlN WC / C) with hardness 2600 HV Application: Universal - for steels, stainless steels, cast iron, non-ferrous metals and heat-resistant steels, can be used in an emergency on piece  © Cutting threads into hardened steel. Suitable for machining centers, or for older types of numerical and conventional machines with lower power.
On request42,23 € with VAT -
Machine tap M10x1.25 HSSE ISO2 B DIN374 with chip breaker, VOLKEL
Right machine tap, straight groove with chamfer, metric thread Size: M10 x 1,25 / 10x1,25 Gradient: 1,25 Form: B Material: HSSE - High-speed steel 5% cobalt Co5 Usage: Highly workable materials up to 900 N / mm2 Unalloyed and low alloy steels For through holes
On request16,93 € with VAT
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!