Machine tap M10x1.25 HSS 2N DIN374 with chip breaker, CZTOOL
| M3 HSS DIN371 |
In stock
(9x)
|
4,78 € with VAT |
| M3 HSS DIN376 |
In stock
(3x)
|
4,78 € with VAT |
| M3 HSSE DIN371 |
On request
|
5,95 € with VAT |
| M3 HSSE DIN376 |
On request
|
5,95 € with VAT |
| M3x0,35 HSS DIN374 |
On request
|
6,20 € with VAT |
| M3,5 HSS DIN371 |
In stock
(12x)
|
4,83 € with VAT |
| M3,5 HSSE DIN371 |
On request
|
7,55 € with VAT |
| M4 HSS DIN371 |
In stock
(5x)
|
4,83 € with VAT |
| M4 HSS DIN376 |
In stock
(5x)
|
4,83 € with VAT |
| M4 HSSE DIN371 |
On request
|
5,99 € with VAT |
| M4 HSSE DIN376 |
On request
|
6,03 € with VAT |
| M4x0,5 HSS DIN374 |
On request
|
7,88 € with VAT |
| M5 HSS DIN371 |
In stock
(3x)
|
6,03 € with VAT |
| M5 HSS DIN376 |
In stock
(4x)
|
6,03 € with VAT |
| M5 HSSE DIN371 |
On request
|
7,55 € with VAT |
| M5 HSSE DIN376 |
On request
|
7,55 € with VAT |
| M5x0,5 HSS DIN374 |
In stock
(4x)
|
7,88 € with VAT |
| M6 HSS DIN371 |
In stock
(3x)
|
6,35 € with VAT |
| M6 HSS DIN376 |
On request
|
6,51 € with VAT |
| M6 HSSE DIN371 |
On request
|
7,93 € with VAT |
| M6 HSSE DIN376 |
On request
|
8,08 € with VAT |
| M6x0,75 HSS DIN374 |
On request
|
7,88 € with VAT |
| M6x0,5 HSS DIN374 |
In stock
(5x)
|
7,88 € with VAT |
| M8 HSS DIN371 |
In stock
(5x)
|
7,44 € with VAT |
| M8 HSS DIN376 |
In stock
(5x)
|
7,44 € with VAT |
| M8 HSSE DIN371 |
On request
|
9,16 € with VAT |
| M8 HSSE DIN376 |
On request
|
9,16 € with VAT |
| M8x1,0 HSS DIN374 |
On request
|
9,57 € with VAT |
| M8x0,75 HSS DIN374 |
On request
|
9,57 € with VAT |
| M10 HSS DIN371 |
On request
|
9,16 € with VAT |
| M10 HSS DIN376 |
In stock
(5x)
|
10,25 € with VAT |
| M10 HSSE DIN371 |
On request
|
12,14 € with VAT |
| M10 HSSE DIN376 |
On request
|
12,86 € with VAT |
| M10x1,25 HSS DIN374 |
On request
|
11,86 € with VAT |
| M10x1,0 HSS DIN374 |
On request
|
11,86 € with VAT |
| M10x0,75 HSS DIN374 |
On request
|
11,86 € with VAT |
| M12 HSS DIN376 |
In stock
(5x)
|
13,75 € with VAT |
| M12 HSSE DIN376 |
On request
|
16,96 € with VAT |
| M12x1,5 HSS DIN374 |
On request
|
14,83 € with VAT |
| M12x1,25 HSS DIN374 |
On request
|
14,83 € with VAT |
| M12x1,0 HSS DIN374 |
On request
|
14,83 € with VAT |
| M14 HSS DIN376 |
On request
|
20,42 € with VAT |
| M14 HSSE DIN376 |
On request
|
22,87 € with VAT |
| M14x1,5 HSS DIN374 |
On request
|
21,71 € with VAT |
| M14x1,25 HSS DIN374 |
On request
|
21,71 € with VAT |
| M14x1,0 HSS DIN374 |
On request
|
21,71 € with VAT |
| M16 HSS DIN376 |
On request
|
24,68 € with VAT |
| M16 HSSE DIN376 |
On request
|
27,25 € with VAT |
| M16x1,5 HSS DIN374 |
On request
|
26,24 € with VAT |
| M16x1,0 HSS DIN374 |
On request
|
26,24 € with VAT |
| M18 HSS DIN376 |
On request
|
35,30 € with VAT |
| M18 HSSE DIN376 |
On request
|
38,07 € with VAT |
| M18x1,5 HSS DIN374 |
On request
|
31,19 € with VAT |
| M18x1,0 HSS DIN374 |
On request
|
31,19 € with VAT |
| M20 HSS DIN376 |
On request
|
39,80 € with VAT |
| M20 HSSE DIN376 |
On request
|
41,32 € with VAT |
| M20x1,5 HSS DIN374 |
On request
|
40,89 € with VAT |
| M20x1,0 HSS DIN374 |
On request
|
40,89 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000014099
- Brand:
- CZTOOL
- Warranty:
- 24 months
- Code:
- 108101
Product information
Gradient: 1,25, fine
Face: 2N
Rolled thread profile
DIN 374 (Thin shank)
Material: HSS - High-Speed ??Steel
Usage:
Non-alloy steels up to 600 N / mm2
Soft materials (brass, copper, aluminum) > Rolled taps with 2N medium tolerance are suitable for standard screw connections - no thread tolerance requirements.
Thread pulling
Variants
Alternatives
-
Machine tap M10x1.25 HSSE ISO2 B DIN374 with chip breaker, VOLKEL
Right machine tap, straight groove with chamfer, metric thread Size: M10 x 1,25 / 10x1,25 Gradient: 1,25 Form: B Material: HSSE - High-speed steel 5% cobalt Co5 Usage: Highly workable materials up to 900 N / mm2 Unalloyed and low alloy steels For through holes
On request16,93 € with VAT -
Machine tap M10x1.25 HSSE TiN ISO2(6H) DIN374 with chip breaker 800X, FANAR
Machine tap M 10 with chisel blade, straight groove Gradient: 1,25 , fine Tapering: ISO2 / 6H - Cut thread profile DIN 374 Rise Thread: B, 4 steps - See attached photo Material: HSSE (5% Cobalt Rapid Steel) Thread Cut Profile TiN - Titanium Nitride Usage: br> Steel & Stainless Steel Cast Iron Non-ferrous Metal
In stock28,17 € with VAT -
Machine tap M10x1.25 HSSE PM-FAN TiAlSiN ISO2(6H) DIN374 with chip breaker, FANAR
Recommended ✓Machine tap( speed cutter) M 10x1,25 with breaker for chips, straight groove 10x1,25 FAN Pitch: 1,25, fine Fitting: ISO2 / 6H - grinding profile thread Standard: DIN 374 Start thread: B, 4 courses - see attached photo Material: HSSE-PM( Quick Cut Steel! Steel 5% Cobalt, production baking) Grinding profile thread Coating: TiAlSiN Application: 1.4: Alloyed steels, tooled steel drawn cold up to 1000N / mm2 1.5: Hardened and hardened ste © steels up to 38 HRC up to 1200N / mm2 2.1: Ferritic and martensitic stainless steel steel up to 1000N / mm2 2.3: Heat resistant corrosion-resistant steel up to 1100N / mm2 3.3: Ball and tempered cast iron up to 700N / mm2 < br> 3.4: Ball and temper ed Â! Cast iron up to 1000N / mm2 1.3: Structural and carbon steel, low-alloyed steel, cast steel up to 1100N / mm2 6.4: Bronze and aluminum up to 1200N / mm2 7.4: Alloys aluminum with silicon content Si> 10%, up to 400N / mm2 8.2: Thermosets and hardened plastics Taps FANAR quality match Czech taps N @ rex, A… â „cada 3580
In stock32,20 € with VAT -
Machine tap M10x1.25 HSSE HL ISO2(6H) DIN374 with chip breaker INOX, FANAR
Machine tap M 10 with chamfer, straight groove Gradient: 1,25 , fine Facing: ISO2 / 6H - Threaded profile DIN 374 Rise Thread: B, 4 Steps - see attached photo Material: HSSE (5% Cobalt Rapid Steel) Cutting Thread Coating: HL (TiAlN Tungsten Carbide) Balinit Hardlube > Use: 2.1: Ferritic and martensitic stainless steel up to 1000N / mm2 2.2: Austenitic corrosion steel up to 850N / mm2 1.3: Structural and carbon steel, low alloy steel, up to 1100N / mm2 1.4: Alloyed steels, tool steel cold drawn to 1000N / mm2 2.3: Heat resistant corrosion-resistant steel up to 1100N / mm2
On request29,77 € with VAT -
Machine tap M10x1.25 HSSE PM HL ISO2(6HX) DIN374 with chip breaker MasterTap, FANAR
Universal machine tap(quick cut) M 10x1.25 with chip breaker, straight groove Pitch: 1.25, fine Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 374 Thread start: B, 4 courses - see attached photo Materials Â!L: HSSE-PM(High-speed steel 5 wrap, baking production) Grinding thread profile Coating: HL - Balinit HardLube with carbide component(TiAlN WC / C) with hardness 2600 HV Application: Universal - for steels, stainless steels, cast iron, non-ferrous metals and heat-resistant steels, can be used in an emergency on piece  © Cutting threads into hardened steel. Suitable for machining centers, or for older types of numerical and conventional machines with lower power.
On request42,23 € with VAT -
Machine tap M10x1.25 HSSE ISO2(6H) DIN374 with chip breaker, FANAR
Machine tap( speed cutter 29 M 10x1.25 with chip breaker, straight groove Pitch: 1.25, fine Fitting: ISO2 / 6H - ground thread profile Standard: DIN 374 Thread start: B, 4 courses - see attached photo Material l: HSSE( High speed steel 5% Cobalt) Grinding thread profile Application: Structural and carbon steel, low alloy steel , steel castings up to 800N / mm2 Long-cut brass Free-cutting steel, structural and case-hardened steels Spherical and malleable cast iron Non-alloy and low-alloyed copper alloys Aluminum alloys with Si content
In stock20,33 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!