Machine tap M - HSSE-PM HL MasterTap ISO2C (6HX) spiral (45°), FANAR
| M1 DIN371 (ISO1/4H) |
On request
|
51,38 € with VAT |
| M1,1 DIN371 (ISO1/4H) |
On request
|
51,38 € with VAT |
| M1,2 DIN371 (ISO1/4H) |
On request
|
51,38 € with VAT |
| M1,4 DIN371 (ISO1/4H) |
On request
|
51,38 € with VAT |
| M1,6 DIN371 (ISO2/6H) |
On request
|
45,81 € with VAT |
| M2 DIN371 (ISO2/6H) |
On request
|
22,58 € with VAT |
| M2,3 DIN371 (ISO2/6H) |
On request
|
23,44 € with VAT |
| M2,5 DIN371 (ISO2/6H) |
On request
|
22,58 € with VAT |
| M2,6 DIN371 (ISO2/6H) |
On request
|
22,58 € with VAT |
| M3 DIN371 |
On request
|
17,46 € with VAT |
| M3x0,35 DIN371 |
On request
|
59,47 € with VAT |
| M3,5 DIN371 |
In stock
(2x)
|
19,77 € with VAT |
| M3,5x0,35 DIN371 |
On request
|
58,19 € with VAT |
| M4x0,5 DIN371 |
On request
|
24,19 € with VAT |
| M4,5 DIN371 |
In stock
(4x)
|
24,07 € with VAT |
| M5 DIN371 |
In stock
(6x)
|
19,98 € with VAT |
| M5x0,5 DIN371 |
In stock
(1x)
|
33,82 € with VAT |
| M6x0,5 DIN371 |
On request
|
27,04 € with VAT |
| M6x0,75 DIN371 |
In stock
(4x)
|
26,33 € with VAT |
| M7 DIN371 |
In stock
(6x)
|
24,54 € with VAT |
| M8 DIN371 |
In stock
(8x)
|
24,85 € with VAT |
| M8x0,75 DIN371 |
On request
|
28,62 € with VAT |
| M8x1,0 DIN371 |
On request
|
34,32 € with VAT |
| M9 DIN371 |
On request
|
31,23 € with VAT |
| M10 DIN371 |
In stock
(5x)
|
32,65 € with VAT |
| M10x1,25 DIN371 |
On request
|
38,97 € with VAT |
| M10x1,0 DIN371 |
On request
|
35,55 € with VAT |
| M10x0,75 DIN371 |
On request
|
39,54 € with VAT |
| M3 DIN376 |
On request
|
22,39 € with VAT |
| M4 DIN376 |
On request
|
23,57 € with VAT |
| M5 DIN376 |
On request
|
25,65 € with VAT |
| M6 DIN376 |
In stock
(19x)
|
25,65 € with VAT |
| M8 DIN376 |
On request
|
27,62 € with VAT |
| M8x1,0 DIN374 |
In stock
(1x)
|
34,32 € with VAT |
| M10x1,25 DIN374 |
In stock
(3x)
|
46,89 € with VAT |
| M10x1,0 DIN374 |
On request
|
45,10 € with VAT |
| M10x0,75 DIN374 |
On request
|
40,57 € with VAT |
| M12x1,25 DIN374 |
On request
|
62,15 € with VAT |
| M12x1,0 DIN374 |
On request
|
45,93 € with VAT |
| M14 DIN376 |
In stock
(3x)
|
63,14 € with VAT |
| M14x1,5 DIN374 |
On request
|
74,67 € with VAT |
| M16 DIN376 |
In stock
(1x)
|
67,87 € with VAT |
| M16x1,5 DIN374 |
On request
|
66,36 € with VAT |
| M16x1,0 DIN374 |
On request
|
73,58 € with VAT |
| M18 DIN376 |
On request
|
84,39 € with VAT |
| M18x1,5 DIN374 |
In stock
(2x)
|
91,27 € with VAT |
| M20 DIN376 |
In stock
(2x)
|
100,71 € with VAT |
| M20x1,5 DIN374 |
On request
|
104,14 € with VAT |
| M22 DIN376 |
On request
|
124,88 € with VAT |
| M22x1,5 DIN374 |
On request
|
131,15 € with VAT |
| M24 DIN376 |
On request
|
122,77 € with VAT |
| M24x1,5 DIN374 |
On request
|
142,30 € with VAT |
| M27 DIN376 |
In stock
(1x)
|
161,40 € with VAT |
| M30 DIN376 |
In stock
(1x)
|
189,68 € with VAT |
| M33 DIN376 |
On request
|
286,43 € with VAT |
| M36 DIN376 |
On request
|
385,97 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- Brand:
- FANAR
- Warranty:
- 24 months
Product information
Fitting: ISO2 (6HX)
Thread start: C, 2 courses - see attached photo
Material: HSSE-PM (High-speed steel + 5% Cobalt, production by sintering)
Coating : HL - Balinit HardLube with carbide component (TiAlN + WC / C) with hardness 2600 HV
Helix angle: 45°
Grounded thread profile
Standard: DIN 371, DIN374, DIN376
Usage :
Universal - for steels, stainless steels, cast iron, non-ferrous metals and heat-resistant steels, can be used in emergencies and for piece cutting of threads in hardened steel.
Suitable for machining centers, possibly also for older types of numerical and conventional machines with lower performance.
Variants
Alternatives
-
Machine tap M - HSSE-PM TS 1400-HT TiAlSiN ISO2 spiral (15 °), FANAR
Machine tap with spiral groove, type PM TS Fitting: ISO2 (6H) Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN Helix angle: 15 ° Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2 1.6: Alloys of steel and hardened steel up to 44 HRC 3.1: Gray cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6: Brass (copper-zinc steels with short chips) 4.9: Copper alloys with short chips
from 14,75 € with VAT -
Machine tap M - HSSE-PM TiAlSiN ISO2(6H) spiral (40°), FANAR
Machine tap with spiral groove Fitting: ISO2 (6H) Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN Helix angle: 40 ° Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 1.4: Alloy steels, cold drawn tool steel up to 1000N / mm2 1.5: Hardened and hardened steels up to 38 HRC up to 1200N / mm2 2.1: Ferritic and martensitic stainless steels up to 1000N / mm2 2.3: Refractory stainless steel up to 1100N / mm2 3.3: Ball and malleable cast iron up to 700N / mm2 3.4: Ball and malleable cast iron up to 1000N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 6.4: Bronze and aluminum up to 1200N / mm2 7.4: Aluminum alloys with a silicon content of> 10%, up to 400 N / mm2 8.2: Thermosets and hardened plastics
from 13,83 € with VAT -
Machine tap M - HSSE-PM 1400 TiAlSiN ISO2(6H) spiral, FANAR
Machine tap with spiral groove, type PMS Fitting: ISO2 (6H) Material: HSSE-PM (High speed steel + 5% Cobalt, sintering) Coating: TiAlSiN Helix angle: 15° Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2 1.6: Alloys of steel and hardened steel up to 44 HRC 3.1: Gray cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6: Brass (copper-zinc steels with short chips) 4.9: Copper alloys with short chips
from 14,82 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!