Machine tap M - HSSE-PM 1400 TiAlSiN ISO2(6HX), FANAR
| M4 DIN371 |
On request
|
11,89 € with VAT |
| M6 DIN371 |
In stock
(1x)
|
13,35 € with VAT |
| M8x1,0 DIN371 |
On request
|
20,63 € with VAT |
| M10 DIN371 |
In stock
(1x)
|
25,41 € with VAT |
| M10x1,25 DIN371 |
On request
|
23,20 € with VAT |
| M10x1,0 DIN371 |
In stock
(2x)
|
23,22 € with VAT |
| M8x1,0 DIN374 |
On request
|
19,51 € with VAT |
| M10 DIN376 |
On request
|
23,43 € with VAT |
| M10x1,0 DIN374 |
On request
|
22,78 € with VAT |
| M12 DIN376 |
On request
|
31,52 € with VAT |
| M12x1,5 DIN374 |
On request
|
36,37 € with VAT |
| M12x1,0 DIN374 |
On request
|
32,16 € with VAT |
| M14 DIN376 |
On request
|
43,72 € with VAT |
| M14x1,5 DIN374 |
On request
|
50,86 € with VAT |
| M16 DIN376 |
On request
|
45,16 € with VAT |
| M16x1,5 DIN374 |
On request
|
50,63 € with VAT |
| M16x1,0 DIN374 |
On request
|
52,30 € with VAT |
| M18 DIN376 |
On request
|
55,96 € with VAT |
| M18x2,0 DIN374 |
On request
|
67,08 € with VAT |
| M18x1,5 DIN374 |
On request
|
53,95 € with VAT |
| M20 DIN376 |
On request
|
70,26 € with VAT |
| M20x1,5 DIN374 |
On request
|
72,07 € with VAT |
| M24 DIN376 |
On request
|
112,24 € with VAT |
| M30 DIN376 |
On request
|
145,09 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- Brand:
- FANAR
- Warranty:
- 24 months
Product information
Fitting: ISO2 (6HX)
Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production)
Coating: TiAlSiN
Ground thread profile
Standard: DIN 371, DIN374, DIN376
Usage:
1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2
1.6: Alloys of steel and hardened steel up to 44 HRC
3.1: Gray cast iron
3.3: Ball and malleable cast iron up to 700N / mm2
4.6: Brass (copper-zinc steels with short chips)
4.9: Copper alloys with short chips
Variants
Alternatives
-
Machine tap M - HSSE-PM TS 1400 TiAlSiN ISO2(6HX) with chip breaker, FANAR
Machine tap with straight groove and chip breaker, made of sintered steel, type PM TS Fitting: ISO2 (6HX) Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2 1.6: Alloys of steel and hardened steel up to 44 HRC 3.1: Gray cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6: Brass (copper-zinc steels with short chips) 4.9: Copper alloys with short chips
from 13,90 € with VAT -
Machine tap M - HSSE-PM TS 1400-HT TiAlSiN ISO2 spiral (15 °), FANAR
Machine tap with spiral groove, type PM TS Fitting: ISO2 (6H) Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN Helix angle: 15 ° Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2 1.6: Alloys of steel and hardened steel up to 44 HRC 3.1: Gray cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6: Brass (copper-zinc steels with short chips) 4.9: Copper alloys with short chips
from 14,77 € with VAT -
Machine tap M - HSSE-PM 1400 TiAlSiN ISO2(6HX) with chip breaker, FANAR
Machine tap with straight groove and chip breaker, made of sintered steel Fitting: ISO2 (6HX) Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2 1.6: Alloys of steel and hardened steel up to 44 HRC 3.1: Gray cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6: Brass (copper-zinc steels with short chips) 4.9: Copper alloys with short chips
from 17,40 € with VAT -
Machine tap M - HSSE-PM 1400-HT TiAlSiN ISO2 (6HX), FANAR
Machine tap with straight groove, made of sintered steel, type PM TS 1400 HT TC Fitting: ISO2 (6HX) Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2 1.6: Alloys of steel and hardened steel up to 44 HRC 3.1: Gray cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6: Brass (copper-zinc steels with short chips) 4.9: Copper alloys with short chips
from 12,73 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!