Machine (fast cutting)

Machine spiral tap M 22x2,5 Size: M22x2,5 Gradient: 2,5, basic Facing: ISO1 / 4H - Threaded profile DIN 376 C Thread start: C, 2 steps - see attached photo Material: HSS (High-Speed ??Steel) Coating: uncoated Helix angle: 15 °

Machine spiral tap M 22x2,5 Size: M22x2,5 Gradient: 2,5, basic Facing: ISO1 / 4H - Threaded profile DIN 376 C Thread start: C, 2 steps - see attached photo Material: HSSE (High-speed steel 5% Co) Coating: uncoated Helix angle: 40 °

Machine spiral tap M 24x3,0 Size: M24x3,0 Gradient: 3,0, basic Facing: ISO1 / 4H - Cut thread profile DIN 376 C Thread start: C, 2 steps - see attached photo Material: HSS (High-speed steel) Coating: uncoated Helix angle: 40 °

Machine spiral tap M 24x1 Size: M24x1,0 Gradient: 1,0, Fine Face: ISO1 / 4H - Cut Thread DIN 374 C < br> Thread start: C, 2 steps - see attached photo Material: HSS - High-speed steel Coating: uncoated Helix angle: 40 °

15mm, Width 6mm Slot Pitch 0.5mm Hole Diameter 6mm Wheels made of this set have opposite sloping grooves, so a combination of these two wheels will be formed in the shape of a grid Czech ČSN 227155 a ČSN 227156

Wheels made of this set have opposite sloping grooves, two wheels will be formed in the shape of a grid Czech ČSN 227155 a ČSN 227156

Calibr. - Calibration Limit Ring with Exact Size 49.9990mm DIN 2250

Caliber - Limit Calibration Ring, Accurate Size 59.9995mm DIN 2250

This self-centering punch is suitable for center marking in holes with a diameter of 7 - 16mm Marking needle has a diameter of 5mm

Velcro polishing pad with a diameter of 115 mm

55mm

Wooden Gripping Stick 75mm Gripping Diameter 75mm