Machine drills

KA35 math drill with double guide, including sensor. Clamping: Weldon 3/4 "(19,05mm) Working range(drill diameter): 12-35mm Drilling depth: 210mm Stroke: 120-210mm Speed: 450 rpm Cooling: yes, internal Clamping force: 1000kg Magnetic base: 80 x 168mm, fixed Power: 1100W Total height: 370-550mm Total height: 275mm Base height: 125mm Power supply: 230V Thanks to the double guide - the rail is achieved much higher stability and drilling accuracy.The drilled holes are more accurate, the surface is smoother and the tools are used thanks to will last longer.

KA38 math drill with double guide, including sensor. Clamping: Weldon 3/4 "(19,05mm) Working range(drill diameter): 12-38mm Drilling depth: 110mm Stroke: 170mm Speed : 450 rpm Cooling: yes, internal Clamping force: 1100kg Magnetic base: 85 x 170mm, fixed Power: 1100W Total height: 320-490mm Total height: 280mm Base height: 125mm Power supply: 230V Thanks to the double guide - the rail is achieved much higher stability and drilling accuracy.The drilled holes are more accurate, the surface is smoother and the tools used thanks to the durability of the drill. Built-in sensor checks the attachment of the magnetic drill to the base, in case of release it shuts down the motor. rusty pedestal, clips, insufficient pedestal force(below 6mm), possibly lights up even at too high feed. Green light indicates magnetic force is sufficient For example, the base is firmly attached to the base and the drill can be used safely.

KA40 math drill with double guide, including sensor. Clamping: Weldon 3/4 "(19,05mm) Working range(drill diameter): 12-40mm Drilling depth: 110mm Stroke: 170mm Speed : 450 rpm Cooling: yes, internal Clamping force: 1100kg Magnetic base: 85 x 170mm, fixed Power: 1100W Total height: 330-510mm Total height: 280mm Base height: 120mm Power supply: 230V Thanks to the double guide - the rail is achieved much higher stability and drilling accuracy.The drilled holes are more accurate, the surface is smoother and the tools used thanks to the durability of the drill. Built-in sensor checks the attachment of the magnetic drill to the base, in case of release it shuts down the motor. rusty pedestal, clips, insufficient pedestal force(below 6mm), or it lights up even at too high a feed. The green light indicates that the magnetic force is is sufficient For example, the base is firmly attached to the base and the drill can be used safely.

KAS40 matting drill with double guide, including sensor. Clamping: Weldon 3/4 "(19,05mm) Working range(drill diameter): 12-40mm Drilling depth: 110mm Stroke: 180mm Speed : 450 rpm Cooling: yes, internal Clamping force: 1100kg Magnetic base: 85 x 170mm, rotatable by 360 Â ° Power: 1100W Total height: 340-520mm Total height: 280mm Base height: 120mm Power supply: 230V Thanks to the double guide - the rail is achieved much higher stability and drilling accuracy.The drilled holes are more accurate, the surface is smoother and more used fastening - ie rusty base, clips, insufficient strength of the base(below 6 mm), or it may light up even at too high feed. Green indicator light indicates that the magnetic force j If sufficient, the base is firmly attached to the base and the drill can be used safely.

KA50 math drill with double guide, including sensor. Clamping: taper MK2 holder Weldon 3/4 "(19,05mm) Working range(drill diameter): 12-50mm Drilling depth: 110mm Stroke: 180mm < br> Speed: 250 rpm and 450 rpm Cooling: yes, internal Clamping force: 1250kg Magnetic base: 85 x 180mm, fixed Power: 1150W Total height: 420-560mm Total height: 280mm Base height: 120mm Voltage Power: 230V Thanks to the double line - the rail is achieved much higher stability and drilling accuracy. , the surface is smoother. The built-in sensor checks the attachment of the magnetic drill to the base, in case of loosening it switches off the motor The red light indicates insufficient fastening - ie rusty base, clips , insufficient base force(below 6 mm), or it may light up at very high feed. Green light indicates That the magnetic force is sufficient, the base is firmly connected to the base and the drill can be used safely.

KAS50 math drill with double guide, including sensor. Clamping: taper MK2 holder Weldon 3/4 "(19,05mm) Working range(drill diameter): 12-50mm Drilling depth: 110mm Stroke: 180mm < br> Speed: 250 rpm and 450 rpm Cooling: yes, internal Clamping force: 1250kg Magnetic base: 85 x 180mm, rotatable through 360 Â ° Power: 1150W Total height : 430-570mm Total height: 280mm Base height: 120mm Power supply: 230V Thanks to the double guide - the rail is achieved much higher stability and drilling portability.The drilled holes are more accurate, the surface is smoother and the tools used make it last longer. The built-in sensor checks the attachment of the magnetic drill to the base, in case of loosening. insufficient fastening - ie rusty base, buckles, insufficient base force(below 6 mm), or lights up even if it is too high. scroll © m scroll. Green light with ignores that the magnetic force is sufficient, the base is fi rmly connected to the base and the drill can be used safely.

KATV55 matting drill with double guided spindle sensor. Clamping: taper MK2 holder Weldon 3/4 "(19.05mm) Working range(drill diameter): 12-55mm Working range(A… â„ c Thread cutting): M6-M20 Drilling depth: 110mm Stroke: 170mm Speed: 100-250 rpm and 180-450 rpm, right left-hand drive Cooling: yes, internal Clamping force: 1250kg Magnetic base: 85 x 180mm, fixed Power: 1250W Total height: 420-560mm Total width: 280mm Base height: 120mm Power supply: 230V Suitable for cutting threads M6-M20 Thanks to the double guide - the rail is achieved much higher stability and drilling portability The drilled holes are more accurate, the surface is smoother The built-in sensor checks the attachment of the magnetic drill to the base, in case of loosening it switches off the motor. Red light indicates insufficient fastening - ie rusty base, clips, insufficient the initial force of the base(below 6mm) , it may light up even at too high a feed. The green light indicates that the magnetic force is sufficient, the base is firmly attached to the base and the drill can be used safely.

KATSV55 math drill with double guided spindle sensor. Clamping: taper MK2 holder Weldon 3/4 "(19.05mm) Working range(drill diameter): 12-55mm Working range(A… â„ c Thread cutting): M6-M20 Drilling depth: 110mm Stroke: 195mm Speed: 100-250 rpm and 180-450 rpm, right left-hand drive Cooling: yes, internal Clamping force: 1250kg Magnetic base: 85 x 180mm, rotatable through 360 Â °, displaceable by 16mm on both sides Power: 1250W Total height: 430-570mm Total height: 280mm Base height : 120mm Power supply: 230V Suitable for cutting M6-M20 threads Thanks to the double guide - the rail achieves much higher stability and drilling accuracy. the surface is smoother and the tools used make it last longer. The built-in sensor checks the attachment of the magnetic drill to the base., in the event of a release, shuts off the engine. ie rusty pedestal, clips, insufficient pedestal strength(belo w 6mm), possibly lights up even at too high feed. The green light indicates that the magnetic force is sufficient, the base is firmly attached to the base and the drill can be used safely.

KA100 math drill with double guide, including sensor. Clamping: taper MK3 holder Weldon 3/4 "(19,05mm) Working range(eg drill): 12-100mm Working range(reaming) nAf :: 6 -32mm Drilling depth: 240mm Stroke: 255mm Speed: 110 rpm, 170 rpm, 245 rpm and 385 rpm Cooling: yes, internal Clamping force: 2050kg Magnetic base: 102 x 212mm, fixed Power: 1700W Total height: 480-690mm Overall width: 340mm Base height: 130mm Power supply: 230V Thanks to the double guide - the rail is achieved much higher stability Drilling holes are more accurate, the surface is smoother and the tools used make it last longer. The built-in sensor checks the mounting. base, in case of loosening it shuts down the motor.(below 6mm), if necessary lights up when the feed is too high. The green light indicates that the magnetic force is sufficient, the base is firmly attached to the base and the drill can be used safely.

KAS100 math drill with double guide, including sensor. Clamping: taper MK3 holder Weldon 3/4 "(19,05mm) Working range(eg drill): 12-100mm Working range(reaming) nAf :: 6 -32mm Drilling depth: 240mm Stroke: 295mm Speed: 110 rpm, 170 rpm, 245 rpm and 385 rpm Cooling: yes, internal Clamping force: 2050kg Magnetic base: 102 x 212mm, rotatable by 360 Â °, movable by 22mm on both sides Power: 1700W Total height: 530-740mm Total height: 340mm Base height: 130mm Power supply: 230V Thanks double Driven holes are more accurate, the surface is smoother and the tools used make it last longer. Built-in sensor checks the attachment of the magnetic drill to the base, in case of release it shuts down the motor.Red light indicates insufficient attachment - ie rusty pedestal, clips, insufficient the new force of the base(below 6 mm), it may light up at too high a feed. The green light indicates that the magnetic force is sufficient, the base is firmly attached to the base and the drill can be used safely.

KATV100 math drill with double guide, including sensor. Clamping: taper MK3 holder Weldon 3/4 "(19,05mm) Working range(drill diameter): 12-100mm Working range(A… â„ c Thread cutting: M6 -M32 Working range(reaming): 6-32mm Drilling depth: 220mm Stroke: 255mm Speed: 60-140 rpm and 200-470 rpm, right left-hand drive Cooling: yes, internal Clamping force: 2050kg Magnetic base: 85 x 180mm, fixed Power: 1800W Total height: 480-690mm Total height: 340mm Base height: 130mm Power supply: 230V Thanks to the double guide - the rail is achieved much higher stability and drilling accuracy.The drilled holes are more accurate, the surface is smoother and the tools are used thanks to Built-in sensor checks the attachment of the magnetic drill to the base, in case of loosening it shuts down the motor. fastening - ie rusty base, clips, not the initial force of the base(below 6mm ), it may light up even at too high a feed. The green li ght indicates that the magnetic force is sufficient, the base is firmly attached to the base and the drill can be used safely.

KATV100 math drill with double guide, including sensor. Clamping: taper MK3 holder Weldon 3/4 "(19,05mm) Working range(drill diameter): 12-100mm Working range(A… â„ c Thread cutting: M6 -M32 Working range(reaming): 6-32mm Drilling depth: 240mm Stroke: 295mm Speed: 60-140 rpm and 200-470 rpm, right left-hand drive Cooling: yes, internal Clamping force: 2050kg Magnetic base: 85 x 180mm, swivel 360 Â °, slidable by 22mm on both sides Power: 1800W Total height: 510-720mm < br> Total height: 340mm Pedestal height: 130mm Power supply: 230V Thanks to the double line - the rail is achieved far higher stability and drilling portability.The drilled holes are more accurate A , the surface is smoother and the tools used make it last longer. The built-in sensor checks the attachment of the magnetic drill to the base, in the case of loose The red light indicates insufficient upe exterior - ie rusty pedestal, clips, insufficient pedestal strength(below 6mm), possibly lights up even at too high feed. The green light indicates that the magnetic force is sufficient, the base is firmly attached to the base and the drill can be used safely.