Lubricants and cutting oils

Paste cutting, thread cutting, boring and boring operations Special high-performance water-soluble paste Application on tool: - in undiluted state - can be diluted up to a ratio of 1: 4 with water < br> Packing 1000g

Paste cutting, thread cutting, boring and boring operations Special high-performance water-soluble paste Application on tool: - in undiluted state - can be diluted up to a ratio of 1: 4 with water < Packaging: 30l barrel

Paste cutting, thread cutting, boring and boring operations Special high-performance water-soluble paste Application on tool: - in undiluted state - can be diluted up to a ratio of 1: 4 with water < br> Packing 5000g

DW11 is a grease and grease trap remover a clear grease, grease and oil remover for industrial use. Very strong and fast drying product. It can be used safely on both stainless metal, galvanized, enamelled or aluminum surfaces. Apart from laziness, it has no dangerous properties. Applications: 1. Apply the product on a clean cloth(preferably cotton) and re-apply it at the application site. If necessary, repeat the procedure several times until surface perfectly cleaned. 2. Shiny marks must not remain on the surface after application. Package: 200ml in plastic container(non-original packaging)

DW11 is a grease and grease trap remover a clear grease, grease and oil remover for industrial use. Very strong and fast drying product. It can be used safely on both stainless metal, galvanized, enamelled or aluminum surfaces. Apart from laziness, it has no dangerous properties. Applications: 1. Apply the product on a clean cloth(preferably cotton) and re-apply it at the application site. If necessary, repeat the procedure several times until surface perfectly cleaned. 2. Shiny marks must not remain on the surface after application. Packaging: 0.5 liter in a plastic container(non-original packaging)

DW11 is a grease and grease trap remover a clear grease, grease and oil remover for industrial use. Very strong and fast drying product. It can be used safely on both stainless metal, galvanized, enamelled or aluminum surfaces. Apart from laziness, it has no dangerous properties. Applications: 1. Apply the product on a clean cloth(preferably cotton) and re-apply it at the application site. If necessary, repeat the procedure several times until surface perfectly cleaned. 2. Shiny marks must not remain on the surface after application. Packaging: 1 liter in plastic container(non-original packaging)

DW11 is a grease and grease trap remover a clear grease, grease and oil remover for industrial use. Very strong and fast drying product. It can be used safely on both stainless metal, galvanized, enamelled or aluminum surfaces. Apart from laziness, it has no dangerous properties. Applications: 1. Apply the product on a clean cloth(preferably cotton) and re-apply it at the application site. If necessary, repeat the procedure several times until surface perfectly cleaned. 2. Shiny marks must not remain on the surface after application. Packaging: 5 liters in plastic container(original packaging)

Type: HM 46 - hydraulics in normal conditions (year-round operation) Volume: 1 liter - poured from a barrel Packaging: In a plastic container with a lid Replacement for Paramo Mogul HM-46 General characteristics: Hydraulic oils are intended for use in highly loaded hydraulic systems of industrial machines and equipment, in construction, transport, agriculture, etc. Usage: Hydraulic oils are intended for power transmission in hydrostatic systems and for driving hydraulic devices, i.e. in hydraulic transmissions, control and regulation mechanisms and in other devices that work in severe working conditions (pressure up to 25 MPa in gear pumps and up to 35 MPa in piston pumps, increased ambient temperature and humidity. Standards, specifications: DIN51 524 part 2 - HLP, ISO 11 158 HM For other parameters, see the attached technical and safety sheet.

Type: HM 46 - hydraulics in usual conditions (year-round operation) Volume: 5 liters - poured from a barrel Packaging: In a plastic canister with a lid Replacement for Paramo Mogul HM-46 General characteristics: Hydraulic oils are intended for use in highly loaded hydraulic systems of industrial machines and equipment, in construction, transport, agriculture, etc. Usage: Hydraulic oils are intended for power transmission in hydrostatic systems and for driving hydraulic devices, i.e. in hydraulic transmissions, control and regulation mechanisms and in other devices that work in severe working conditions (pressure up to 25 MPa in gear pumps and up to 35 MPa in piston pumps, increased ambient temperature and humidity. Standards, specifications: DIN51 524 part 2 - HLP, ISO 11 158 HM For other parameters, see the attached technical and safety sheet.

Type: HM 46 - hydraulics in usual conditions (year-round operation) Volume: 10 liters - poured from a barrel Packaging: In a plastic canister with a lid Replacement for Paramo Mogul HM-46 General characteristics: Hydraulic oils are intended for use in highly loaded hydraulic systems of industrial machines and equipment, in construction, transport, agriculture, etc. Usage: Hydraulic oils are intended for power transmission in hydrostatic systems and for driving hydraulic devices, i.e. in hydraulic transmissions, control and regulation mechanisms and in other devices that work in severe working conditions (pressure up to 25 MPa in gear pumps and up to 35 MPa in piston pumps, increased ambient temperature and humidity. Standards, specifications: DIN51 524 part 2 - HLP, ISO 11 158 HM For other parameters, see the attached technical and safety sheet.

Castrol Hysol T15 Liquid Concentrate - Castrol Hysol T15 is a multipurpose machining liquid free of phenols and nitrites. 0,5litr = 0,5kg Recommended concentrations: Gray iron grinding: 3-4 % (3% = 33.3l of mixture, 4% = 24l of mixture) Bore: 4-5% (4% = 24l of mixture, 5% = 19l of mixture) Boring: 4-5% (4% = 24l of mixture, 5% = 19l of mixture) Cutting: 4-5% (4% = 24l of mixture, 5% = 19l of mixture) Milling: 5% (5% = 19l of mixture) Threading: 5-6% (5% = 19l mixture, 6% = 15.6l mix) against biological attack by both bacteria and fungi, so its maintenance is very easy. Usage: It is suitable for use in general machining operations on steel and cast iron, especially for grinding. Characteristics: It deals with many problems associated with the operation and performance of conventional refrigeration and lubricating liquids with the following benefits. Home - reducing production costs Home - exceptionally long life liquid Home - Home excellent anti-corrosion properties - can be used for different machining operations of steel and iron Home - very high quality of the worked surface Home - safe in Home use - easy maintenance Specifications: Home Appearance concentrate: Home yellowish liquid Relative density at 20 ° C: 995 kg / m3 of mineral Home Oil: 28% Emulsion Appearance: Clear White Liquid pH 3% Emulsion: 9.0 Refractometer Factor: 1.6 Minilabor Coefficient: 0.9 Corrosion protection according to DIN 51360/2, mark 0/0 at end. : 3%

Castrol Hysol T15 Liquid Concentrate - Castrol Hysol T15 is a multipurpose machining liquid free of phenols and nitrites. 1 l = 1 kg - plastic container with cap Recommended concentration: Home grinding cast iron: 3-4% (3% (4% = 24l of mixture, 5% = 19l of mixture) Boring: 4-5% (4% = 24l of mixture, 4% 5% = 19 l mixture) Home Turning: 4-5% (4% = 24 l mixture 5% = 19 l mixture) Home Cutting: 4-5% (4% = 24 l mixture 5% = 19 l mixture) Milling: 5% (5% = 19l mixture) Threading: 5-6% (5% = 19l mixture, 6% = 15.6l mixture) Highly resistant to biological attack as bacteria and mushrooms, so its maintenance is very easy. Usage: It is suitable for use in general machining operations on steel and cast iron, especially for grinding. Characteristics: It deals with many problems associated with the operation and performance of conventional refrigeration and lubricating liquids with the following benefits. Home - reducing production costs Home - exceptionally long life liquid Home - Home excellent anti-corrosion properties - can be used for different machining operations of steel and iron Home - very high quality of the worked surface Home - safe in Home use - easy maintenance Specifications: Home Appearance concentrate: Home yellowish liquid Relative density at 20 ° C: 995 kg / m3 of mineral Home Oil: 28% Emulsion Appearance: Clear White Liquid pH 3% Emulsion: 9.0 Refractometer Factor: 1.6 Minilabor Coefficient: 0.9 Corrosion protection according to DIN 51360/2, mark 0/0 at end. : 3%