Lever gauge - pupitas, alarm clock 33mm, KMITEX
| UNC no.1 x 64 |
On request
|
14,80 € with VAT |
| UNC no.2 x 56 |
In stock
(1x)
|
14,80 € with VAT |
|
In stock
(19x)
|
2,43 € with VAT | |
| UNC no.3 x 48 |
On request
|
14,35 € with VAT |
| UNC no.4 x 40 |
On request
|
13,24 € with VAT |
| UNC č.5 x 40 |
On request
|
13,24 € with VAT |
| UNC č.6 x 32 |
On request
|
13,24 € with VAT |
| UNC č.8 x 32 |
On request
|
13,24 € with VAT |
| UNC č.10 x 24 |
On request
|
13,24 € with VAT |
| UNC č.12 x 24 |
On request
|
13,24 € with VAT |
| UNC 1/4" x 40 |
On request
|
12,56 € with VAT |
| UNC 5/16" x 18 |
On request
|
14,35 € with VAT |
| UNC 3/8" x 16 |
On request
|
15,92 € with VAT |
| UNC 7/16" x 14 |
On request
|
18,50 € with VAT |
| UNC 1/2" x 13 |
On request
|
20,74 € with VAT |
| UNC 9/16" x 13 |
On request
|
25,68 € with VAT |
| UNC 5/8" x 11 |
On request
|
28,04 € with VAT |
| UNC 3/4" x 10 |
On request
|
28,04 € with VAT |
| UNC 7/8" x 9 |
On request
|
47,99 € with VAT |
| UNC 1" x 8 |
On request
|
47,99 € with VAT |
| UNC 1 1/8" x 7 |
On request
|
72,54 € with VAT |
| UNC 1 1/4" x 7 |
In stock
(1x)
|
72,54 € with VAT |
| UNC 1 3/8" x 6 |
On request
|
72,54 € with VAT |
|
On request
|
45,67 € with VAT | |
| UNC 1 1/2" x 6 |
On request
|
72,54 € with VAT |
| UNC 1 5/8" x 5 |
On request
|
129,62 € with VAT |
| UNC 1 3/4" x 5 |
On request
|
198,00 € with VAT |
| UNC 1 7/8" x 4,5 |
On request
|
198,00 € with VAT |
|
In stock
(7x)
|
9,97 € with VAT | |
| UNC 2" x 4,5 |
On request
|
198,00 € with VAT |
|
In stock
(13x)
|
1,25 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 8595192310522
- Brand:
- KMITEX s.r.o
- Warranty:
- 24 months
- Code:
- KCZ-1156.3
Product information
Diameter Alarm 33mm
Splitting 0,01mm
Step 0.8mm
Tape Length: 11mm
The gauge is equipped with three-way clamping strips. Two clamping shanks - diameter 4 and 8mm are also included
ČSN EN ISO 46325 (ČSN 251820 / CSN 25 1820)
Variants
Accessories
-
Magnetic stand for dial indicator, indicator - central
Indicator holder, magnetic stand for indicators, deflection meters with central locking / central locking For indicators with clamping diameter: 8mm (can be clamped behind a prism) Length of arms: 335mm (arms 160mm and 175mm) Pressure 588N Dimensions of the base: 63x50x55 With this type of stand, you lock all the joints with one screw, delicate construction The indicator can be attached to this stand by its cylindrical part (diameter 8mm), but also by the lug, if the indicator is equipped with it.
In stock32,07 € with VAT -
Magnetic stand for dial indicator, indicator - classic, 80kg
Indicator holder, magnetic stand for indicators, gauges Pressure: 80 kg (800N) Base dimensions: 63x50x55 Shoulder length: 175mm fixed and 150mm adjustable Classic stand for indicators, screws, soft construction In this stand the indicator can be clamped behind its cylindrical part (diameter 8mm), but also behind the tab if the indicator is equipped with it. Dial indicators / indicators are not included. You can find them in the "Gauges", "Indicators - Gauges" section: http://www.kovonastroje.cz/Meridla/Indikatory-uchylkomery/
On request15,74 € with VAT -
Magnetic stand for dial indicator, indicator - central hydraulic, L = 380mm
Hydraulic stand for indicators with magnetic base and central locking / central locking Distance from table top to clamping eye for indicator: 420mm Magnetic compression: 784N Magnet dimensions: 50x60mm Centrally tighten one screw. At the end of the upper arm is a fine building that is sewn separately. Thanks to the hydraulic design, the stand is more accurate and sturdy. The magnetic base is from the bottom of the prism. Hydraulic stands should NOT be stored tight (eg overnight). The stand should not be tightened for more than 5 hours.
In stock47,37 € with VAT -
Magnetic stand for dial indicator, indicator - central aluminum
Manetized Dial Stand with Central Lock / Central Lock The arms are made of aluminum (ALU), making them lighter. One-screw central tightening. Clamping force of magnet 784N The end of the arm is fine, this is set separately. The magnetic base is from the bottom of the prism. Base Dimensions: 50x60mm Max. arm length from base to tailgate: 275mm
In stock34,73 € with VAT -
Magnetic stand for dial indicator, indicator - articulated, KMITEX
Articulated manege stand for dial gauges. Very flexible because it is composed of individual articles. Strands in the middle of the strands can be variously styled to achieve different positions of the shoulders. Length: 360mm Magnetic clamping force 294 N Magnetic base has a bottom and two sides of the prism. Base dimensions: 54x40x50mm
On request151,64 € with VAT
Alternatives
-
Lever gauge - pupitas with ruby ??touch 0-0.8mm, alarm clock 32mm with calibration
Setin dial indicator, gauge (watch) - pupitas with ruby ??touch !!. Alarm clock diameter 32mm, resolution 0.01mm. Measurement Step 0.8mm. Adapters for mounting in 3 axes. Calibration protocol is included.
On request49,59 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!