Lathe turning insert holder TSSNR , AKKO
Recommended ✓
Variant:
| 20x20mm / SNMG 1204 |
In stock
(2x)
|
85,70 € with VAT |
| 25x25mm / SNMG 1204 |
In stock
(1x)
|
86,94 € with VAT |
| 25x25mm / SNMG 1506 |
In stock
(1x)
|
89,42 € with VAT |
| 32x32mm / SNMG 1204 |
In stock
(1x)
|
98,12 € with VAT |
| 32x32mm / SNMG 1506 |
On request
|
103,09 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- Brand:
- AKKO
- Warranty:
- 24 months
Product information
Right holder for exchangeable inserts / knife for external turning,
clamping with thumb via clamp from above
Clamping dimensions: according to the selected variant
Designation of the plates that fit into the holder: according to the selected variant
A key for changing the plate is supplied with the goods.
The plate is not part of the package, it can be purchased separately.
General information on choosing the right holder:
Holders type "S" - with screw clamping are suitable for common to finishing operations. They are suitable for smaller material removals. The inserts in these holders have a positive insert back, which enables sharper insert geometries and thus the possibility of achieving a better surface quality.
Holders of type "P", "M", "T", "C" and "D" with clamping per inch or clamp are suitable for common to roughing operations - they have higher rigidity. The inserts in these holders have a negative (straight) insert back, thanks to which the inserts do not break out / deform so much and it is possible to roughen them with better and to machine even harder machinable materials.
Clamping dimensions: according to the selected variant
Designation of the plates that fit into the holder: according to the selected variant
A key for changing the plate is supplied with the goods.
The plate is not part of the package, it can be purchased separately.
General information on choosing the right holder:
Holders type "S" - with screw clamping are suitable for common to finishing operations. They are suitable for smaller material removals. The inserts in these holders have a positive insert back, which enables sharper insert geometries and thus the possibility of achieving a better surface quality.
Holders of type "P", "M", "T", "C" and "D" with clamping per inch or clamp are suitable for common to roughing operations - they have higher rigidity. The inserts in these holders have a negative (straight) insert back, thanks to which the inserts do not break out / deform so much and it is possible to roughen them with better and to machine even harder machinable materials.
Variants
Do you need advice?
Jakub Novák, Orders
How do customers see us?
"levně, rychle, spolehlivě"
"vše OK"
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!