Lathe turning insert holder TCMNN , AKKO
Variant:
| 16x16mm / TNMG 1204 |
On request
|
83,13 € with VAT |
| 20x20mm / TNMG 1204 |
On request
|
85,62 € with VAT |
| 25x25mm / TNMG 1204 |
On request
|
86,85 € with VAT |
| 25x25mm / TNMG 1606 |
On request
|
89,33 € with VAT |
| 32x32mm / TNMG 1606 |
On request
|
102,98 € with VAT |
| 32x32mm / TNMG 1204 |
On request
|
98,02 € with VAT |
| 40x40mm / TNMG 1606 |
On request
|
162,54 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- Brand:
- AKKO
- Warranty:
- 24 months
Product information
Front holder for interchangeable inserts / knife for external
turning, thumb clamping
Clamping dimensions: according to the selected variant
Marking of plates that fit into the holder: according to the selected variant
A key for changing the plate is supplied with the goods.
The plate is not part of the package, it can be purchased separately.
General information on choosing a suitable holder:
Type "S" holders - with screw clamping are suitable for normal to finishing operations. They are suitable for smaller removals of material. The inserts for these holders have a positive back of the insert, which enables a sharper geometry of the inserts and thus the possibility of achieving a better surface quality.
P, "M" , "T" , "C" and "D" type holders with thumb or clamp clamping are suitable for normal to roughing operations - they have higher rigidity. The inserts for these holders have a negative (straight) back of the insert, thanks to which the inserts do not break / deform so much and it is possible to rough them and machine better / longer even harder-to-machine materials.
Clamping dimensions: according to the selected variant
Marking of plates that fit into the holder: according to the selected variant
A key for changing the plate is supplied with the goods.
The plate is not part of the package, it can be purchased separately.
General information on choosing a suitable holder:
Type "S" holders - with screw clamping are suitable for normal to finishing operations. They are suitable for smaller removals of material. The inserts for these holders have a positive back of the insert, which enables a sharper geometry of the inserts and thus the possibility of achieving a better surface quality.
P, "M" , "T" , "C" and "D" type holders with thumb or clamp clamping are suitable for normal to roughing operations - they have higher rigidity. The inserts for these holders have a negative (straight) back of the insert, thanks to which the inserts do not break / deform so much and it is possible to rough them and machine better / longer even harder-to-machine materials.
Variants
Do you need advice?
Jakub Novák, Orders
How do customers see us?
"levně, rychle, spolehlivě"
"vše OK"
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!