Lathe mandrels

Fixed turning mandrel with driving surfaces / conical clamping mandrel Nominal diameter d: according to the selected variant Other dimensions and dimensions - see product description for individual variants Kuželovist: 1: 2000 Standard: ČSN 243350 Turning mandrels are made of high quality steel, hardened and ground The thorns are conical The size of the mandrel is marked on the larger diameter side Mandrels are mainly used for machining smaller rotating objects that already have a machined hole The object to be machined slides on the smaller side of the mandrel and moves until it is caught on the conical surface of the mandrel To achieve greater accuracy, it is recommended to clamp the mandrel between the points. The rotation is then ensured by a heart carrier, which is attached to the side of the mandrel with a flat.

Fixed turning mandrel with driving surfaces / conical clamping mandrel Nominal diameter d: according to the selected variant Other dimensions and dimensions - see product description for individual variants Kuželovist: 1: 2000 Standard: made according to DIN, resp. replacement for ČSN 243350, see drawing Turning mandrels are made of high quality steel, hardened and ground The thorns are conical The size of the mandrel is marked on the larger diameter side Mandrels are mainly used for machining smaller rotating objects that already have a machined hole The object to be machined slides on the smaller side of the mandrel and moves until it is caught on the conical surface of the mandrel To achieve greater accuracy, it is recommended to clamp the mandrel between the points. The rotation is then ensured by a heart carrier, which is attached to the side of the mandrel with a flat.

Fixed turning mandrel with driving surfaces / conical clamping mandrel Trn comes from above-standard stock, manufacturer Zbrojovka Vsetín, may not be in 100% condition, may be used. Nominal diameter d: according to the selected variant Other dimensions - see product description for individual variants / on request Conic: 1:2000 Lathe mandrels are made of high quality steel, hardened and ground Thorns are conical The size of the mandrel is marked on the side of the larger diameter Mandrels are mainly used when machining smaller rotary objects that already have a hole machined The workpiece slides onto the smaller side of the mandrel and moves until it catches on the conical face of the mandrel To achieve greater accuracy, it is recommended to clamp the mandrel between the tips. Rotation is then ensured by a heart driver, which is attached to the side of the mandrel equipped with a flat surface. Standard: ČSN 243350

Expanding lathe with morse taper Nominal diameter d: according to the selected variant Other dimensions - see enclosed catalog sheet Standard: ČSN 2433575 Excess stock, unused, dried petroleum jelly.

Expanding lathe with morse taper Nominal diameter d: according to the selected variant Other dimensions - see enclosed catalog sheet Standard: ČSN 2433575, design with push-off nut for easy punching of the mandrel from the spindle Excess stock, unused, dried petroleum jelly.

Double-sided turning insert, changeable, VBD CNMG 120408 - GS PC9030 - specially for INOX - stainless steel Radius 0,8mm Cutting edge length: 12,7mm Height: 4,76mm Clamping hole diameter: 5,16mm Clamping type: thumb Number of uses: 4 TiAlN Fn = 0,10-0,50 Vc = 1 , 00-5,00 Application: Steel P20-P30, M30-M40 Stainless Steel, Especially for Stainless Steel Suitable Use: Medium to Finish