Lathe knife S25S PCLNL 12 C for hole, AKKO

Turning insert VBD CNMG 120404 PP IC830 Radius 0,4mm Coating: PVD, AlTiN TiN IC830 series: Suitable for intermittent cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Application: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms - see attached photo PP type: Ideal for machining very sticky materials under normal cutting conditions. Suitable for heat-resistant steel, stainless steel, aluminum alloys and mild carbon steel. Contact the Company: Kat. Ä. : 5567678 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Double-sided turning insert, insert, insert CNMG 120404 - HM NC3030 Radius 0.4 mm Cutting length edges: 12,7mm Height: 4,76mm Clamping hole diameter: 5,16mm Clamping method: thumb Number of uses: 4 Sheet material: NC3030 - Suitable for machining steels at medium to low speeds. Excellent wear resistance, chipping and high temperature stability due to Al2O3 coating. Excellent stability under various grip conditions. Coating: MT-CVD: TiCN TiC Al2O3 TiN Application: Steel: P25-P35 Stainless steel: M15-M25 Recommended feed: see attached PDF file or photo LamaÄ HM: Suitable for normal machining, for uninterrupted and interrupted ovanA1 A ™ ez. Suitable for high-speed machining, higher feeds, CNC machining. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Double-sided turning insert, replaceable insert, insert CNMG 120408 - B25 PC5300, KORLOY Radius 0.8mm Length A ™ Cutting edges: 12.7mm Height: 4.76mm Clamping hole diameter: 5.16mm Clamping method: thumb Number of uses: 4 < br> Sheet material: PC5300: Universal range for machining steel, cast iron, heavy-duty machinable materials and stainless steel. High resistance to breakage and build-up for stable machining. Ideal for intermittent cutting. Coating: MT-PVD, TiCN(Titanium Carbon Nitride), TiN(Titanium Nitride), Al2O3 Application: Steel: P30- P40(hard steel) Stainless steel: M20-M30 Cast iron: K20-K30 Refractory alloys: S15-S25 Breaker B25: Smooth universal breaker for normal machining. Long continuous chip. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Double-sided turning insert, replaceable insert, insert CNMG 120404 - B25 PC5300, KORLOY Radius 0.4mm Length A ™ Cutting edges: 12.7mm Height: 4.76mm Clamping hole diameter: 5.16mm Clamping method: thumb Number of uses: 4 < br> Sheet material: PC5300: Universal range for machining steel, cast iron, heavy-duty machinable materials and stainless steel. High resistance to breakage and build-up for stable machining. Ideal for intermittent cutting. Coating: MT-PVD, TiCN(Titanium Carbon Nitride), TiN(Titanium Nitride), Al2O3 Application: Steel: P30- P40(hard steel) Stainless steel: M20-M30 Cast iron: K20-K30 Refractory alloys: S15-S25 Breaker B25: Smooth universal breaker for normal machining. Long continuous chip. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Double-sided turning insert, replaceable insert, insert CNMG 120408 - HM PC5300 Radius 0.8 mm Cutting length edges: 12,7mm Height: 4,76mm Clamping hole diameter: 5,16mm Clamping method: thumb Number of uses: 4 Sheet material: PC5300: Universal range for machining steel, cast iron, heavy-duty machinable materials and stainless steel. High resistance to breakage and build-up for stable machining. Ideal for intermittent cutting. Coating: MT-PVD, TiCN(Titanium Carbon Nitride), TiN(Titanium Nitride), Al2O3 Application: Steel: P30- P40( hard steel) Stainless steel: M20-M30 Cast iron: K20-K30 Refractory alloys: S15-S25 HM breaker: Suitable for common gears Â!R , intermittent and intermittent cutting. Suitable for high-speed machining, higher feeds, CNC machining. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Lathe insert VBD CNMG 120404 - AL H01 Radius: 0,4mm Coating: uncoated, polished surface Series H01: Suitable for routine and finishing operations - for non-ferrous metals and plastics. Usage: Non-ferrous metals and plastics: N05-N25 Cutting conditions: Vc = 100-200m / min < br> fn = 0.03-0.50 mm / rev. ap = 0,1-5,0 mm Type AL: Very sharp breaker for machining aluminum, plastic. Excellent for machining soft non-ferrous metals and their alloys. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Double-sided turning insert, replaceable insert, insert CNMG 120408 - MK NC6315 Radius 0.8 mm Cutting length edges: 12,7mm Height: 4,76mm Clamping hole diameter: 5,16mm Clamping method: thumb Number of uses: 4 Sheet material: NC6315: Universal series for machining steel, cast iron, heavy-duty machinable materials and stainless steel. High resistance to breakage and build-up for stable machining. Ideal for intermittent cutting. Coating: CVD - MT-TiCN Al2O3 Application: Cast iron: K10-K20 Refractory alloys: S15-S25 < br> LamaÄ MK: Suitable for uninterrupted cuts for ductile and gray cast iron during high-speed machining(high speed and feeds). Improved rigidity of the plate against breakage due to the flat shape of the breaker. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD CNMG 120408 GN IC830 Radius 0,8mm Coating: PVD, AlTiN TiN IC830 Series: Suitable for intermittent cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Application: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms - see attached photo Type GN: Universal use in common cutting conditions. Contact the Company: Kat. Ä. : 5509498 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

VBD SNMG 120408E-R; 6630 Radius 0,8mm Slices design suitable for machining: steel, stainless steel, cast iron Material of the blade: 6630 Usage: Steel: P15-P35 Stainless Steel: M10-M30 Cast Iron: K20-K30 | code: 80000011

Turning insert VBD CNMG 120408 GN IC5005 Radius 0,8mm Coating: CVD, TiCN Al2O3 TiN IC5005 series: Hard substrate with multilayer MTCVD TiCN coating and thick layer of Al2O3 coating with post-coating surface treatment. It is mainly used for machining nodular cast iron( and other cast irons) at medium to high cutting speeds at stable or slightly unstable conditions. It is also used with a higher requirement for wear resistance compared to IC5010 carbide or other grades. Application: Steel: P05-P15 Cast iron: K05-K20 Hardened steel: H15-H25 Special conditions - see appendix © photo Type GN: Universal use in common cutting conditions. Contact the Company: Kat. Ä. : 5507730 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD CNMG 120404 TF IC830 Radius 0,4mm Coating: PVD, AlTiN TiN IC830 series: Suitable for intermittent cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Usage: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms and conditions - see attached photo Type TF: Universal use in common cutting conditions. Suitable for carbon and alloy steels and heat-resistant alloys Cat. Ä. : 5567678 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.