Lathe knife PDJNR 4040 S15 C, AKKO
16x16mm / DNMG 1104 |
In stock
(1x)
|
83,13 € with VAT |
20x20mm / DNMG 1104 |
In stock
(2x)
|
85,62 € with VAT |
20x20mm / DNMG 1506 |
In stock
(1x)
|
85,62 € with VAT |
25x25mm / DNMG 1104 |
In stock
(1x)
|
86,85 € with VAT |
25x25mm / DNMG 1506 |
In stock
(1x)
|
86,85 € with VAT |
32x32mm / DNMG 1506 |
In stock
(2x)
|
98,02 € with VAT |
40x40mm / DNMG 1506 |
On request
|
172,47 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000436051
- Brand:
- AKKO
- Warranty:
- 24 months
- Code:
- A-PDJNR-4040-S15C
Product information
°
External turning tool PDJNR-4040S15C, 93 Â °
The size is lower r: 40x40 mm
Beam angle: -6A ‚Â °
Blade angle: -6A ‚Â °
Height of running plates: 40mm
Total Knife length: 250mm
Interchangeable plates are marked DNM. 1506 ..(ie DNMA 1506 .., DNMG 1506 .. etc.)
A key for exchanging the wafer is supplied with the goods.
Variants
Accessories
-
Interchangeable insert DNMG 150604ER-SI; T9325, PRAMET
Universal double-sided turning insert, replaceable, VBD DNMG 150604 ER-SI T9325 Radius: 0,4mm Material of the blade: T9325 Application : Roughing Steel: P15-P35 Stainless Steel: M10-M25 Cast Iron: K20-K35 Superslitz: S20-S30 80015677
In stock17,52 € with VAT -
Replaceable insert DNMG 150604-NF IC8250, Iscar
DNMG 150604 NF IC8250 Radius 0,4mm Coating: CVD, TiCN Al2O3 TiCN TiN IC8250 Series: Hard cobalt substrate with MTCVD TiCN and Al2O3 CVD coating. Suitable for conventional steel machining - roughing up to finishing - wide range of engagement conditions. High hardness and abrasion resistance. Usage: Steel: P10-P35 Stainless Steel: M05-M20 Types of NF: Suitable for common and finishing operation. Kat. No. 5550328
In stock16,15 € with VAT -
Replaceable insert DNMG 150612-M3P IC8250, Iscar
DNMG 150612 - M3P IC8250 IC8250 Series: Hard substrate with cobalt admixture with MTCVD TiCN and Al2O3 CVD coating. Suitable for conventional steel machining - roughing up to finishing - wide range of engagement conditions. High hardness and abrasion resistance. Usage: Steel: P10-P35 Stainless Steel: M05-M20 M3P: for steel machining, good chip removal, small cutting forces, smooth clean surface. Kat. No .: 5567489
In stock15,63 € with VAT -
Replaceable insert DNMG 150608-GN IC830, Iscar
Blade DNMG 150608 GN IC830 IC830 Series: < Suitable for intermittent cut and roughing of stainless steel, classical steels and heat-resistant alloys. High stiffness and wear resistance. Usage: Steel: P20-P40 Stainless Steel: M25-M35 Superslitz: S15-S30 Terms and conditions - see attached photo Type GN: Universal for normal cutting conditions. Kat. No .: 3308095
In stock14,53 € with VAT -
Replaceable insert DNMG 150404-HM NC3030, Tornado
Double-sided turning insert, replaceable slit, VBD DNMG 150404 - HM NC 3030 Radius 0,4mm Cutting edge length: 14,7mm Height: 4,76mm Diameter of clamping hole: 5,16mm Steel Steel (P20-P35) Stainless Steel (M15-M30) Recommended feed: see enclosed PDF file The price is for 1 piece, not for the whole package (10pcs).
In stock7,79 € with VAT -
Replaceable insert DNMG 150408-HM NC3020, Tornado
Double-sided turning insert, replaceable insert, insert DNMG 150408 - HM NC 3020 Radius 0.8 mm Cutting edge length: 14.7mm Height: 4.76mm Clamping hole diameter: 5.16mm Clamping method: thumb Number of uses: 4 Blade material: NC3020 - Suitable for high-speed machining of steels at medium to high speeds. Excellent wear resistance, chipping and high temperature stability due to Al2O3 coating. Coating: MT-CVD: TiCN Al2O3 TiN Application: Steel: P15-P25 Recommended feed: see Attached PDF file LamaÄ HM: Suitable for normal machining, for uninterrupted and intermittent cutting. Suitable for high-speed machining, higher feeds, CNC machining. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.
In stock7,79 € with VAT -
Replaceable insert DNMG 150408-GN IC830, Iscar
Blade DNMG 150408 GN IC830 IC830 Series: < Suitable for intermittent cut and roughing of stainless steel, classical steels and heat-resistant alloys. High stiffness and wear resistance. Usage: Steel: P20-P40 Stainless Steel: M25-M35 Superslitz: S15-S30 Terms and conditions - see attached photo Type GN: Universal for normal cutting conditions. Kat. No .: 5568614
In stock13,65 € with VAT -
Interchangeable insert DNMG 150604E-M; 6630, PRAMET
Universal double-sided lathe insert, replaceable insert, insert DNMG 150604 EM 6630 Radius: 0,4mm Insert height ka: 6,35mm Sheet material: 6630 Application: Medium - common Steel: P15 -P35 Stainless steel: M10-M30 Cast iron: K20-K30 Superalloys: S15-S25 Ord. Ä. : 80004115 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.
In stock18,15 € with VAT -
Replaceable insert DNMG 150408ER-SI; T8330, PRAMET
Clearance saleUniversal double-sided lathe insert, replaceable insert, insert DNMG 150408 ER-SI T8330 Radius: 0.8mm Height plate: 4.76mm Sheet material: T9325 Use: Roughing Steel: P25-P40 < br> Stainless steel: M20-M35 Cast iron: K20-K40 Non-ferrous metals: N15-N30 Superalloys: S15-S25 80016449 !The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.
In stock16,69 € with VAT
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!