Lamellar blocks
-
Lamellar block with longitudinal polarization for magnetic clamps
Lamella magnetic block, induction pads Suitable for permanent magnets and electromagnets. Width x Length x Height: according to the selected variant Pole pitch: 3mm steel, 1mm brass The minimum order quantity is 1-3 pieces depending on the size. Contact us for more information. Lamella blocks make it possible to create an optimal clamping surface for workpieces that, due to their shape, cannot be clamped on the classic surface of a magnetic clamping plate. It is also used to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the clamped workpiece. Another advantage is the possibility of additional processing (machining) of this block for differently shaped workpieces. Compared to cheap lamellar blocks from other manufacturers (e.g. Vertex), these blocks are not glued, but soldered - in significantly higher quality. Blocks can be cut in half and modified according to current needs.
Price - On request -
Lamellar block with transverse polarity for magnetic clamps
Lamella magnetic block, induction pads Suitable for permanent magnets and electromagnets. Width x Length x Height: according to the selected variant Pole pitch: 3mm steel, 1mm brass The minimum order quantity is 1-3 pieces depending on the size. Contact us for more information. Lamella blocks make it possible to create an optimal clamping surface for workpieces that, due to their shape, cannot be clamped on the classic surface of a magnetic clamping plate. It is also used to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the clamped workpiece. Another advantage is the possibility of additional processing (machining) of this block for differently shaped workpieces. Compared to cheap lamellar blocks from other manufacturers (e.g. Vertex), these blocks are not glued, but soldered - in significantly higher quality. Blocks can be cut in half and modified according to current needs.
Price - On request -
Lamella block (2pcs) for magnetic clamps 35x16x60mm, VCP-0
Lamella magnetic block, induction pads Pole spacing: Suitable for permanent magnets and electromagnets. Width: 35mm Height: 16mm Length: 60mm The lamellar blocks allow you to create an optimal clamping surface for workpieces that, due to their shape, cannot be clamped on the classic surface of the magnetic clamping plate . It is also used to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the clamped workpiece. Another advantage is the possibility of additional processing (machining) of this block for differently shaped workpieces. Order no. no.: 2015-400
On request127,76 € with VAT -
Set of lamella blocks for magnetic clamps, VCP-6
Set contains 8 pcs of lamellar magnetic blocks of the following dimensions: 2x flat 46x60x15, pole pitch 2 2,5mm 4x flat 50x100x25, pole pitch 2,5 3mm 2x with double V-groove 9 and 18mm , 57x49x46, pole pitch 3,5 3,5mm Suitable for permanent magnets and electromagnets. Laminar prismatic blocks allow you to create an optimal clamping surface for workpieces that can not be clamped onto the classical surface of a magnetic clamping plate for their shape. It also serves to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the workpiece. Another benefit is the possibility of additional machining (machining) of this block for differently shaped workpieces. Obj. No. 2015-410
In stock256,17 € with VAT -
Lamellar prismatic block for magnetic clamps 74x45x110mm, VCP-29
Set of 2 pcs of precisely ground pair of lamella prismatic cubes with switch Suitable for permanent magnets and electromagnets. Width: 110mm Height: 74mm Length: 45mm Prism width: 60mm Prism clamping force: 17kg < br> Lamellar prismatic blocks make it possible to create an optimal clamping surface for workpieces which, due to their shape, cannot be clamped to the classic flat magnetic clamping plate. It is also used to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field fixture is not suitable for clamping the workpiece. Ord. Ä. : 2015-521
In stock225,28 € with VAT -
Lamellar prismatic block for magnetic clamps 100x50x150mm, VCP-30
Set of 2 pcs of precisely ground pair of lamella prismatic cubes with switch Suitable for permanent magnets and electromagnets. Width: 150mm Height: 100mm Length: 50mm Prism width: 90mm Prism clamping force: 23kg < br> Lamellar prismatic blocks make it possible to create an optimal clamping surface for workpieces which, due to their shape, cannot be clamped to the classic flat magnetic clamping plate. It is also used to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field fixture is not suitable for clamping the workpiece. Ord. Ä. : 2015-522
In stock215,34 € with VAT -
Lamellar prismatic block for magnetic clamps 100x100x100mm, VCP-31
Lamellar prism - magnetic block, induction prismatic cube with switch Suitable for permanent magnets and electromagnets. Width: 100mm Height: 100mm Length: 100mm Width of prism: 26mm Clamping force of prism: 25kg Clamping base force: 50kg < br> Lamellar prismatic blocks make it possible to create an optimal clamping surface for workpieces which, due to their shape, cannot be clamped to a classic flat magnetic clamping plate. It is also used to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field fixture is not suitable for clamping the workpiece. Ord. A „. : 2015-530
On request462,00 € with VAT -
Lamellar prismatic block for magnetic clamps 150x150x150mm, VCP-32
Lamellar prism - magnetic block, induction prismatic cube with switch Suitable for permanent magnets and electromagnets. Width: 150mm Height: 150mm Length: 150mm Prism width: 32mm Clamping force prisms: 50kg Clamping base force: 140kg Lamellar prismatic blocks make it possible to create an optimal clamping surface for workpieces which, due to their shape, cannot be clamped to a classic flat magnetic clamping plate. It is also used to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field fixture is not suitable for clamping the workpiece. Ord. Ä. : 2015-531
In stock682,38 € with VAT -
Lamellar block for magnetic clamps 1240x297x24, Czech production
Clearance saleLamella magnetic block, pole plate Suitable for permanent magnets and electromagnets. Length: 1240mm Width: 297mm Height: 24mm Slat width: 4 25 4 19 4mm Slat blocks and additional pole plates are used as accessories for rectangular or circular clamps, which greatly increase their usability. This accessory can sit on the fixture freely or is secured mechanically. Thus, the standard clamp can be adapted to clamp an irregularly shaped part without the need to machine the surface of the clamp. These auxiliary tools can be modified to suit each workpiece without limiting the functionality of the machine and fixture. Lamellar blocks and additional pole plates are not magnetic in themselves, but only conduct the magnetic flux. They are composed of fine steel lamellas, divided by brass lamellas, everything is soldered with silver. We supply lamella blocks for both circular and rectangular clamps. They can be installed freely or mechanically using screws or pins. They expand the possibilities of using the clamp by clamping uneven or non-uniform material. Advantages: - The possibility of machining to the desired shape to adapt to different components - The possibility of transverse and longitudinal polarization - They can be used to soften the magnetic field clamps for clamping even otherwise too small or thin workpieces - They can also be used as a lateral support in the case of grinding workpieces with a small overall contact surface with the clamp ( e.g. hollow thin-walled profiles) The pole plate comes from from excess stock, is unused.
In stock602,01 € with VAT -
Lamellar prismatic block for magnetic clamps 60x48x100mm, VCP-3A
Lamellar prism magnetic block Poles pitch: 2,5 3mm Suitable for permanent magnets and electromagnets. Width: 60mm Height: 48mm Length: 100mm Laminar Prismatic Blocks allow you to create an optimal clamping surface for workpieces that can not be clamped on to the classical surface of a magnetic clamp plates. It also serves to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the workpiece. Another benefit is the possibility of additional machining (machining) of this block for differently shaped workpieces.
In stock38,91 € with VAT