Korea

Interchangeable insert CCMT 120408 - HMP NC3030 Radius: 0.8mm Blade material: NC3030 - Suitable for machining steels at medium to low speeds. Excellent wear resistance, high temperature stability due to Al2O3 coating. Excellent stability under various engagement conditions. Coating: MT-CVD: TiCN TiC Al2O3 TiN Application: Steel: P25-P35 Stainless steel: M15-M25 Type HMP: Medium to finishing breaker geometry for small chips. The wider wall of the breaker prolongs the life of the insert - even when the depth of cut suddenly changes. The price is for 1 piece, not for the whole package, if you want to buy the whole package, add 10 pieces to the cart. Cat. No.:102023637

Double-sided turning insert, replaceable insert, VBD CNMG 090304-MP NC3225 Radius 0.4mm Cutting edge length: 12.7mm Height: 4.76mm Clamp diameter hole: 5.16mm Clamping method: thumb Number of uses: 4 Blade material: NC3225 - universal series suitable for machining automotive castings and bearing steel, for continuous and interrupted cuts. High chipping resistance, high temperature stability thanks to Al2O3 coating. Coating : MT-CVD : TiCN Al2O3 TiCN Usage : Steel : P20-P25 Type MP : Ideal choice for steels that have a hardened surface (, e.g. automotive and machine parts). Suitable for machining cast steel, bearing steel, etc. The breaker is very sharp with very good chip evacuation - even when machining rough/uneven surfaces. It makes a very good surface. The price listed is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Double-sided lathe insert, replaceable insert, VBD CNMG 090308-MP NC3225 Radius 0.8mm Cutting edge length: 12.7mm Height: 4.76mm Clamp diameter hole: 5.16mm Clamping method: thumb Number of uses: 4 Blade material: NC3225 - universal series suitable for machining automotive castings and bearing steel, for continuous and interrupted cuts. High chipping resistance, high temperature stability thanks to Al2O3 coating. Coating : MT-CVD : TiCN Al2O3 TiCN Usage : Steel : P20-P25 Type MP : Ideal choice for steels that have a hardened surface (, e.g. automotive and machine parts). Suitable for machining cast steel, bearing steel, etc. The breaker is very sharp with very good chip evacuation - even when machining rough/uneven surfaces. It makes a very good surface. The price listed is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Double-sided turning insert, replaceable insert, insert CNMG 120404 - B25 PC5300, KORLOY Radius 0.4mm Length A ™ Cutting edges: 12.7mm Height: 4.76mm Clamping hole diameter: 5.16mm Clamping method: thumb Number of uses: 4 < br> Sheet material: PC5300: Universal range for machining steel, cast iron, heavy-duty machinable materials and stainless steel. High resistance to breakage and build-up for stable machining. Ideal for intermittent cutting. Coating: MT-PVD, TiCN(Titanium Carbon Nitride), TiN(Titanium Nitride), Al2O3 Application: Steel: P30- P40(hard steel) Stainless steel: M20-M30 Cast iron: K20-K30 Refractory alloys: S15-S25 Breaker B25: Smooth universal breaker for normal machining. Long continuous chip. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Double-sided turning insert, insert, insert CNMG 120404 - HM NC3030 Radius 0.4 mm Cutting length edges: 12,7mm Height: 4,76mm Clamping hole diameter: 5,16mm Clamping method: thumb Number of uses: 4 Sheet material: NC3030 - Suitable for machining steels at medium to low speeds. Excellent wear resistance, chipping and high temperature stability due to Al2O3 coating. Excellent stability under various grip conditions. Coating: MT-CVD: TiCN TiC Al2O3 TiN Application: Steel: P25-P35 Stainless steel: M15-M25 Recommended feed: see attached PDF file or photo LamaÄ HM: Suitable for normal machining, for uninterrupted and interrupted ovanA1 A ™ ez. Suitable for high-speed machining, higher feeds, CNC machining. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Double-sided turning insert, replaceable insert, insert CNMG 120408 - B25 PC5300, KORLOY Radius 0.8mm Length A ™ Cutting edges: 12.7mm Height: 4.76mm Clamping hole diameter: 5.16mm Clamping method: thumb Number of uses: 4 < br> Sheet material: PC5300: Universal range for machining steel, cast iron, heavy-duty machinable materials and stainless steel. High resistance to breakage and build-up for stable machining. Ideal for intermittent cutting. Coating: MT-PVD, TiCN(Titanium Carbon Nitride), TiN(Titanium Nitride), Al2O3 Application: Steel: P30- P40(hard steel) Stainless steel: M20-M30 Cast iron: K20-K30 Refractory alloys: S15-S25 Breaker B25: Smooth universal breaker for normal machining. Long continuous chip. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Double-sided turning insert, changeable, VBD CNMG 120408 - GS PC9030 - specially for INOX - stainless steel Radius 0,8mm Cutting edge length: 12,7mm Height: 4,76mm Clamping hole diameter: 5,16mm Clamping type: thumb Number of uses: 4 TiAlN Fn = 0,10-0,50 Vc = 1 , 00-5,00 Application: Steel P20-P30, M30-M40 Stainless Steel, Especially for Stainless Steel Suitable Use: Medium to Finish

Double-sided turning insert, exchangable insert CNMG 120408 - HM NC3030 Radius 0.8 mm Cutting length edges: 12,7mm Height: 4,76mm Clamping hole diameter: 5,16mm Clamping method: thumb Number of uses: 4 Sheet material: NC3030 - Suitable for machining steels at medium to low speeds. Excellent wear resistance, chipping and high temperature stability due to Al2O3 coating. Excellent stability under various grip conditions. Coating: MT-CVD: TiCN TiC Al2O3 TiN Application: Steel: P25-P35 Stainless steel: M15-M25 Recommended feed: see attached PDF file or photo LamaÄ HM: Suitable for normal machining, for uninterrupted and interrupted ovanA1 A ™ ez. Suitable for high-speed machining, higher feeds, CNC machining. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Double-sided turning insert, replaceable insert, insert CNMG 120408 - HM PC5300 Radius 0.8 mm Cutting length edges: 12,7mm Height: 4,76mm Clamping hole diameter: 5,16mm Clamping method: thumb Number of uses: 4 Sheet material: PC5300: Universal range for machining steel, cast iron, heavy-duty machinable materials and stainless steel. High resistance to breakage and build-up for stable machining. Ideal for intermittent cutting. Coating: MT-PVD, TiCN(Titanium Carbon Nitride), TiN(Titanium Nitride), Al2O3 Application: Steel: P30- P40( hard steel) Stainless steel: M20-M30 Cast iron: K20-K30 Refractory alloys: S15-S25 HM breaker: Suitable for common gears Â!R , intermittent and intermittent cutting. Suitable for high-speed machining, higher feeds, CNC machining. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Double-sided turning insert, replaceable insert, insert CNMG 120408 - MK NC6315 Radius 0.8 mm Cutting length edges: 12,7mm Height: 4,76mm Clamping hole diameter: 5,16mm Clamping method: thumb Number of uses: 4 Sheet material: NC6315: Universal series for machining steel, cast iron, heavy-duty machinable materials and stainless steel. High resistance to breakage and build-up for stable machining. Ideal for intermittent cutting. Coating: CVD - MT-TiCN Al2O3 Application: Cast iron: K10-K20 Refractory alloys: S15-S25 < br> LamaÄ MK: Suitable for uninterrupted cuts for ductile and gray cast iron during high-speed machining(high speed and feeds). Improved rigidity of the plate against breakage due to the flat shape of the breaker. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert, replaceable insert for turning DCMT 070202 - HMP, PC9030 Radius 0,2mm Sheet material: PC9030 - universal grade - usable from roughing to finishing. Ideal for machining stainless steel. High resistance to chipping under constant working conditions. Coating: PVD, TiAlN(Titan Aluminum Nitride) Application: Stainless steel: M25-M35 LamaÄ HMP: Medium to finishing breaker geometry for small chips. The wider wall of the breaker prolongs the life of the insert - even with a sudden change in the depth of the cut. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Lathe insert, replaceable turning insert DCMT 070202 - MP , NC3225 Radius 0.2mm Coating : CVD , MT-TiCN Al2O3 TiN < Blade material: NC3225 - universal series suitable for machining automotive castings and bearing steel, for continuous and interrupted cuts. High chipping resistance, high temperature stability thanks to Al2O3 coating. Coating : MT-CVD : TiCN Al2O3 TiCN Usage : Steel : P20-P25 Type MP : Ideal choice for steels that have a hardened surface (, e.g. automotive and machine parts). Suitable for machining cast steel, bearing steel, etc. The breaker is very sharp with very good chip removal - even when machining rough/uneven surfaces. It makes a very good surface. The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket. Cat. no.: 102057566